* Don't write UT features until the end of TX/RX.
* Attempt 2 at preventing spurious Linux asan failures.
* Add PR #975 to changelog.
* Revert "Attempt 2 at preventing spurious Linux asan failures."
This reverts commit 8f53d1a980.
* Another attempt at preventing spurious asan failures.
* Revert back to k6aq.net hosted wheels.
* Resolve warnings in pipeline tests.
* ResampleStep: skip processing if no samples available.
* TapStep: execute in separate thread.
* Fix issue causing mic audio to stop when using Speex.
* Add a bit more time between loads.
* Use -O3 for libsamplerate to see if that helps.
* Revert "Add a bit more time between loads."
This reverts commit 1273d6531e.
* Disable content caching during CI build.
* Add printout of sysctl for debugging.
* Try speexdsp resampling to see if we can reduce CPU usage.
* Slightly increase quality.
* Increase quality again.
* Fix monitor functions not producing audio.
* Reenable Instruments tracing.
* Experiment: update librade to grab sync and SNR while running RX.
* Update SNR retrieval to make sure it happens on RX thread.
* Bump up resample quality again.
* Go back to libsamplerate.
* Use same semaphore wait time calculation for macOS as with other platforms.
* Try 20ms time quantum.
* Try 40ms.
* Back to 60ms.
* Wait needs to be based on start of work.
* Revert "Go back to libsamplerate."
This reverts commit 86d1c640ff.
* Try maximum quality on speex resampler first.
* Go back to calling fwrite() immediately on FIFO read.
* Revert resampler changes, again.
* Try experimental RADE branch again.
* Out of left field: try 2.9ms quantum like what Chrome uses.
* Improve reliability of Linux rade_loss test.
* Smooth out longer than expected semaphore waits on macOS.
* Fix compiler errors.
* Put quantum back to 60ms.
* Fix compiler error.
* More experimentation with time quantums.
* Use relaxed atomic semantics for macOS worker counter.
* Back to 2.9ms due to mpp test failures.
* Disable processing stats.
* Time quantum should match buffer size.
* Remove unneeded variable.
* Time quantum was accidentally getting set to 0.
* Try to reduce standard deviation for macOS wait time.
* Revert previous change, try just halving the wait time.
* Try to reduce likelihood of scheduler contention on macOS.
* macOS: Set lower thread QoS for non-audio threads.
* Using infinite wait for ThreadedObject.
* Force lowest possible latency.
* We can reference the activity ID directly.
* Avoid crash on stop from previous changes.
* Revert recent PulseAudioDevice changes in case those are causing 22.04 tests to fail.
* Try different macOS flag to improve responsiveness.
* Remove memset call from TX handling.
* Disable real-time threading on macOS.
* Use setiopolicy_np() to make sure writing RADE features doesn't interfere with the rest of the app.
* Resample input file for rade_loss test to lower CPU usage.
* Try soxr resampler for further CPU usage reductions.
* Forgot missed file.
* On macOS CI runs, we should also use the Homebrew soxr package.
* Revert soxr adoption, does not meet real time safety guidelines.
* Try deferring feature file writes until the end again.
* Turn on PYTHONOPTIMIZE.
* Read/write entire blocks from FIFO, not just single samples.
* Warning cleanup.
* Allow partial output if FIFO gets empty.
* Remove unneeded memset().
* Fix race condition preventing user from properly being hidden from FreeDV Reporter on startup.
* Downgrade additional pipeline threads to Utility QoS.
* Try malloc-free FIFO for RADE steps.
* Use 2048 samples instead.
* Use PreAllocatedFIFO in RADE steps to avoid cache misses.
* Use MKL enabled version of numpy for Intel macOS.
* Try Intel MKL version of PyTorch for macOS.
* Fix GH compiler issue on macOS ARM.
* Replace sleep_for with semaphore for TapStep.
* Only signal semaphore every 100ms like with previous sleep_based impl.
* Replace additional sleeps with semaphore waits.
* Fix compiler error.
* Adjust timing thresholds for dumping feature debug data.
* macOS: reenable real-time threading as a test.
* Make sure both RX and TX threads start processing at the same time.
* Update missed shared_ptr reference.
* Remove hidden allocation due to use of lambdas.
* Undo FIFO size reduction.
* Suppress spurious PlaybackStep completion messages.
* Fix CI compiler error.
* Use Time Profiler to get a better idea as to why RADE steps intermittently take longer to execute.
* g_voice_keyer_tx should use acquire/release.
* Revert "Use Time Profiler to get a better idea as to why RADE steps intermittently take longer to execute."
This reverts commit 711f83be0c.
* Only grab TX status once through the GUI timer.
* Only get sync once per timer run.
* Remove use of wxThread from TxRxThread.
* Use relaxed for retrieving sync status.
* Test: disable Mic In plot.
* Try using relaxed memory ordering.
* Revert "Use relaxed for retrieving sync status."
This reverts commit 364bc62e8c.
* Revert "Try using relaxed memory ordering."
This reverts commit bac5a8a799.
* One more attempt at using Speex resampler.
* Add optimizations for PlotScalar in case it's impacting test runs.
* Reenable lower quality level for plots.
* Try quality level 6.
* Actually fix spurious playback complete log messages.
* Back to quality level 10.
* macOS: Begin wait from end of work.
* Try DISPATCH_TIME_FOREVER.
* Revert "Try DISPATCH_TIME_FOREVER."
This reverts commit a913e8573e.
* Revert "macOS: Begin wait from end of work."
This reverts commit 7c719a3e3c.
* Add crazy hack to inhibit the UI thread while the pipeline is executing.
* Try checking pipeline spinlock every time we have to redraw something.
* Try actually sleeping instead of yielding.
* Revert crazy hack.
* Use separate RX thread instead of ThreadedTimer.
* Begin splitting GUI timer work into separate timers.
* Only update sync and TX state on the timers that need it.
* Defer item updates until highlights are updated.
* Delete accidentally added files.
* Try smaller block sizes.
* Try bigger block size for comparison.
* Re-disable real-time threading.
* Preallocate what we need to output RX/TX features.
* No need to duplicate bitmap to draw onto graphics context. (Reduces number of mmap() calls req'd on macOS.)
* Reenable real time threading.
* Force 50ms time quantum regardless of buffer size.
* Update reporting timers to attempt to guarantee that only one is active at a time.
* Add safety offset to BlackHole virtual audio device.
* WIP: Reduce CPU usage in PlotWaterfall.
* Fix compiler errors and rendering bugs.
* Fix compile error for real this time.
* Don't update FreeDV Reporter window if it's not actually visible.
* Back to 60ms time quantum.
* Back to 50ms.
* Slightly adjust how IsShownOnScreen() suppresses updates.
* Just use an array instead of map for PlotScalar.
* Prevent propagation of changes to FreeDV Reporter window unless something actually changed.
* Tweak Speex resampler quality again.
* Resample level 7.
* Don't need to recreate ThreadedTimer thread every time we need to restart.
* Try not running xctrace to see if we're close to fixing the issues.
* Wait a bit more time between loop iterations when playing UT recordings.
* Revert "Try not running xctrace to see if we're close to fixing the issues."
This reverts commit decff7a5b2.
* Add Time Profiler to xctrace files.
* Make all FreeDV Reporter rows invisible when window is not visible.
* Make FreeDV Reporter object synchronous.
* Add support for queuing on parent object thread instead of own.
* Fix Linux segfault.
* Use macOS Dispatch for ThreadedObject.
* Try disabling threading in TapStep.
* Reenable threading for TapStep.
* More quality level tweaking.
* Re-disable separate threading.
* Only allocate memory for feature storage if necessary.
* Use GCD for TapStep.
* Fix compiler error on Linux.
* Tweak maximum sizes of FIFOs based on recorded max usage during ctests.
* Additional adjustments to FIFO sizes.
* More tweaks of FIFO sizes for Linux.
* Disable workflow telemtry for macOS runs.
* Fix syntax error.
* Revert "Use GCD for TapStep."
This reverts commit e1522a7ab3.
* Fix memory violations when using PlotScalar.
* Fix rendering bugs from previous optimization.
* Try only returning numInputSamples at a time from vocoders.
* Revert src/pipeline to last passed build.
* Quality level 8 works better locally.
* Try 40ms blocks on macOS.
* Reduce the number of context switches while handling FreeDV Reporter traffic.
* Try reducing FIFO sizes again.
* Try reverting PyTorch upgrade.
* Didn't fully revert PyTorch changes.
* SoX is ignoring errors from Core Audio, use buffer sizes known to work.
* SoX divides by 8 to produce frame size sent to CoreAudio.
* Reset resampler back to last known working level.
* Update Linux/macOS audio code to match Windows implementation more closely.
* Try 40ms blocks again.
* Add middle click reset support for speaker/mic level.
* Revert "Try 40ms blocks again."
This reverts commit 3ca16e0335.
* Have FreeDV itself load test.wav due to performance limitations in GH environment.
* GitHub Actions: Disable iCloud (!)
* Need to set config value and not the slider (middle-click).
* Disable xctrace collection.
* Disable mic/speaker level slider unless modem is active.
* Return to libsamplerate for ResampleStep.
* MacAudioDevice cleanup.
* Remove unneeded warning message.
* Need memory_order_acquire for legacy sync state.
* Try RADE main branch again.
* Debugging: see if anything else is running that shouldn't be.
* GitHub: disable Spotlight too.
* Fix typo in README.
* Reenable macOS runner debugging.
* Include mimalloc for a bit extra boost.
* Disable mimalloc ctests.
* Disable macOS debugging again.
* mimalloc wasn't actually being used on macOS.
* mimalloc: decrease purge interval.
* Fix hidden memory allocation during TX output handling.
* Fix additional hidden memory allocations.
* Unit test: make sure rade_loss shows sync state.
* More hidden memory allocation removals.
* Further reduce duplicate memory allocations.
* Fix voice keyer bug reported by @barjac.
* More cleanup of unneeded allocations.
* Fix mini versions of scalar plots (discovered during testing).
* Remove some wxAsyncCallEventFunctor instances from gprof profile.
* Fix compiler error.
* Additional refactoring and memory allocation reduction.
* Extend purge delay a bit just in case.
* Allow GitHub Actions to re-execute test in case of an intermittent failure.
* Fix typo in rade_reporting test.
* Minor reduction in allocations during FreeDV Reporter RX handling.
* Use std::atomic for PlaybackStep.
* Revert "Use std::atomic for PlaybackStep."
This reverts commit 0ee65a38eb.
* Return nullptr to PlaybackStep if not actively playing.
* PlaybackStep: wait for main thread to finish stopping TX instead of previous approach.
* Fix rendering issue going between TX and RX.
* Fix issue where VK monitor plays previously TX audio prior to current VK cycle.
* Fix segfault in Hamlib on pressing Stop.
* Add missed destroying check while setting PTT.
* Additional cleanup in rig_control due to previous commits.
* Reenable timeouts once connected to the radio.
* 100ms might be a bit better.
* Request current frequency/mode every second (instead of every 5 seconds).
* Remove pre-PTT interrogation of frequency/mode.
* Increase Hamlib timeout to 500ms per user testing.
* Add PR #893 to changelog.
* Update comment.
* Fix utf8_str compiler error reported by users when using wxWidgets 3.0.
* Bring back RIGCAPS_NOT_CONST check to keep things compiling on distros still on Hamlib 4.5.
* Avoid crash on stop if hamlib is somehow not able to initialize the radio.
* Need to use PTT type of RIGMICDATA in order for 'CAT via Data port' option to actually work.
* Re-attempt Hamlib connection without timeouts if failed.
* Add Hamlib error message to log.
* Remove timeouts.
* Only set ptt_pathname if using RTS or DTR.
* Various Hamlib fixes adapted from WSJT-X.
* Warning cleanup.
* Update changelog.
* Reset PTT type back to RIG to avoid issues when switching between RTS/DTR and CAT.
* Add support for CAT PTT using the Data port (vs. Mic).
* Update user manual.
* Initial warning cleanup.
* Fix issue causing audio to not work on certain Macs.
* Fix compiler error.
* Fix remaining MacAudioDevice warnings.
* Fix more warnings.
* Fix Hamlib compiler failure due to changes in 4.6.
* Fix websocketpp related warnings on Linux.
* Fix issue causing waterfall rendering issues.
* Fix additional warnings when compiling on Linux.
* Create FIFOs with correct sizes to reduce EOO time.
* Try using configured fifo size for all FIFOs.
* Use correct variable names when definining FIFO sizes.
* Update wxWidgets to 3.2.7 to see if that fixes the build failure.
* Use Ubuntu 24.04 for Windows build to match Linux.
* Patch libsamplerate to avoid GH action failure.
* Need to remove 3.1 from samplerate-cmake.patch
* Fix issue causing cmake to hang if being rerun.
* Temporarily use wxWidgets master as latest Xcode can't build 3.2.7.
* Add support for rig control during RADE EOO ctests.
* Try adding a bit of time to see if it'll decode.
* Fix GH action failure.
* Fix Windows build failure.
* Use same delay code as other existing similar logic.
* Add 20ms delay in mock rigctld to better match behavior with actual hardware.
* Fix Windows build issue for real.
* Fix samplerate patch issue.
* Include wxWidgets manifest code since 3.3 will soon require it.
* Use 3.2 branch as we can build on macOS now in that branch.
* Add IAudioDevice function to allow retrieval of device latency.
* Try shrinking the number of samples FreeDVInterface returns for RADE.
* Add missed get() call in PortAudio logic.
* We really shouldn't need to add txIn latency.
* We need to see the logs from when TX happens during ctest.
* Explicitly disable power savings for audio (macOS).
* Allow partial reads from TX output FIFO.
* First pass at calculating latency for WASAPI.
* Try IO frame size of 1024 to improve pass rate of GH Actions.
* Initial implementation of RADE reporting test on Windows.
* Remove unneeded flag from previously added script.
* Fix various issues with PS script.
* Revert "Try IO frame size of 1024 to improve pass rate of GH Actions."
This reverts commit 1161d9505d.
* Use FDV output, not mock rigctl output, for comparison.
* Use GetStreamLatency() instead.
* Add logging to help determine why WASAPI latency is incorrect.
* Need GetDevicePeriod as well for fully accurate latency measurements.
* Buffer size is the minimum bound on latency. Or at least it seems like it would be, anyway.
* Guarantee that we have universal macOS binary even if tests fail.
* Also take into account PTT response time (i.e. for SDRs).
* Only need to add half of the rig response time for good results.
* Forgot implementation of getRigResponseTimeMicroseconds() for OmniRig.
* Prevent negative zero SNRs from appearing in GUI.
* Try smallest buffer size possible for macOS audio.
* Fix macOS compiler error.
* (Windows) Use event based triggering to provide audio to/from FreeDV.
* Divide by number of channels to get actual latency on macOS.
* Increase minimum frame size to 128 on macOS.
* Oops, types need to be the same.
* Fix deadlock in Windows audio from previous commits.
* Try 256 buffer size on macOS.
* Use minimum of 40ms latency on macOS and Windows.
* No need for the samplerate patch anymore.
* Fix comments.
* Save Hamlib rig names on startup as they're able to change out from under us.
* Bump up Hamlib to 4.6.2.
* Add PR #834 to changelog.
* Capture rig names after sorting the rig list. This ensures that the rig names are in the same order as the main list.
* Append -D to USB/LSB if radio is using digital variant.
* Begin cleanup of logging.
* Fix Windows build failure.
* Bump up minimum macOS version to 10.13 to make compiler happy about fmemopen().
* Switch printf/fprintf to log_* calls.
* Remove spurious newlines from log messages.
* Remove g_verbose from codebase.
* Ensure Hamlib logs via ulog.
* Convert cerr/cout to ulog.
* Fix unit test and Linux compiler errors.
* Strip newlines from end of hamlib log messages.
* It would help if we actually printed the non-newline version of the log message.
* Actually fix Windows compiler errors.
* Replace additional printfs with log_* after merge from main.
* Add locking around logging to make sure we don't lose any.
* Try disabling color to get Windows tests working again.
* Use regular wine instead of wine-staging.
* Revert "Use regular wine instead of wine-staging."
This reverts commit 88bf4ef7c2.
* Add missed changelog entries.
* Poll for xvfb to come up.
* Try framebuffer dir instead.
* Fix typo.
* Try 24 bit color.
* Try xvfb-run instead.
* Fix xvfb-run command.
* Try the screen arguments again.
* Try wine-devel instead as it might be more stable.
* Update cmake-windows.yml
* Lock log mutex before running RADE RX.
This is to avoid test output loss on Windows.
* Log to stderr and not stdout.
* Update RADEReceiveStep.cpp
Mooneer Salem