* Fix compiler errors when using wxWidgets 3.0.
* Add GH action to make sure we can compile on Ubuntu 22.04.
* Fix package name.
* Add PR #914 to changelog.
* Ensure only one build per branch happens at a time.
* Return to 20ms block sizes on macOS to improve test reliability.
* Use Windows 2022 in test environment.
Don't want to be fighting Windows problems too.
* Don't want to be fighting gfortran either.
* Try caching Homebrew package install to decrease compile/test time for macOS.
* See if we can make RADE reporting a bit more reliable in the GH environment.
* Remove 800XA, 700C, 2020 and 2020B from UI,
* Remove additional 700C references in UI.
* Remove 2020/AVX detection logic from codebase.
* Remove LPCNet from build scripts.
* Add PR #889 to changelog.
* Forgot to remove LPCNet from Windows installer generation.
* Generate Release build for GH workflows.
* Disable PSK Reporter reporting during test execution as invalid callsigns are used.
* Build type was being overwritten.
* Missed mutex removal.
* Temporarily use Instruments to trace macOS CI execution.
* Minor update.
* Use 2 minute window in xctrace to actually capture wanted events.
* Disable xctrace execution but keep in tests just in case.
* Hide main window during tests to prevent GUI from interfering.
* Experiment: set infifo2 max length to 30 seconds
* Oops, forgot to remove division from previous commit.
* Deallocation of PulseAudio stream should occur while mainloop is locked.
* Revert "Hide main window during tests to prevent GUI from interfering."
This reverts commit 69689bb927.
* Based on online code snippets nullptr for neg is fine.
* Clear PYTHONHOME if set on the user's system (Windows/macOS only).
* Bring back locking in TxRxThread just in case.
* Remove unneeded backslash.
* Revert "Bring back locking in TxRxThread just in case."
This reverts commit fc6a9f8797.
* Manually back out the changes instead of using git checkout.
* Use shared_ptr for LinkStep.
* Try removing the TX mode change mutex again.
* Try moving actual codec activity out of RT context.
* Fix compiler error.
* Fix issue preventing legacy modes from transmitting.
* Another attempt at preventing RX dropouts.
* Try putting mode TX into separate threads again.
* Only limit output samples if input samples were provided.
* Put codec RX back into RT context.
* Put TX on RT context.
* Remove unused code.
* Deallocation should occur only in the destructor.
* Fix Windows spectrum plot formatting issues.
* Prevent buffer overflow during TX/RX processing.
* Bring FRAME_DURATION back down to 10ms.
* We want to feed samples into the RADE/FreeDV TX/RX FIFOs regardless of whether there's room in the output.
* ParallelStep should only feed FRAME_DURATION ms worth of samples at a time.
* Sleep fallback should track FRAME_DURATION.
* Don't execute the parallel steps if there isn't enough room in the output FIFO.
* We really can only inject a portion of EOO samples at a time.
* Queue EOO as a single unit to ensure it gets transmitted as a unit.
* Allow ParallelStep to provide up to 4x the number of input samples as output.
* Back to processing 20ms frames.
* Run GH Linux tests using asan enabled.
* Suppress Python related memory leaks and Hamlib related invalid memory accesses.
* Forgot suppressions= in test execution.
* Add more leak suppressions based on GH output.
* Resolve memory leaks.
* Fix broken RadeTextTest.
* Additional suppressions from GH.
* Go back to processing TxNumSpeechSamples every TX cycle.
* Revert "Go back to processing TxNumSpeechSamples every TX cycle."
This reverts commit abe816d00b.
* Fix 1600 mode dropouts.
* Make TX single-threaded again.
* Revert back to last working pipeline logic (for fullduplex_* anyway).
* Revert most EOO behavior.
* Run AddressSanitizer tests separately as they interfere with real time audio.
* Need to start Xvfb etc. before asan tests.
* Only a subset of tests need to run with asan enabled.
* Fix issue causing PTT input not to work.
* Maybe we don't need to restart servers after all.
* Try using rtkit to ask for high priority instead of RT.
* Clear FIFOs a different way.
* Windows: determine minimum number of audio channels supported.
* Adjust constants based on Instruments analysis.
* Update comments.
* Try reading only FRAME_DURATION at a time during TX.
* Speex step doesn't need to be locked.
* Use shared pointers instead of locking during EqualizerStep.
* Move file read out of the RT context.
* Remove file I/O from RT context for RecordStep too.
* Try requesting 10ms blocks from Windows.
* Allow all GH tests to run.
* Revert back to 20ms frames.
* Minor tweak to Easy Setup window formatting.
* Revert "Revert back to 20ms frames."
This reverts commit b67313cdef.
* Update freedv-ctest-fullduplex.conf.tmpl
Disable multiple RX for testing.
* Turn off multiple RX for reporting tests as well.
* Force single threaded if only one step is available.
* Revert changes to freedv-ctest-fullduplex.conf.tmpl.
* Revert changes to freedv-ctest-reporting.conf.tmpl.
* Need to wake up all threads whenever we get a block of audio.
* Fix compiler errors.
* Revert previous changes as they didn't help.
* Refactor ParallelStep to remove usage of locks.
* Fix compiler errors and warnings.
* Fix issue preventing EOO from being sent.
* Another attempt at fixing the test failures.
* Use semaphores to wake up ParallelStep threads on receipt of new audio data.
* Fix compiler errors.
* Forgot to wake up helper threads.
* Helper threads should wait until ended or until there's data.
* Fix compiler error.
* Increase fifo sizes for FreeDV TX and RX steps.
* macOS: add protection in case semaphore wasn't created.
* Prevent waterfall from clearing itself when RX mode changes.
* Add logic to read in any data that may have come in during processing.
* GitHub Actions: run all Windows tests even if one or more fail.
* Revert "Add logic to read in any data that may have come in during processing."
This reverts commit 11ce99bb6a.
* Meter out only a little bit of data at a time.
* Revert "Meter out only a little bit of data at a time."
This reverts commit 35e81d6ce5.
* Use 20ms blocks instead of 10ms.
* Revert "Use 20ms blocks instead of 10ms."
This reverts commit 1ec6fb308a.
* Update FRAME_DURATION instead.
* Only process entire TX blocks at a time.
* Set sRGB color space for all open windows.
* Change version tag to rc to reflect release candidate status.
* Revert waveform FIFO changes from previous PR.
* libsamplerate needs to be built with optimizations on macOS and Windows.
* Fix Windows build failure.
* Update LLVM MinGW in Windows CI build to match version used for packaging.
* Test: use RADE main to see if Python GC actually matters.
* Create FIFOs with correct sizes to reduce EOO time.
* Try using configured fifo size for all FIFOs.
* Use correct variable names when definining FIFO sizes.
* Update wxWidgets to 3.2.7 to see if that fixes the build failure.
* Use Ubuntu 24.04 for Windows build to match Linux.
* Patch libsamplerate to avoid GH action failure.
* Need to remove 3.1 from samplerate-cmake.patch
* Fix issue causing cmake to hang if being rerun.
* Temporarily use wxWidgets master as latest Xcode can't build 3.2.7.
* Add support for rig control during RADE EOO ctests.
* Try adding a bit of time to see if it'll decode.
* Fix GH action failure.
* Fix Windows build failure.
* Use same delay code as other existing similar logic.
* Add 20ms delay in mock rigctld to better match behavior with actual hardware.
* Fix Windows build issue for real.
* Fix samplerate patch issue.
* Include wxWidgets manifest code since 3.3 will soon require it.
* Use 3.2 branch as we can build on macOS now in that branch.
* Add IAudioDevice function to allow retrieval of device latency.
* Try shrinking the number of samples FreeDVInterface returns for RADE.
* Add missed get() call in PortAudio logic.
* We really shouldn't need to add txIn latency.
* We need to see the logs from when TX happens during ctest.
* Explicitly disable power savings for audio (macOS).
* Allow partial reads from TX output FIFO.
* First pass at calculating latency for WASAPI.
* Try IO frame size of 1024 to improve pass rate of GH Actions.
* Initial implementation of RADE reporting test on Windows.
* Remove unneeded flag from previously added script.
* Fix various issues with PS script.
* Revert "Try IO frame size of 1024 to improve pass rate of GH Actions."
This reverts commit 1161d9505d.
* Use FDV output, not mock rigctl output, for comparison.
* Use GetStreamLatency() instead.
* Add logging to help determine why WASAPI latency is incorrect.
* Need GetDevicePeriod as well for fully accurate latency measurements.
* Buffer size is the minimum bound on latency. Or at least it seems like it would be, anyway.
* Guarantee that we have universal macOS binary even if tests fail.
* Also take into account PTT response time (i.e. for SDRs).
* Only need to add half of the rig response time for good results.
* Forgot implementation of getRigResponseTimeMicroseconds() for OmniRig.
* Prevent negative zero SNRs from appearing in GUI.
* Try smallest buffer size possible for macOS audio.
* Fix macOS compiler error.
* (Windows) Use event based triggering to provide audio to/from FreeDV.
* Divide by number of channels to get actual latency on macOS.
* Increase minimum frame size to 128 on macOS.
* Oops, types need to be the same.
* Fix deadlock in Windows audio from previous commits.
* Try 256 buffer size on macOS.
* Use minimum of 40ms latency on macOS and Windows.
* No need for the samplerate patch anymore.
* Fix comments.
* Update build scripts to use optimal number of parallel builds.
* Update Windows GH action similarly to other build scripts.
* Add PR #842 to changelog.
* Need -j6 for Windows for some reason.
* Increase Windows test timeouts.
* -j doesn't actually limit the number of parallel builds.
* Begin cleanup of logging.
* Fix Windows build failure.
* Bump up minimum macOS version to 10.13 to make compiler happy about fmemopen().
* Switch printf/fprintf to log_* calls.
* Remove spurious newlines from log messages.
* Remove g_verbose from codebase.
* Ensure Hamlib logs via ulog.
* Convert cerr/cout to ulog.
* Fix unit test and Linux compiler errors.
* Strip newlines from end of hamlib log messages.
* It would help if we actually printed the non-newline version of the log message.
* Actually fix Windows compiler errors.
* Replace additional printfs with log_* after merge from main.
* Add locking around logging to make sure we don't lose any.
* Try disabling color to get Windows tests working again.
* Use regular wine instead of wine-staging.
* Revert "Use regular wine instead of wine-staging."
This reverts commit 88bf4ef7c2.
* Add missed changelog entries.
* Poll for xvfb to come up.
* Try framebuffer dir instead.
* Fix typo.
* Try 24 bit color.
* Try xvfb-run instead.
* Fix xvfb-run command.
* Try the screen arguments again.
* Try wine-devel instead as it might be more stable.
* Update cmake-windows.yml
* Lock log mutex before running RADE RX.
This is to avoid test output loss on Windows.
* Log to stderr and not stdout.
* Update RADEReceiveStep.cpp
* Add logic for automatically running RX/TX tests.
* Add GH action to load loopback audio driver.
* Add ctest configuration file.
* Try loading modules after installing packages.
* Add additional required packages.
* Add automated test script.
* Temporarily disable GH action changes.
* Have RX take 60 seconds as well.
* Ubuntu upgrade broke /bin/sh.
* Fix issue preventing no zero message from printing.
* Print sync status once per second and validate no resyncs.
* Fix spelling error.
* Switch to RADE main.
* Another attempt at enabling aloop in the GH action.
* Use _ instead of - for module name.
* Use pacmd to create virtual sound devices instead.
* Check sync state every 100ms instead of every 1s.
* Fix issue preventing sync changes from making it to the log.
* Add full duplex test.
* Add full duplex tests to CMakeLists.
* Generate sine wave for TX.
* Update GH action to allow new ctests to run.
* Add debugging for UT.
* pipewire-pulse is needed to actually use PipeWire.
* Install suggested packages to get additional required commands.
* Can't use --install-suggests, so explicitly mention packages.
* Enable pipewire service.
* Fix call to helper Python script.
* Show status of pipewire prior to running tests.
* Remove status display from GH action.
* Use module-loopback to simulate TX plugged into RX.
* Try explicitly starting pipewire.
* Use strict 20ms cadence for TX/RX thread instead of relying on the audio subsystem.
* Need to install wireplumber as well.
* Update regular expression in ctest as sync change message isn't printed unless there's a problem.
* Add RADE to ctests.
* RADE ctest pass wasn't actually a pass.
* Need to explicitly check for LINUX for PulseAudio based ctests.
* Reenable PortAudio build.
* Invert test criteria.
* Show pipewire status just before thye test run.
* List sink info prior to each test.
* Make sure virtual devices aren't suspended.
* Need to have the suspension disable code in another file.
* Actually, installing pulseaudio isn't a good idea.
* Need a window manager for things to refresh properly.
* Display wireplumber info after FDV start.
* Add additional sleep to guarantee that FreeDV is listening when wireplumber status is printed.
* Add pw-top for additional info.
* dbus needs to be running for pipewire to work.
* Need to wait a bit for Xvfb to become available.
* Get additional pipewire logs prior to UT run.
* Install/run rtkit too.
* Attempt to get pipewire logs after test execution.
* Looks like we still need to start pipewire manually.
* Further increase pipewire debugging.
* Too much debugging output before.
* Upgrade packages first before installing new ones.
* We weren't actually running 24.04 on GH.
* Adjust packages due to using 24.04.
* Suppress spellcheck issue.
* Disable pipewire debugging.
* Test changes to PulseAudioDevice to improve dropouts.
* Update tests to reflect 1 resync per 120s proposed threshold.
* Disable additional debugging output.
* Allow override of test audio devices from the command line.
* Enable ctests on macOS.
* getSync() isn't thread safe, causing false UT failures.
* Install virtual audio devices in CI environment for macOS.
* Use script to build drivers instead.
* Oops, forgot to remove some code first.
* Adjust permissions of script.
* Make tests work on Linux again with loopback devices.
* Attempt change to make virtual audio devices actually build.
* Try building on x86 macOS.
* Fix quote escape issues.
* More quote escape issues.
* Forgot missed folder change.
* Enable mirrored virtual audio devices.
* Fix incorrect device names in ctest execution.
* Need to append '2ch' to the other device names too.
* Clear sync when transmitting.
* Grant microphone access to FreeDV.
* Need to back out one of the changes due to voice keyer problems.
* Attempt to fix CI failures.
* Take screenshot of macOS CI environment for debugging.
* Let's try running the script separately to get a screenshot.
* Screenshot was in the wrong place.
* Need to grant access to provisioner for microphone.
* Alternate way of granting permissions.
* Oops, remove call to tccutil.
* Per PLT meeting, we shouldn't drop sync at all.
* Shorten test time to 60s.
* More tweaks to make sure that the devices are correct on Linux.
* Disable screen capture.
* Additional fixes to resolve script problems on macOS.
* I don't think previous PulseAudio changes made anything better.
* Improve dropouts when using PulseAudio/pipewire.
* Revert "Improve dropouts when using PulseAudio/pipewire."
This reverts commit f16c27f4d3.
* Have stream write callback get audio data from higher level code.
* Add PowerShell script for Windows testing.
* Move ctest files into a separate location for organization purposes.
* Add parameters for PowerShell test script.
* Add help text for the script.
* Update conf file path due to previous commits.
* Fix syntax errors in script.
* Experiment: Test Windows installer on GH action.
* Try actually running full duplex test inside Windows.
* Add 5 seconds to allow Xvfb to fully come up.
* Update other actions to use latest checkout.
* Need VS command prompt.
* Add additional debugging.
* Maybe we need to throw an exception to make the GH action fail.
* List devices another way.
* Add yet more debugging.
* Fix audio devices.
* Try with 700D to at least make sure we're on the right track.
* Fix GH action.
* Fix syntax errors.
* Try installing VAC instead as FreeDV is crashing with Scream.
* Fix syntax error.
* Try different hardware ID.
* Ignore error code that actually means success.
* Oops, fix syntax error.
* Try earlier version of VAC.
* Fix archive commands.
* Fix path.
* Probably need to start AudioEndpointBuilder too.
* Stop services first.
* Print out any errors that might be getting thrown.
* Revert "Print out any errors that might be getting thrown."
This reverts commit 15e3908c80.
* Disable test GH action for Windows and investigate failure later.
* Reenable Windows testing with new way of debugging.
* Add logging based on clues from Windows event log.
* Revert "Add logging based on clues from Windows event log."
This reverts commit de4f11362e.
* Use procdump to get a crash dump.
* Full dump seems to take a while.
* Run procdump in the background.
* Log audio errors.
* Print device name in error message.
* Make sure message box doesn't display.
* Enable additional PortAudio debugging.
* Add yet more logging.
* Add additional Registry key to ensure FreeDV has microphone permissions.
* Need to add Registry key.
* Add more keys to try to force microphone permission.
* Clean up debugging, add tests for RADE/700E/1600.
* More cleanup.
* Include very basic Python install in the FreeDV Windows installer.
* Bump version to 2.0.0 devel.
* Adjust pth file to allow pip to work.
* Create post-install script. Not tied into the installer yet.
* Install needed packages during setup.
* Fix issue preventing uninstall commands from being properly added to the installer.
* Add RADE binaries to installer for initial tests.
* Suppress RADAE/RADE in code spelling check.
* Fix additional compiler errors.
* Fix GitHub actions on Linux and macOS.
* Print API version later on startup so it'll actually show up in the Windows console.
* Enforce minimum 16 kHz sample rate for voice keyer files.
* Disallow sample rates lower than 16000 in audio config.
* Initial support for RX using librade.
* Adjust dependencies in CMake infrastructure to make sure RADE/Opus build before FreeDV code.
* Add GUI for RADE.
* Add forgotten files.
* Add initialize/finalize calls for RADE.
* Add progress text to post-install script.
* Adjust paths based on recent RADE commits.
* Add basic support for RADE TX.
* Output EOO on end of TX.
* Fix error preventing Windows installer from being created without 2020 mode.
* Change working directory to folder containing freedv.exe.
* Remove quotes from messages in post-setup script.
* Fix compiler errors.
* Fix assertion failure in PlaybackStep.
* Fix assertion failure in FreeDVInterface.
* Suppress warnings during post-install.
* Get missed bugfixes from previous PR.
* Test changes to get GH actions working again for Windows.
* Forgot to install WINE in GH action.
* Try win64 instead of win32 for WINE.
* wine32 and not wine64
* Try different way of installing wine.
* Remove packages that don't exist.
* Oops, actually installed Python 3.12.7.
* Use normal Python installer instead of wenv.
* Need to make sure wine runs in console-only.
* Use Wine from Ubuntu.
* Install wine32 too.
* Ignore return value.
* Use xvfb since trying to bypass doesn't work for winecfg.
* s/xvfb/xvfb-run/
* Separate WINE install from Python.
* More tweaks to the GH workflow.
* wine64 instead of wine
* Use WINEARCH when creating env.
* test changes
* Start xvfb separately.
* xvfb -> Xvfb
* Add debugging
* Forgot :
* Make WINE think it's Windows 10.
* Back to using wine-staging.
* Reenable xvfb.
* Fix cmake invocation.
* Integrate BuildOpus changes from RADE.
* Ensure Opus is built for minimum supported FreeDV version.
* Warning cleanup.
* Ensure RADE is actually built as a universal binary.
* Include basic Python into the .app file.
* macOS version now builds. Still need to figure out how to get modules installed.
* Resolve problems preventing proper execution of the macOS binary.
* torchvision isn't necessary.
* Fix reporting so that we report RADE instead of 'unk'.
* Expire devel versions of FreeDV after six months.
* Attenuate RADE TX by 4dB to avoid needing to adjust TX Attenuation dial just for that mode.
* Disable 2020/2020B on all platforms.
* Stop building 32 bit Windows builds.
* Move RADE mode to the top of the mode list.
* Tweak preprocess function for RADE.
* Update Windows Python to 3.12.7.
* Re-disable ARM Windows builds while we figure out how to build it.
* Build Wine in signing environment.
* Update wxWidgets to 3.2.6.
* Workaround time display issue in FreeDV Reporter on macOS.
* Limit number of numpy/OpenBLAS threads due to known issues with their interaction with Python/C++ threading.
* Add additional guarding around Codec2 FIFO calls.
* Split off DMG creation into separate target to save time during development.
* Use dr-reset for initial release.
Mooneer Salem