Adding some additional idle frames after a DMR Abort

DMRTX.cpp

@@ -54,6 +54,7 @@ const uint8_t BIT_MASK_TABLE[] = {0x80U, 0x40U, 0x20U, 0x10U, 0x08U, 0x04U, 0x02
 #define READ_BIT1(p,i)    (p[(i)>>3] & BIT_MASK_TABLE[(i)&7])
 
 const uint32_t STARTUP_COUNT = 20U;
+const uint32_t ABORT_COUNT = 8U;
 
 CDMRTX::CDMRTX() :
 m_fifo(),
@@ -69,6 +70,7 @@ m_poBuffer(),
 m_poLen(0U),
 m_poPtr(0U),
 m_frameCount(0U),
+m_abortCount(0U),
 m_abort()
 {
   ::memset(m_modState, 0x00U, 16U * sizeof(q15_t));
@@ -210,10 +212,12 @@ uint8_t CDMRTX::writeAbort(const uint8_t* data, uint8_t length)
 
   switch (data[0U]) {
     case 1U:
+      m_abortCount = 0U;
       m_abort[0U] = true;
       return 0U;
 
     case 2U:
+      m_abortCount = 0U;
       m_abort[1U] = true;
       return 0U;
 
@@ -227,6 +231,7 @@ void CDMRTX::setStart(bool start)
   m_state = start ? DMRTXSTATE_SLOT1 : DMRTXSTATE_IDLE;
 
   m_frameCount = 0U;
+  m_abortCount = 0U;
 
   m_abort[0U] = false;
   m_abort[1U] = false;
@@ -282,7 +287,7 @@ uint8_t CDMRTX::getSpace2() const
 
 void CDMRTX::createData(uint8_t slotIndex)
 {
-  if (m_fifo[slotIndex].getData() > 0U && m_frameCount >= STARTUP_COUNT) {
+  if (m_fifo[slotIndex].getData() > 0U && m_frameCount >= STARTUP_COUNT && m_abortCount >= ABORT_COUNT) {
     for (unsigned int i = 0U; i < DMR_FRAME_LENGTH_BYTES; i++) {
       m_poBuffer[i]   = m_fifo[slotIndex].get();
       m_markBuffer[i] = MARK_NONE;
@@ -335,6 +340,7 @@ void CDMRTX::createCal()
 void CDMRTX::createCACH(uint8_t txSlotIndex, uint8_t rxSlotIndex)
 {
   m_frameCount++;
+  m_abortCount++;
 
   if (m_cachPtr >= 12U)
     m_cachPtr = 0U;

DMRTX.h

@@ -72,6 +72,7 @@ private:
   uint16_t                         m_poLen;
   uint16_t                         m_poPtr;
   uint32_t                         m_frameCount;
+  uint32_t                         m_abortCount;
   bool                             m_abort[2U];
 
   void createData(uint8_t slotIndex);