Unsignedio
/
RNode_Firmware
mirror of https://github.com/markqvist/RNode_Firmware.git
1
0
Fork 0
Code Issues Releases Wiki Activity

Added sleep and wake support on T114

pull/93/merge
Mark Qvist 2025-01-15 11:01:26 +01:00
parent 2119d381b3
commit 3073677b82
1 changed files with 30 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

48
RNode_Firmware.ino
View File

@ -105,7 +105,7 @@ void setup() {
led_init();
#endif
#if BOARD_MODEL != BOARD_RAK4631 && BOARD_MODEL != BOARD_HELTEC_T114 && BOARD_MODEL != BOARD_RNODE_NG_22 && BOARD_MODEL != BOARD_TBEAM_S_V1
#if BOARD_MODEL != BOARD_RAK4631 && BOARD_MODEL != BOARD_HELTEC_T114 && BOARD_MODEL != BOARD_T3S3 && BOARD_MODEL != BOARD_TBEAM_S_V1
// Some boards need to wait until the hardware UART is set up before booting
// the full firmware. In the case of the RAK4631 and Heltec T114, the line below will wait
// until a serial connection is actually established with a master. Thus, it
@ -161,7 +161,7 @@ void setup() {
#if MCU_VARIANT == MCU_ESP32 || MCU_VARIANT == MCU_NRF52
init_channel_stats();
#if BOARD_MODEL == BOARD_RNODE_NG_22
#if BOARD_MODEL == BOARD_T3S3
#if MODEM == SX1280
delay(300);
LoRa->reset();
@ -246,7 +246,7 @@ void setup() {
if (ia_conf == 0x00) { avoid_interference = true; }
else { avoid_interference = false; }
#elif MCU_VARIANT == MCU_NRF52
uint8_t ia_conf == eeprom_read(eeprom_addr(ADDR_CONF_DIA));
uint8_t ia_conf = eeprom_read(eeprom_addr(ADDR_CONF_DIA));
if (ia_conf == 0x00) { avoid_interference = true; }
else { avoid_interference = false; }
#endif
@ -1592,22 +1592,34 @@ void loop() {
void sleep_now() {
#if HAS_SLEEP == true
#if BOARD_MODEL == BOARD_RNODE_NG_22
display_intensity = 0;
update_display(true);
#if PLATFORM == PLATFORM_ESP32
#if BOARD_MODEL == BOARD_T3S3
display_intensity = 0;
update_display(true);
#endif
#if PIN_DISP_SLEEP >= 0
pinMode(PIN_DISP_SLEEP, OUTPUT);
digitalWrite(PIN_DISP_SLEEP, DISP_SLEEP_LEVEL);
#endif
#if HAS_BLUETOOTH
if (bt_state == BT_STATE_CONNECTED) {
bt_stop();
delay(100);
}
#endif
esp_sleep_enable_ext0_wakeup(PIN_WAKEUP, WAKEUP_LEVEL);
esp_deep_sleep_start();
#elif PLATFORM == PLATFORM_NRF52
#if BOARD_MODEL == BOARD_HELTEC_T114
npset(0,0,0);
digitalWrite(PIN_T114_VEXT_EN, LOW);
digitalWrite(PIN_T114_TFT_BLGT, HIGH);
digitalWrite(PIN_T114_TFT_EN, HIGH);
#endif
sd_power_gpregret_set(0, 0x6d);
nrf_gpio_cfg_sense_input(pin_btn_usr1, NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
NRF_POWER->SYSTEMOFF = 1;
#endif
#if PIN_DISP_SLEEP >= 0
pinMode(PIN_DISP_SLEEP, OUTPUT);
digitalWrite(PIN_DISP_SLEEP, DISP_SLEEP_LEVEL);
#endif
#if HAS_BLUETOOTH
if (bt_state == BT_STATE_CONNECTED) {
bt_stop();
delay(100);
}
#endif
esp_sleep_enable_ext0_wakeup(PIN_WAKEUP, WAKEUP_LEVEL);
esp_deep_sleep_start();
#endif
}