WolfSSL
/
wolfBoot-examples
mirror of https://github.com/wolfSSL/wolfBoot-examples.git
1
0
Fork 0
Code Issues Releases Wiki Activity

Added note about starting GDB server.

pull/4/head
David Garske 2021-01-27 15:28:12 -08:00 committed by Dimitar Tomov
parent 0b533d218f
commit ab886c973c
1 changed files with 12 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
test-app-STM32F4-measured-boot/README.md
View File

@ -54,6 +54,7 @@ Hardware connections must be made between the TPM2.0 module and the STM32F4 boar
| 3V | +3V | Pin 1 |
| GND | Ground | Pin 6 |
UART1 on the STM32F4 is used by default. The default baud rate is 115200.
The UART Pinout can be found below:
@ -130,26 +131,28 @@ size: 12504
2021-01-27T19:24:08 INFO common.c: Flash written and verified! jolly good!
```
Launch arm-none-eabi-gdb and perform the following steps for debugging
To debug start first start GDB server (see GDB Server section below).
1. Load symbol file for test application. Wolfboot.elf is already loaded thanks to .gdbinit supplied with the project.
1. Launch arm-none-eabi-gdb and perform the following steps for debugging
2. Load symbol file for test application. Wolfboot.elf is already loaded thanks to .gdbinit supplied with the project.
`add-symbol-file image.elf`
2. Set breakpoints at "main", two breakpoints should be created, one for main() in wolfBoot and one for main() in the test app.
3. Set breakpoints at "main", two breakpoints should be created, one for main() in wolfBoot and one for main() in the test app.
`b main`
3. Set breakpoints at "measure_boot", "read_measured_boot"
4. Set breakpoints at "measure_boot", "read_measured_boot"
`b measure_boot`
`b read_measured_boot`
4. Start execution by invoking "continue" to gdb
5. Start execution by invoking "continue" to gdb
`c`
5. Expected output on the connected UART terminal (see UART pinout in `Prerequisites`)
6. Expected output on the connected UART terminal (see UART pinout in `Prerequisites`)
```
App started
@ -160,7 +163,7 @@ This value is the one created by wolfBoot during start of the device. This value
For more information about measured boot contact us at facts@wolfssl.com
## Notes
## GDB Server
The supplied openocd.config is prepared for STM32F407-Discovery revision D that uses newer ST-LINK2 variant.
@ -178,6 +181,8 @@ Start new openocd session using
Start new gdb session as described in `Usage`.
Note: You can also use the ST-Util for GDB server using: `st-util -p 3333`.
Please contact us at support@wolfssl.com for any questions about using this example.
## Copyright notice