Added description of the firmware upgrade procedure.

Updated wolfssl submodule.

docs/firmware_upgrade.md

@@ -0,0 +1,122 @@
+# Firmware upgrade
+
+This section documents the complete firmware upgrade procedure, enabling secure boot
+for an existing embedded application.
+
+The steps to follow to complete a firmware upgrade with wolfBoot are:
+   - Compile the firmware with the correct entry point
+   - Sign the firmware
+   - Transfer the image using a secure connection, and store it to the secondary firmware slot
+   - Trigger the image swap
+   - Reboot to let the bootloader begin the image swap
+
+
+An application can be linked to wolfBoot `bootutil` library, which exports the API to trigger
+the upgrade at the next reboot, and some helper functions to access the flash partition for 
+erase/write through the target specific [HAL](HAL.md).
+
+## Upgrade mode
+
+wolfBoot can be compiled to provide two different types of upgrade:
+   - Overwrite-only mode
+   - Swap mode
+
+### Overwrite-only mode
+
+If wolfBoot is compiled with the `SWAP=0` command line option, no swap partition is required.
+In this case, every time that a firmware upgrade is triggered, there is no way to revert the upgrade.
+
+After the received firmware image is marked as 'pending' from the application, wolfBoot will verify its
+authenticity and integrity, and overwrite the boot partition by storing the new image.
+
+No firmware image rollback option is present in this configuration.
+
+### Swap mode
+
+Using the default configuration, wolfBoot offers the possibility to initiate, confirm or rollback an upgrade.
+
+This mode requires an additional partition (swap) that can be used as a temporary storage. The swap partition
+is also able to track the status of the flash operations, so that in case of power failure it can restart 
+the interrupted upgrade operation.
+
+The application can trigger temporary or permanent upgrades.
+
+
+## Building a new firmware image
+
+Firmware images are position-dependent, and can only boot from the origin of the **boot** partition in the FLASH.
+This design choice means that the chosen firmware is always stored in the **boot** partition, and the bootloader
+is responsible for pre-validating an upgrade image and copy it to the correct address.
+
+All the firmware images must therefore have their entry point set to the address corresponding to the beginning 
+of the **boot** partition, plus an offset of 256 Bytes to account for the firmware header.
+
+Once the firmware is compiled and linked, it must be signed using the `ed25519_sign` tool. The tool produces
+a signed image that can be transferred to the target using a secure connection, using the same key corresponding
+to the public key currently used for verification.
+
+The tool also appends the TLV at the end of the image, containing the signatures and the SHA256 hash of the firmware.
+
+## Embedded application
+
+At any given time, an application or OS running on a wolfBoot system can receive an updated version of itself,
+and store the updated image in the second partition in the FLASH memory.
+
+In order to communicate with the bootloader, the application can be linked with the `bootutil` library, by 
+including the source file [lib/bootutil/bootutil\_misc.c](../lib/bootutil/bootutil_misc.c) and the back-end of
+the [Hardware Abstraction Layer](docs/HAL.md) in use by wolfBoot for the target.
+
+If the running application lacks support for FLASH IAP operations, *bootutil* can also be used to easily access
+the flash for erasing/writing.
+
+### Storing the update image
+
+The application can access the flash area using the following API:
+
+
+#### Flash access
+
+The following functions are declared in `include/flash.h`:    
+
+`int flash_area_open(uint8_t id, const struct flash_area **area)`
+
+Initialize a `flash_area` object associated to the partition associated to identifier
+`id`. 
+
+Possible identifiers are:
+  - `1` for the **boot** partition
+  - `2` for the **upgrade** partition
+  - `3` for the **swap** partition, if present.
+
+This function must be called before using any other `flash_area_*` function.
+Returns 0 on success.
+
+`void flash_area_close(const struct flash_area *area)`
+Stop using a flash area associated to the structure passed as argument.
+
+
+`int flash_area_read(const struct flash_area *, uint32_t off, void *dst,  uint32_t len)`
+`int flash_area_write(const struct flash_area *, uint32_t off, const void *src,  uint32_t len)`
+`int flash_area_erase(const struct flash_area *, uint32_t off, uint32_t len)`
+
+Read/Write/Erase a portion of the flash area, starting at offset `off` relative to the beginning
+of the partition.
+
+#### Triggering an upgrade
+
+The following function is exported by the bootutil library and declared in `include/bootutil.h`:
+
+`int boot_set_pending(int permanent);`
+Trigger a firmware upgrade after the next reboot. If the permanent flag is not active and wolfBoot
+is compiled in "swap" mode, the change will require to be confirmed via `boot_set_confirmed()` after
+a successful boot, otherwise the original image will be rolled back after another reboot.
+
+`int boot_set_confirmed(void);`
+Confirm a previously triggered temporary upgrade. Only available when wolfBoot is compiled in swap mode.
+
+To boot into the image stored in the upgrade partition, it is sufficient to call:
+
+`boot_set_pending(1);`
+
+and reboot the system to initiate the upgrade. 
+

lib/wolfssl

@@ -1 +1 @@
-Subproject commit 84fb23cfabd00a3ba2ae8f53665526c9f3844a48
+Subproject commit 1ffc1108a6f351054548ff4e9a1791d0118aa7fb