From 80dbfffb2650947e0114dfade84e77c6fd519c64 Mon Sep 17 00:00:00 2001 From: John Bland Date: Tue, 31 Jan 2023 12:15:25 -0500 Subject: [PATCH] change to wolfBoot.bin --- docs/Targets.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/Targets.md b/docs/Targets.md index 9155dbe9..ffd71009 100644 --- a/docs/Targets.md +++ b/docs/Targets.md @@ -242,8 +242,8 @@ SECWM2_PSTRT=0x1 SECWM2_PEND=0x0 No page of internal Flash Bank2 set as secur 3. Prepare board with option bytes configuration reported above - `STM32_Programmer_CLI -c port=swd mode=hotplug -ob TZEN=1 DBANK=1` - `STM32_Programmer_CLI -c port=swd mode=hotplug -ob SECWM1_PSTRT=0x0 SECWM1_PEND=0x7F SECWM2_PSTRT=0x1 SECWM2_PEND=0x0` -4. flash wolfBoot.elf to 0x0c000000 - - `STM32_Programmer_CLI -c port=swd -d ./wolfboot.elf 0x0C000000` +4. flash wolfBoot.bin to 0x0c000000 + - `STM32_Programmer_CLI -c port=swd -d ./wolfboot.bin 0x0C000000` 5. flash .\test-app\image_v1_signed.bin to 0x08010000 - `STM32_Programmer_CLI -c port=swd -d ./test-app/image_v1_signed.bin 0x08100000` 6. RED LD9 will be on @@ -272,8 +272,8 @@ A firmware update can be uploaded at address 0x08108000. The example configuration is available in [/config/examples/stm32u5-nonsecure-dualbank.config](/config/examples/stm32u5-nonsecure-dualbank.config). Program each partition using: -1. flash `wolfboot.elf` to 0x08000000: - - `STM32_Programmer_CLI -c port=swd -d ./wolfboot.elf 0x08000000` +1. flash `wolfboot.bin` to 0x08000000: + - `STM32_Programmer_CLI -c port=swd -d ./wolfboot.bin 0x08000000` 2. flash `image_v1_signed.bin` to 0x08008000 - `STM32_Programmer_CLI -c port=swd -d ./test-app/image_v1_signed.bin 0x08008000`