Add wolfBoot support for booting VxWorks 7 SMP 64-bit (and signed ELF
images) on the NXP T2080 (e6500) / Curtiss-Wright VPX3-152.
Key fix: bring up the e6500 cluster L2 cache in the correct order -- set
L2PE (ECC) in its own polled write BEFORE enabling L2E, with L2FI|L2LFC --
matching CW U-Boot (SDK2.0). The previous bare-L2E init left the L2 ECC
array uninitialized for the kernel's 0x1E0000 set, machine-checking VxWorks
(MCSR[IF], L2ERRDET MBECC).
Also: ePAPR spin-table SMP bring-up of all four cores, ELF in-place loader
staging-overlap fix, DPAA/LIODN + QMan/BMan init, 64-bit OS handoff
(LAW/TLB/IVOR), and NAII 68PPC2 + CW VPX3-152 board configs.
Cleanup STM32H5 HAL port.
Refactor `__ARM_FEATURE_CMSE` to `TZ_SECURE()`
Refactor attribute cmse_nonsecure_entry to use new macro `CSME_NSE_API`
Added TPM Non Secure Callable API's
Added TPM support to STM32H5 test application
- Support ELF scatter-loading on TC3xx
- Modify TC3xx HAL flash erase to support arbitrary offsets and sizes
- Realign partition size and addresses to support more efficient sector mass erase on update
* Added nRF5340 driver support for Clock, Internal Flash (NVMC), GPIO, SPU, OTP, UART, SPI, QSPI and IPC.
* Added support for updating the network core (Sign using "--id 2")
* Cleanup the nRF52 port
* Improved external QSPI and internal Flash tests and logging.
* Improved internal printf support for formatter length.
* Fixed PPC spin table based on ePAPR 1.1.
* Added flattened device tree (FDT) support. Setting required FDT fields per ePAPR 1.1.
* Added Frame Manager microcode upload.
* Fixed CPLD and setting QE clock.
* Added support for setting logical device numbers and updated device tree.
* Fixed QUICC Engine base address (was incorrect, should be 0x140000).
* Fixed "cpu-release-addr" to use 64-bit value.
* Added secondary cached boot page.
* Added L2 cache support to multi-core.
* Added flattened device tree parser tool for testing (`make fdt-parser` and `tools/fdt-parser/fdt-parser`).
* Added checks for FDT header.
* Added automated test case for NXP T1024 FDT.
leave the encryption key for wolfBoot_success to erase.
FINAL_SWAP was also stopping the case where the partition was put into testing before the update sector status flags could be erased. now, don't erase the update sector flags. instead put the update partition in IMG_STATE_FINAL_FLAGS state before putting the boot partition in IMG_STATE_TESTING. Then only erase the update sector flags on wolfBoot_update_trigger. under this scheme, the sector flags are intact if the power failed before we could set IMG_STATE_TESTING but are wiped if we do need to swap over after after wolfBoot_success fails to be called
Daniele Lacamera
David Garske
Brett Nicholas
gojimmypi
Daniele Lacamera
jordan
Marco Oliverio
John Bland