/* main.c * * Test bare-metal blinking led application * * Copyright (C) 2018 wolfSSL Inc. * * This file is part of wolfBoot. * * wolfBoot is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * wolfBoot is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA */ #include #include #include "system.h" #include "timer.h" #include "led.h" #ifdef PLATFORM_stm32f4 void main(void) { flash_set_waitstates(); clock_config(); led_pwm_setup(); pwm_init(CPU_FREQ, 0); /* Dim the led by altering the PWM duty-cicle * in isr_tim2 (timer.c) * * Every 50ms, the duty cycle of the PWM connected * to the blue led increases/decreases making a pulse * effect. */ timer_init(CPU_FREQ, 1, 50); asm volatile ("cpsie i"); while(1) WFI(); } #endif #ifdef PLATFORM_nrf52 #define GPIO_BASE (0x50000000) #define GPIO_OUT *((volatile uint32_t *)(GPIO_BASE + 0x504)) #define GPIO_OUTSET *((volatile uint32_t *)(GPIO_BASE + 0x508)) #define GPIO_OUTCLR *((volatile uint32_t *)(GPIO_BASE + 0x50C)) #define GPIO_PIN_CNF ((volatile uint32_t *)(GPIO_BASE + 0x700)) // Array static void gpiotoggle(uint32_t pin) { uint32_t reg_val = GPIO_OUT; GPIO_OUTCLR = reg_val & (1 << pin); GPIO_OUTSET = (~reg_val) & (1 << pin); } void main(void) { uint32_t pin = 19; int i; GPIO_PIN_CNF[pin] = 1; /* Output */ while(1) { gpiotoggle(pin); for (i = 0; i < 800000; i++) // Wait a bit. asm volatile ("nop"); } } #endif