wolfBoot/hal/versal.its

/dts-v1/;

/ {
    description = "Xilinx Versal VMK180 - wolfBoot Linux";
    #address-cells = <1>;

    images {
        kernel-1 {
            description = "Linux Kernel";
            data = /incbin/("../Image");
            type = "kernel";
            arch = "arm64";
            os = "linux";
            compression = "none";
            load = <0x00200000>;
            entry = <0x00200000>;
            hash-1 {
                algo = "sha256";
            };
        };
        fdt-1 {
            description = "Flattened Device Tree blob";
            data = /incbin/("../system-default.dtb");
            type = "flat_dt";
            arch = "arm64";
            compression = "none";
            load = <0x00001000>;
            hash-1 {
                algo = "sha256";
            };
        };
        /* FPGA bitstream sub-image (requires FPGA_BITSTREAM=1). Add the
         * "fpga = ..." reference to the configuration node below. The
         * bitstream must be a bootgen .bin staged to its load address.
         * NOTE: Versal PL config is a PDI loaded by the PLM (XilLoader
         * Load-PDI IPI) - the wolfBoot Versal hal_fpga_load is currently
         * a stub, so leave this disabled on Versal. On ZynqMP/Zynq-7000
         * this is the working convention.
         *
         * As emitted by mkimage the fpga node is usually gzip-compressed
         * and has no "load" property; set WOLFBOOT_LOAD_FPGA_ADDRESS to a
         * DDR staging address and build with GZIP=1.
         *
         * fpga-1 {
         *     description = "FPGA bitstream";
         *     data = /incbin/("../system.bit.bin.gz");
         *     type = "fpga";
         *     arch = "arm64";
         *     compression = "gzip";
         *     compatible = "u-boot,fpga-legacy";
         *     hash-1 {
         *         algo = "sha256";
         *     };
         * };
         */
    };
    configurations {
        default = "conf1";
        conf1 {
            description = "Linux kernel and FDT blob";
            kernel = "kernel-1";
            fdt = "fdt-1";
            /* fpga = "fpga-1"; */
            hash-1 {
                algo = "sha256";
            };
        };
    };
};