mirror of https://github.com/wolfSSL/wolfBoot.git
cbaecdd5d8
hal/zynq.c:
- Route IOU_TAPDLY_BYPASS writes through pmu_request at EL<=2 in the
<=40 MHz and <=100 MHz branches (previously only done at <=150 MHz);
the register is equally unwritable from EL2/EL1 at lower clocks.
- Add qspi_flash_reset() (RESET_ENABLE 0x66 + RESET_MEMORY 0x99),
called per chip in qspi_init so the flash starts from a known state
regardless of what FSBL/BootROM left behind (XIP, 4-byte addr,
auto-boot).
- Drop unused 'reg' in csu_aes and 'ms' in csu_init so
-Werror=unused-variable builds (OPTIMIZATION_LEVEL=0 / DEBUG=1) pass.
hal/zynq.ld:
- Move wolfBoot ORIGIN from 0x08000000 to 0x10000000. Large FIT images
(kernel load=0x00200000, payload >~126 MB) would sweep across
0x08000000 at handoff and overwrite wolfBoot's own code.
tools/scripts/zcu102/zcu102-ca53-qspi.cmm:
- Rewrite against the Lauterbach TRACE32 ZCU102 QSPI demo: PREPAREONLY
entry mode, single/dual toggle, READ_ID_TEST, separate flash dialogs
for BOOT.BIN (offset 0) and test-app/image_v1_signed.bin.
- Document the ~128 MB TRACE32 temp-memory ceiling on FLASHFILE.Create:
larger files must be split externally and loaded in chunks.
|
||
|---|---|---|
| .. | ||
| zcu102-ca53-qspi.cmm | ||
| zcu102-debug-wolfboot.cmm | ||
| zynqmp_sd_boot.bif | ||