WolfSSL
/
wolfBoot
mirror of https://github.com/wolfSSL/wolfBoot.git
1
0
Fork 0
Code Issues Releases Wiki Activity
wolfBoot/hal/nxp_t2080.c

582 lines
23 KiB
C
Raw Blame History

/* nxp_t2080.c
*
* Copyright (C) 2022 wolfSSL Inc.
*
* This file is part of wolfBoot.
*
* wolfBoot is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* wolfBoot is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
*/
#include <stdint.h>
#include "target.h"
#include "printf.h"
#include "image.h" /* for RAMFUNCTION */
#include "nxp_ppc.h"
/* Tested on T2080E Rev 1.1, e6500 core 2.0, PVR 8040_0120 and SVR 8538_0011 */
/* T2080 */
#define SYS_CLK (600000000) /* 100MHz PLL with 6:1 = 600 MHz */
/* T2080 PC16552D Dual UART */
#define BAUD_RATE 115200
#define UART_SEL 0 /* select UART 0 or 1 */
#define UART_BASE(n) (CCSRBAR + 0x11C500 + (n * 0x1000))
#define UART_RBR(n) *((volatile uint8_t*)(UART_BASE(n) + 0)) /* receiver buffer register */
#define UART_THR(n) *((volatile uint8_t*)(UART_BASE(n) + 0)) /* transmitter holding register */
#define UART_IER(n) *((volatile uint8_t*)(UART_BASE(n) + 1)) /* interrupt enable register */
#define UART_IIR(n) *((volatile uint8_t*)(UART_BASE(n) + 2)) /* interrupt ID register */
#define UART_FCR(n) *((volatile uint8_t*)(UART_BASE(n) + 2)) /* FIFO control register */
#define UART_LCR(n) *((volatile uint8_t*)(UART_BASE(n) + 3)) /* line control register */
#define UART_MCR(n) *((volatile uint8_t*)(UART_BASE(n) + 4)) /* modem control register */
#define UART_LSR(n) *((volatile uint8_t*)(UART_BASE(n) + 5)) /* line status register */
/* enabled when UART_LCR_DLAB set */
#define UART_DLB(n) *((volatile uint8_t*)(UART_BASE(n) + 0)) /* divisor least significant byte register */
#define UART_DMB(n) *((volatile uint8_t*)(UART_BASE(n) + 1)) /* divisor most significant byte register */
#define UART_FCR_TFR (0x04) /* Transmitter FIFO reset */
#define UART_FCR_RFR (0x02) /* Receiver FIFO reset */
#define UART_FCR_FEN (0x01) /* FIFO enable */
#define UART_LCR_DLAB (0x80) /* Divisor latch access bit */
#define UART_LCR_WLS (0x03) /* Word length select: 8-bits */
#define UART_LSR_TEMT (0x40) /* Transmitter empty */
#define UART_LSR_THRE (0x20) /* Transmitter holding register empty */
/* T2080 IFC (Integrated Flash Controller) - RM 13.3 */
#define IFC_BASE (CCSRBAR + 0x00124000)
#define IFC_MAX_BANKS 8
#define IFC_CSPR_EXT(n) *((volatile uint32_t*)(IFC_BASE + 0x000C + (n * 0xC))) /* Extended Base Address */
#define IFC_CSPR(n) *((volatile uint32_t*)(IFC_BASE + 0x0010 + (n * 0xC))) /* Chip-select Property */
#define IFC_AMASK(n) *((volatile uint32_t*)(IFC_BASE + 0x00A0 + (n * 0xC)))
#define IFC_CSOR(n) *((volatile uint32_t*)(IFC_BASE + 0x0130 + (n * 0xC)))
#define IFC_CSOR_EXT(n) *((volatile uint32_t*)(IFC_BASE + 0x0134 + (n * 0xC)))
#define IFC_FTIM0(n) *((volatile uint32_t*)(IFC_BASE + 0x01C0 + (n * 0x30)))
#define IFC_FTIM1(n) *((volatile uint32_t*)(IFC_BASE + 0x01C4 + (n * 0x30)))
#define IFC_FTIM2(n) *((volatile uint32_t*)(IFC_BASE + 0x01C8 + (n * 0x30)))
#define IFC_FTIM3(n) *((volatile uint32_t*)(IFC_BASE + 0x01CC + (n * 0x30)))
#define IFC_CSPR_PHYS_ADDR(x) (((uint32_t)x) & 0xFFFF0000) /* Physical base address */
#define IFC_CSPR_PORT_SIZE_8 0x00000080 /* Port Size 8 */
#define IFC_CSPR_PORT_SIZE_16 0x00000100 /* Port Size 16 */
#define IFC_CSPR_WP 0x00000040 /* Write Protect */
#define IFC_CSPR_MSEL_NOR 0x00000000 /* Mode Select - NOR */
#define IFC_CSPR_MSEL_NAND 0x00000002 /* Mode Select - NAND */
#define IFC_CSPR_MSEL_GPCM 0x00000004 /* Mode Select - GPCM (General-purpose chip-select machine) */
#define IFC_CSPR_V 0x00000001 /* Bank Valid */
/* NOR Timings (IFC clocks) */
#define IFC_FTIM0_NOR_TACSE(n) (((n) & 0x0F) << 28) /* After address hold cycle */
#define IFC_FTIM0_NOR_TEADC(n) (((n) & 0x3F) << 16) /* External latch address delay cycles */
#define IFC_FTIM0_NOR_TAVDS(n) (((n) & 0x3F) << 8) /* Delay between CS assertion */
#define IFC_FTIM0_NOR_TEAHC(n) (((n) & 0x3F) << 0) /* External latch address hold cycles */
#define IFC_FTIM1_NOR_TACO(n) (((n) & 0xFF) << 24) /* CS assertion to output enable */
#define IFC_FTIM1_NOR_TRAD(n) (((n) & 0x3F) << 8) /* read access delay */
#define IFC_FTIM1_NOR_TSEQ(n) (((n) & 0x3F) << 0) /* sequential read access delay */
#define IFC_FTIM2_NOR_TCS(n) (((n) & 0x0F) << 24) /* Chip-select assertion setup time */
#define IFC_FTIM2_NOR_TCH(n) (((n) & 0x0F) << 18) /* Chip-select hold time */
#define IFC_FTIM2_NOR_TWPH(n) (((n) & 0x3F) << 10) /* Chip-select hold time */
#define IFC_FTIM2_NOR_TWP(n) (((n) & 0xFF) << 0) /* Write enable pulse width */
/* GPCM Timings (IFC clocks) */
#define IFC_FTIM0_GPCM_TACSE(n) (((n) & 0x0F) << 28) /* After address hold cycle */
#define IFC_FTIM0_GPCM_TEADC(n) (((n) & 0x3F) << 16) /* External latch address delay cycles */
#define IFC_FTIM0_GPCM_TEAHC(n) (((n) & 0x3F) << 0) /* External latch address hold cycles */
#define IFC_FTIM1_GPCM_TACO(n) (((n) & 0xFF) << 24) /* CS assertion to output enable */
#define IFC_FTIM1_GPCM_TRAD(n) (((n) & 0x3F) << 8) /* read access delay */
#define IFC_FTIM2_GPCM_TCS(n) (((n) & 0x0F) << 24) /* Chip-select assertion setup time */
#define IFC_FTIM2_GPCM_TCH(n) (((n) & 0x0F) << 18) /* Chip-select hold time */
#define IFC_FTIM2_GPCM_TWP(n) (((n) & 0xFF) << 0) /* Write enable pulse width */
/* IFC AMASK - RM Table 13-3 - Count of MSB minus 1 */
enum ifc_amask_sizes {
IFC_AMASK_64KB = 0xFFFF0000,
IFC_AMASK_128KB = 0xFFFE0000,
IFC_AMASK_256KB = 0xFFFC0000,
IFC_AMASK_512KB = 0xFFF80000,
IFC_AMASK_1MB = 0xFFF00000,
IFC_AMASK_2MB = 0xFFE00000,
IFC_AMASK_4MB = 0xFFC00000,
IFC_AMASK_8MB = 0xFF800000,
IFC_AMASK_16MB = 0xFF000000,
IFC_AMASK_32MB = 0xFE000000,
IFC_AMASK_64MB = 0xFC000000,
IFC_AMASK_128MB = 0xF8000000,
IFC_AMASK_256MB = 0xF0000000,
IFC_AMASK_512MB = 0xE0000000,
IFC_AMASK_1GB = 0xC0000000,
IFC_AMASK_2GB = 0x80000000,
IFC_AMASK_4GB = 0x00000000,
};
/* NOR Flash */
#define FLASH_BASE 0xE8000000
#define FLASH_BANK_SIZE (128*1024*1024)
#define FLASH_PAGE_SIZE (1024) /* program buffer */
#define FLASH_SECTOR_SIZE (128*1024)
#define FLASH_SECTORS (FLASH_BANK_SIZE / FLASH_SECTOR_SIZE)
#define FLASH_CFI_16BIT 0x02 /* word */
#define FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
#if 0
#define ENABLE_CPLD
#endif
/* CPLD */
#define CPLD_BASE 0xFFDF0000
#define CPLD_BASE_PHYS_HIGH 0xFULL
#define CPLD_SPARE 0x00
#define CPLD_SATA_MUX_SEL 0x02
#define CPLD_BANK_SEL 0x04
#define CPLD_FW_REV 0x06
#define CPLD_TTL_RW 0x08
#define CPLD_TTL_LPBK 0x0A
#define CPLD_TTL_DATA 0x0C
#define CPLD_PROC_STATUS 0x0E /* write 1 to enable proc reset function, reset default value is 0 */
#define CPLD_FPGA_RDY 0x10 /* read only when reg read 0x0DB1 then fpga is ready */
#define CPLD_PCIE_SW_RESET 0x12 /* write 1 to reset the PCIe switch */
#define CPLD_WR_TTL_INT_EN 0x14
#define CPLD_WR_TTL_INT_DIR 0x16
#define CPLD_INT_STAT 0x18
#define CPLD_WR_TEMP_ALM_OVRD 0x1A /* write 0 to enable temp shutdown. reset default value is 1 */
#define CPLD_PWR_DWN_CMD 0x1C
#define CPLD_TEMP_ALM_INT_STAT 0x1E
#define CPLD_WR_TEMP_ALM_INT_EN 0x20
#define CPLD_FLASH_BANK_0 0x00
#define CPLD_FLASH_BANK_1 0x01
#define CPLD_DATA(n) *((volatile uint8_t*)(CPLD_BASE + n))
/* SATA */
#define SATA_ENBL (*(volatile uint32_t *)(0xB1003F4C)) /* also saw 0xB4003F4C */
/* DDR */
/* NAII 68PPC2 - 8GB discrete DDR3 IM8G08D3EBDG-15E */
/* 1333.333 MT/s data rate 8 GiB (DDR3, 64-bit, CL=9, ECC on) */
#define DDR_N_RANKS 2
#define DDR_RANK_DENS 0x100000000
#define DDR_SDRAM_WIDTH 64
#define DDR_EC_SDRAM_W 8
#define DDR_N_ROW_ADDR 16
#define DDR_N_COL_ADDR 10
#define DDR_N_BANKS 8
#define DDR_EDC_CONFIG 2
#define DDR_BURSTL_MASK 0x0c
#define DDR_TCKMIN_X_PS 1500
#define DDR_TCMMAX_PS 3000
#define DDR_CASLAT_X 0x000007E0
#define DDR_TAA_PS 13500
#define DDR_TRCD_PS 13500
#define DDR_TRP_PS 13500
#define DDR_TRAS_PS 36000
#define DDR_TRC_PS 49500
#define DDR_TFAW_PS 30000
#define DDR_TWR_PS 15000
#define DDR_TRFC_PS 260000
#define DDR_TRRD_PS 6000
#define DDR_TWTR_PS 7500
#define DDR_TRTP_PS 7500
#define DDR_REF_RATE_PS 7800000
#define DDR_CS0_BNDS_VAL 0x000000FF
#define DDR_CS1_BNDS_VAL 0x010001FF
#define DDR_CS2_BNDS_VAL 0x0300033F
#define DDR_CS3_BNDS_VAL 0x0340037F
#define DDR_CS0_CONFIG_VAL 0x80044402
#define DDR_CS1_CONFIG_VAL 0x80044402
#define DDR_CS2_CONFIG_VAL 0x00000202
#define DDR_CS3_CONFIG_VAL 0x00040202
#define DDR_CS_CONFIG_2_VAL 0x00000000
#define DDR_TIMING_CFG_0_VAL 0xFF530004
#define DDR_TIMING_CFG_1_VAL 0x98906345
#define DDR_TIMING_CFG_2_VAL 0x0040A114
#define DDR_TIMING_CFG_3_VAL 0x010A1100
#define DDR_TIMING_CFG_4_VAL 0x00000001
#define DDR_TIMING_CFG_5_VAL 0x04402400
#define DDR_SDRAM_MODE_VAL 0x00441C70
#define DDR_SDRAM_MODE_2_VAL 0x00980000
#define DDR_SDRAM_MODE_3_8_VAL 0x00000000
#define DDR_SDRAM_MD_CNTL_VAL 0x00000000
#define DDR_SDRAM_CFG_VAL 0xE7040000
#define DDR_SDRAM_CFG_2_VAL 0x00401010
#define DDR_SDRAM_INTERVAL_VAL 0x0C300100
#define DDR_DATA_INIT_VAL 0xDEADBEEF
#define DDR_SDRAM_CLK_CNTL_VAL 0x02400000
#define DDR_ZQ_CNTL_VAL 0x89080600
#define DDR_WRLVL_CNTL_VAL 0x8675F604
#define DDR_WRLVL_CNTL_2_VAL 0x05060607
#define DDR_WRLVL_CNTL_3_VAL 0x080A0A0B
#define DDR_SDRAM_RCW_1_VAL 0x00000000
#define DDR_SDRAM_RCW_2_VAL 0x00000000
#define DDR_DDRCDR_1_VAL 0x80040000
#define DDR_DDRCDR_2_VAL 0x00000001
#define DDR_ERR_INT_EN_VAL 0x0000001D
#define DDR_ERR_SBE_VAL 0x00010000
/* 12.4 DDR Memory Map */
#define DDR_BASE (CCSRBAR + 0x8000)
#define DDR_CS_BNDS(n) *((volatile uint32_t*)(DDR_BASE + 0x000 + (n * 8))) /* Chip select n memory bounds */
#define DDR_CS_CONFIG(n) *((volatile uint32_t*)(DDR_BASE + 0x080 + (n * 4))) /* Chip select n configuration */
#define DDR_CS_CONFIG_2(n) *((volatile uint32_t*)(DDR_BASE + 0x0C0 + (n * 4))) /* Chip select n configuration 2 */
#define DDR_SDRAM_CFG *((volatile uint32_t*)(DDR_BASE + 0x110)) /* DDR SDRAM control configuration */
#define DDR_SDRAM_CFG_2 *((volatile uint32_t*)(DDR_BASE + 0x114)) /* DDR SDRAM control configuration 2 */
#define DDR_SDRAM_INTERVAL *((volatile uint32_t*)(DDR_BASE + 0x124)) /* DDR SDRAM interval configuration */
#define DDR_INIT_ADDR *((volatile uint32_t*)(DDR_BASE + 0x148)) /* DDR training initialization address */
#define DDR_INIT_EXT_ADDR *((volatile uint32_t*)(DDR_BASE + 0x14C)) /* DDR training initialization extended address */
#define DDR_DATA_INIT *((volatile uint32_t*)(DDR_BASE + 0x128)) /* DDR training initialization value */
#define DDR_TIMING_CFG_0 *((volatile uint32_t*)(DDR_BASE + 0x104)) /* DDR SDRAM timing configuration 0 */
#define DDR_TIMING_CFG_1 *((volatile uint32_t*)(DDR_BASE + 0x108)) /* DDR SDRAM timing configuration 1 */
#define DDR_TIMING_CFG_2 *((volatile uint32_t*)(DDR_BASE + 0x10C)) /* DDR SDRAM timing configuration 2 */
#define DDR_TIMING_CFG_3 *((volatile uint32_t*)(DDR_BASE + 0x100)) /* DDR SDRAM timing configuration 3 */
#define DDR_TIMING_CFG_4 *((volatile uint32_t*)(DDR_BASE + 0x160)) /* DDR SDRAM timing configuration 4 */
#define DDR_TIMING_CFG_5 *((volatile uint32_t*)(DDR_BASE + 0x164)) /* DDR SDRAM timing configuration 5 */
#define DDR_TIMING_CFG_6 *((volatile uint32_t*)(DDR_BASE + 0x168)) /* DDR SDRAM timing configuration 6 */
#define DDR_ZQ_CNTL *((volatile uint32_t*)(DDR_BASE + 0x170)) /* DDR ZQ calibration control */
#define DDR_WRLVL_CNTL *((volatile uint32_t*)(DDR_BASE + 0x174)) /* DDR write leveling control */
#define DDR_WRLVL_CNTL_2 *((volatile uint32_t*)(DDR_BASE + 0x190)) /* DDR write leveling control 2 */
#define DDR_WRLVL_CNTL_3 *((volatile uint32_t*)(DDR_BASE + 0x194)) /* DDR write leveling control 3 */
#define DDR_SR_CNTR *((volatile uint32_t*)(DDR_BASE + 0x17C)) /* DDR Self Refresh Counter */
#define DDR_SDRAM_RCW_1 *((volatile uint32_t*)(DDR_BASE + 0x180)) /* DDR Register Control Word 1 */
#define DDR_SDRAM_RCW_2 *((volatile uint32_t*)(DDR_BASE + 0x184)) /* DDR Register Control Word 2 */
#define DDR_DDRCDR_1 *((volatile uint32_t*)(DDR_BASE + 0xB28)) /* DDR Control Driver Register 1 */
#define DDR_DDRCDR_2 *((volatile uint32_t*)(DDR_BASE + 0xB2C)) /* DDR Control Driver Register 2 */
#define DDR_DDRDSR_1 *((volatile uint32_t*)(DDR_BASE + 0xB20)) /* DDR Debug Status Register 1 */
#define DDR_DDRDSR_2 *((volatile uint32_t*)(DDR_BASE + 0xB24)) /* DDR Debug Status Register 2 */
#define DDR_ERR_DISABLE *((volatile uint32_t*)(DDR_BASE + 0xE44)) /* Memory error disable */
#define DDR_ERR_INT_EN *((volatile uint32_t*)(DDR_BASE + 0xE48)) /* Memory error interrupt enable */
#define DDR_ERR_SBE *((volatile uint32_t*)(DDR_BASE + 0xE58)) /* Single-Bit ECC memory error management */
#define DDR_SDRAM_MODE *((volatile uint32_t*)(DDR_BASE + 0x118)) /* DDR SDRAM mode configuration */
#define DDR_SDRAM_MODE_2 *((volatile uint32_t*)(DDR_BASE + 0x11C)) /* DDR SDRAM mode configuration 2 */
#define DDR_SDRAM_MODE_3 *((volatile uint32_t*)(DDR_BASE + 0x200)) /* DDR SDRAM mode configuration 3 */
#define DDR_SDRAM_MODE_4 *((volatile uint32_t*)(DDR_BASE + 0x204)) /* DDR SDRAM mode configuration 4 */
#define DDR_SDRAM_MODE_5 *((volatile uint32_t*)(DDR_BASE + 0x208)) /* DDR SDRAM mode configuration 5 */
#define DDR_SDRAM_MODE_6 *((volatile uint32_t*)(DDR_BASE + 0x20C)) /* DDR SDRAM mode configuration 6 */
#define DDR_SDRAM_MODE_7 *((volatile uint32_t*)(DDR_BASE + 0x210)) /* DDR SDRAM mode configuration 7 */
#define DDR_SDRAM_MODE_8 *((volatile uint32_t*)(DDR_BASE + 0x214)) /* DDR SDRAM mode configuration 8 */
#define DDR_SDRAM_MD_CNTL *((volatile uint32_t*)(DDR_BASE + 0x120)) /* DDR SDRAM mode control */
#define DDR_SDRAM_CLK_CNTL *((volatile uint32_t*)(DDR_BASE + 0x130)) /* DDR SDRAM clock control */
#define DDR_SDRAM_CFG_MEM_EN 0x80000000 /* SDRAM interface logic is enabled */
#define DDR_SDRAM_CFG_2_D_INIT 0x00000010 /* data initialization in progress */
/* generic share NXP QorIQ driver code */
#include "nxp_ppc.c"
#ifdef DEBUG_UART
void uart_init(void)
{
/* calc divisor for UART
* example config values:
* clock_div, baud, base_clk 163 115200 300000000
* +0.5 to round up
*/
uint32_t div = (((SYS_CLK / 2.0) / (16 * BAUD_RATE)) + 0.5);
while (!(UART_LSR(UART_SEL) & UART_LSR_TEMT))
;
/* set ier, fcr, mcr */
UART_IER(UART_SEL) = 0;
UART_FCR(UART_SEL) = (UART_FCR_TFR | UART_FCR_RFR | UART_FCR_FEN);
/* enable baud rate access (DLAB=1) - divisor latch access bit*/
UART_LCR(UART_SEL) = (UART_LCR_DLAB | UART_LCR_WLS);
/* set divisor */
UART_DLB(UART_SEL) = (div & 0xff);
UART_DMB(UART_SEL) = ((div>>8) & 0xff);
/* disable rate access (DLAB=0) */
UART_LCR(UART_SEL) = (UART_LCR_WLS);
}
void uart_write(const char* buf, uint32_t sz)
{
uint32_t pos = 0;
while (sz-- > 0) {
char c = buf[pos++];
if (c == '\n') { /* handle CRLF */
while ((UART_LSR(UART_SEL) & UART_LSR_THRE) == 0);
UART_THR(UART_SEL) = '\r';
}
while ((UART_LSR(UART_SEL) & UART_LSR_THRE) == 0);
UART_THR(UART_SEL) = c;
}
}
#endif /* DEBUG_UART */
void law_init(void)
{
/* Buffer Manager (BMan) (control) - probably not required */
set_law(3, 0xF, 0xF4000000, LAW_TRGT_BMAN, LAW_SIZE_32MB, 1);
}
static void hal_flash_init(void)
{
/* IFC - NOR Flash */
/* LAW is also set in boot_ppc_start.S:flash_law */
set_law(1, FLASH_BASE_PHYS_HIGH, FLASH_BASE, LAW_TRGT_IFC, LAW_SIZE_128MB, 1);
/* NOR IFC Flash Timing Parameters */
IFC_FTIM0(0) = (IFC_FTIM0_NOR_TACSE(4) | \
IFC_FTIM0_NOR_TEADC(5) | \
IFC_FTIM0_NOR_TEAHC(5));
IFC_FTIM1(0) = (IFC_FTIM1_NOR_TACO(53) |
IFC_FTIM1_NOR_TRAD(26) |
IFC_FTIM1_NOR_TSEQ(19));
IFC_FTIM2(0) = (IFC_FTIM2_NOR_TCS(4) |
IFC_FTIM2_NOR_TCH(4) |
IFC_FTIM2_NOR_TWPH(14) |
IFC_FTIM2_NOR_TWP(28));
IFC_FTIM3(0) = 0;
/* NOR IFC Definitions (CS0) */
IFC_CSPR_EXT(0) = (0xF);
IFC_CSPR(0) = (IFC_CSPR_PHYS_ADDR(FLASH_BASE) | \
IFC_CSPR_PORT_SIZE_16 | \
IFC_CSPR_MSEL_NOR | \
IFC_CSPR_V);
IFC_AMASK(0) = IFC_AMASK_128MB;
IFC_CSOR(0) = 0x0000000C; /* TRHZ (80 clocks for read enable high) */
}
static void hal_ddr_init(void)
{
#ifdef ENABLE_DDR
/* Map LAW for DDR */
set_law(4, 0, 0, LAW_TRGT_DDR_1, LAW_SIZE_2GB, 0);
/* If DDR is already enabled then just return */
if (DDR_SDRAM_CFG & DDR_SDRAM_CFG_MEM_EN) {
return;
}
/* Setup DDR CS (chip select) bounds */
DDR_CS_BNDS(0) = DDR_CS0_BNDS_VAL;
DDR_CS_CONFIG(0) = DDR_CS0_CONFIG_VAL;
DDR_CS_CONFIG_2(0) = DDR_CS_CONFIG_2_VAL;
DDR_CS_BNDS(1) = DDR_CS1_BNDS_VAL;
DDR_CS_CONFIG(1) = DDR_CS1_CONFIG_VAL;
DDR_CS_CONFIG_2(1) = DDR_CS_CONFIG_2_VAL;
DDR_CS_BNDS(2) = DDR_CS2_BNDS_VAL;
DDR_CS_CONFIG(2) = DDR_CS2_CONFIG_VAL;
DDR_CS_CONFIG_2(2) = DDR_CS_CONFIG_2_VAL;
DDR_CS_BNDS(3) = DDR_CS3_BNDS_VAL;
DDR_CS_CONFIG(3) = DDR_CS3_CONFIG_VAL;
DDR_CS_CONFIG_2(3) = DDR_CS_CONFIG_2_VAL;
/* DDR SDRAM timing configuration */
DDR_TIMING_CFG_0 = DDR_TIMING_CFG_0_VAL;
DDR_TIMING_CFG_1 = DDR_TIMING_CFG_1_VAL;
DDR_TIMING_CFG_2 = DDR_TIMING_CFG_2_VAL;
DDR_TIMING_CFG_3 = DDR_TIMING_CFG_3_VAL;
DDR_TIMING_CFG_4 = DDR_TIMING_CFG_4_VAL;
DDR_TIMING_CFG_5 = DDR_TIMING_CFG_5_VAL;
/* DDR SDRAM mode configuration */
DDR_SDRAM_MODE = DDR_SDRAM_MODE_VAL;
DDR_SDRAM_MODE_2 = DDR_SDRAM_MODE_2_VAL;
DDR_SDRAM_MODE_3 = DDR_SDRAM_MODE_3_8_VAL;
DDR_SDRAM_MODE_4 = DDR_SDRAM_MODE_3_8_VAL;
DDR_SDRAM_MODE_5 = DDR_SDRAM_MODE_3_8_VAL;
DDR_SDRAM_MODE_6 = DDR_SDRAM_MODE_3_8_VAL;
DDR_SDRAM_MODE_7 = DDR_SDRAM_MODE_3_8_VAL;
DDR_SDRAM_MODE_8 = DDR_SDRAM_MODE_3_8_VAL;
DDR_SDRAM_MD_CNTL = DDR_SDRAM_MD_CNTL_VAL;
/* DDR Configuration */
DDR_SDRAM_INTERVAL = DDR_SDRAM_INTERVAL_VAL;
DDR_SDRAM_CLK_CNTL = DDR_SDRAM_CLK_CNTL_VAL;
DDR_DATA_INIT = DDR_DATA_INIT_VAL;
DDR_ZQ_CNTL = DDR_ZQ_CNTL_VAL;
DDR_WRLVL_CNTL = DDR_WRLVL_CNTL_VAL;
DDR_WRLVL_CNTL_2 = DDR_WRLVL_CNTL_2_VAL;
DDR_WRLVL_CNTL_3 = DDR_WRLVL_CNTL_3_VAL;
DDR_SR_CNTR = 0;
DDR_SDRAM_RCW_1 = 0;
DDR_SDRAM_RCW_2 = 0;
DDR_DDRCDR_1 = DDR_DDRCDR_1_VAL;
DDR_DDRCDR_2 = DDR_DDRCDR_2_VAL;
DDR_SDRAM_CFG_2 = DDR_SDRAM_CFG_2_VAL;
DDR_INIT_ADDR = 0;
DDR_INIT_EXT_ADDR = 0;
DDR_ERR_DISABLE = 0;
DDR_ERR_INT_EN = DDR_ERR_INT_EN_VAL;
DDR_ERR_SBE = DDR_ERR_SBE_VAL;
/* Set values, but do not enable the DDR yet */
DDR_SDRAM_CFG = (DDR_SDRAM_CFG_VAL & ~DDR_SDRAM_CFG_MEM_EN);
/* TODO: Errata A009942 */
/* Enable controller */
DDR_SDRAM_CFG |= DDR_SDRAM_CFG_MEM_EN;
__asm__ __volatile__("sync;isync");
/* Wait for data initialization is complete */
while ((DDR_SDRAM_CFG_2 & DDR_SDRAM_CFG_2_D_INIT));
#endif
}
void hal_early_init(void)
{
hal_ddr_init();
}
static void hal_cpld_init(void)
{
#ifdef ENABLE_CPLD
/* CPLD IFC Timing Parameters */
IFC_FTIM0(3) = (IFC_FTIM0_GPCM_TACSE(16UL) |
IFC_FTIM0_GPCM_TEADC(16UL) |
IFC_FTIM0_GPCM_TEAHC(16UL));
IFC_FTIM1(3) = (IFC_FTIM1_GPCM_TACO(16UL) |
IFC_FTIM1_GPCM_TRAD(31UL));
IFC_FTIM2(3) = (IFC_FTIM2_GPCM_TCS(16UL) |
IFC_FTIM2_GPCM_TCH(8UL) |
IFC_FTIM2_GPCM_TWP(31UL));
IFC_FTIM3(3) = 0;
/* CPLD IFC Definitions (CS3) */
IFC_CSPR_EXT(3) = CPLD_BASE_PHYS_HIGH;
IFC_CSPR(3) = (IFC_CSPR_PHYS_ADDR(CPLD_BASE) |
IFC_CSPR_PORT_SIZE_16 |
IFC_CSPR_MSEL_GPCM |
IFC_CSPR_V);
IFC_AMASK(3) = IFC_AMASK_64KB;
IFC_CSOR(3) = 0;
/* IFC - CPLD */
set_law(2, CPLD_BASE_PHYS_HIGH, CPLD_BASE,
LAW_TRGT_IFC, LAW_SIZE_4KB, 1);
/* CPLD - TBL=1, Entry 17 */
set_tlb(1, 17, CPLD_BASE, CPLD_BASE, CPLD_BASE_PHYS_HIGH,
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
0, BOOKE_PAGESZ_4K, 1);
#endif
}
void hal_init(void)
{
#ifdef DEBUG_UART
uint32_t fw;
#endif
law_init();
#ifdef DEBUG_UART
uart_init();
uart_write("wolfBoot Init\n", 14);
#endif
hal_flash_init();
hal_cpld_init();
#ifdef ENABLE_CPLD
CPLD_DATA(CPLD_PROC_STATUS) = 1; /* Enable proc reset */
CPLD_DATA(CPLD_WR_TEMP_ALM_OVRD) = 0; /* Enable temp alarm */
#ifdef DEBUG_UART
fw = CPLD_DATA(CPLD_FW_REV);
wolfBoot_printf("CPLD FW Rev: 0x%x\n", fw);
#endif
#endif /* ENABLE_CPLD */
#if 0 /* not tested */
/* Disable SATA Write Protection */
SATA_ENBL = 0;
#endif
}
int hal_flash_write(uint32_t address, const uint8_t *data, int len)
{
(void)address;
(void)data;
(void)len;
/* TODO: Implement NOR flash write using IFC */
return 0;
}
int hal_flash_erase(uint32_t address, int len)
{
(void)address;
(void)len;
/* TODO: Implement NOR flash erase using IFC */
return 0;
}
void hal_flash_unlock(void)
{
/* Disable all flash protection bits */
/* enter Non-volatile protection mode (C0h) */
*((volatile uint16_t*)(FLASH_BASE + 0xAAA)) = 0xAAAA;
*((volatile uint16_t*)(FLASH_BASE + 0x554)) = 0x5555;
*((volatile uint16_t*)(FLASH_BASE + 0xAAA)) = 0xC0C0;
/* clear all protection bit (80h/30h) */
*((volatile uint16_t*)(FLASH_BASE + 0x000)) = 0x8080;
*((volatile uint16_t*)(FLASH_BASE + 0x000)) = 0x3030;
/* exit Non-volatile protection mode (90h/00h) */
*((volatile uint16_t*)(FLASH_BASE + 0x000)) = 0x9090;
*((volatile uint16_t*)(FLASH_BASE + 0x000)) = 0x0000;
}
void hal_flash_lock(void)
{
/* Enable all flash protection bits */
/* enter Non-volatile protection mode (C0h) */
*((volatile uint16_t*)(FLASH_BASE + 0xAAA)) = 0xAAAA;
*((volatile uint16_t*)(FLASH_BASE + 0x554)) = 0x5555;
*((volatile uint16_t*)(FLASH_BASE + 0xAAA)) = 0xC0C0;
/* set all protection bit (A0h/00h) */
*((volatile uint16_t*)(FLASH_BASE + 0x000)) = 0xA0A0;
*((volatile uint16_t*)(FLASH_BASE + 0x000)) = 0x0000;
/* exit Non-volatile protection mode (90h/00h) */
*((volatile uint16_t*)(FLASH_BASE + 0x000)) = 0x9090;
*((volatile uint16_t*)(FLASH_BASE + 0x000)) = 0x0000;
}
void hal_prepare_boot(void)
{
}
#ifdef MMU
void* hal_get_dts_address(void)
{
return (void*)WOLFBOOT_DTS_BOOT_ADDRESS;
}
#endif
Reference in New Issue View Git Blame Copy Permalink