#!/bin/sh

# scp local test

no_pid=-1
server_pid=$no_pid
ready_file=`pwd`/wolfssh_scp_ready$$
counter=0

[ ! -x ./examples/scpclient/wolfscp ] && echo -e "\n\nwolfscp client doesn't exist" && exit 1

# test for nonblocking only - wolfscp does not support -N flag for non-blocking
# mode, so we must skip when TEST_BLOCK is enabled
./examples/client/client -h | grep WOLFSSH_TEST_BLOCK
if [ $? -eq 0 ]
then
    echo "WOLFSSH_TEST_BLOCK detected"
    echo "wolfscp client does not support non-blocking mode, skipping test"
    exit 77
fi

create_port() {
    while [ ! -s "$ready_file" ] && [ "$counter" -lt 20 ]; do
        echo -e "waiting for ready file..."
        sleep 0.1
        counter=$((counter+ 1))
    done

    if test -e $ready_file; then
        echo -e "found ready file, starting client..."

        # get created port 0 ephemeral port
        port=`cat $ready_file`
    else
        echo -e "NO ready file ending test..."
        do_cleanup
        exit 1
    fi
}

remove_ready_file() {
    if test -e $ready_file; then
        echo -e "removing existing ready file"
    rm $ready_file
    fi
}

do_cleanup() {
    echo "in cleanup"

    if  [ $server_pid != $no_pid ]
    then
        echo "killing server"
        kill -9 $server_pid
    fi
    remove_ready_file
    # remove symlink-test artifacts so an early exit (e.g. create_port failure)
    # does not leave a planted secret/symlink behind in the source tree
    [ -n "$scp_secret" ] && rm -f "$scp_secret" "$scp_symlink" "$scp_symlink_out"
}

do_trap() {
    echo "got trap"
    do_cleanup
    exit -1
}

trap do_trap INT TERM

[ ! -x ./examples/scpclient/wolfscp ] && echo -e "\n\nClient doesn't exist" && exit 1

echo "Test basic copy from server to local"
./examples/echoserver/echoserver -1 -R $ready_file &
server_pid=$!
create_port
./examples/scpclient/wolfscp -u jill -P upthehill -p $port -S $PWD/scripts/scp.test:$PWD/scp.test
RESULT=$?
remove_ready_file

if test -e $PWD/scp.test; then
    rm $PWD/scp.test
else
    echo -e "\n\nfailed to get file"
    do_cleanup
    exit 1
fi

echo "Test basic copy from local to server"
./examples/echoserver/echoserver -1 -R $ready_file &
server_pid=$!
create_port
./examples/scpclient/wolfscp -u jill -P upthehill -p $port -L $PWD/scripts/scp.test:$PWD/scp.test
RESULT=$?
remove_ready_file

if test -e $PWD/scp.test; then
    rm $PWD/scp.test
else
    echo -e "\n\nfailed to send file"
    do_cleanup
    exit 1
fi

echo "Test of getting empty file"
touch $PWD/scripts/empty
./examples/echoserver/echoserver -1 -R $ready_file &
server_pid=$!
create_port
./examples/scpclient/wolfscp -u jill -P upthehill -p $port -S $PWD/scripts/empty:$PWD/empty
RESULT=$?
remove_ready_file
rm -f $PWD/scripts/empty

if test -e $PWD/empty ; then
    rm $PWD/empty
else
    echo -e "\n\nfailed to get empty file"
    do_cleanup
    exit 1
fi

echo "Test of sending empty file"
touch $PWD/scripts/empty
./examples/echoserver/echoserver -1 -R $ready_file &
server_pid=$!
create_port
./examples/scpclient/wolfscp -u jill -P upthehill -p $port -L $PWD/scripts/empty:$PWD/empty
RESULT=$?
remove_ready_file
rm -f $PWD/scripts/empty

if test -e $PWD/empty ; then
    rm $PWD/empty
else
    echo -e "\n\nfailed to send empty file"
    do_cleanup
    exit 1
fi

echo "Test of sending a file that does not exist"
touch $PWD/scripts/empty
./examples/echoserver/echoserver -1 -R $ready_file &
server_pid=$!
create_port
./examples/scpclient/wolfscp -u jill -P upthehill -p $port -L $PWD/does-not-exist:$PWD/empty
RESULT=$?
remove_ready_file
rm -f $PWD/scripts/empty

if test $RESULT -eq 0; then
    echo -e "\n\nshould fail out sending a file that does not exist"
    do_cleanup
    exit 1
fi

# The symlink-rejection guard is compiled out by WOLFSSH_NO_SYMLINK_CHECK, which
# the example client reports in its usage output (-?).  Skip this test when it is
# set: the server then follows symlinks by design and the check below would
# false-fail.
./examples/client/client '-?' | grep WOLFSSH_NO_SYMLINK_CHECK
if [ $? -eq 0 ]; then
    echo "symlink checking disabled, skipping symlink test"
else
    echo "Test that the server refuses to follow a symlink (server to local)"
    # This exercises the single-file send path (WOLFSSH_SCP_SINGLE_FILE_REQUEST),
    # whose file open now goes through wFopenNoFollow (atomic O_NOFOLLOW on
    # POSIX), so this case drives the no-follow open end to end.
    # The recursive sinks (the recursive-root leaf check and the per-entry check
    # in ScpProcessEntry) use the same shared wIsSymlink helper but cannot be
    # driven from here: the wolfSSH example client (wolfSSH_SCP_from) only ever
    # issues "scp -f <path>", never "scp -f -r", so the server's recursive
    # request state is never reached by this harness.  wIsSymlink itself is
    # additionally exercised through the SFTP confinement unit test
    # (test_wolfSSH_SFTP_Confinement), so the detection logic shared by all sinks
    # is covered even though the SCP recursive wiring is not driven e2e.
    scp_secret=$PWD/scripts/scp_secret_$$
    scp_symlink=$PWD/scp_symlink_$$
    scp_symlink_out=$PWD/scp_symlink_out_$$
    echo "TOP SECRET SYMLINK TARGET" > $scp_secret
    # A symlink whose target exists would, without the fix, be opened and its
    # contents streamed to the client. The fix must reject it instead.
    ln -s $scp_secret $scp_symlink
    if test -L $scp_symlink; then
        ./examples/echoserver/echoserver -1 -R $ready_file &
        server_pid=$!
        create_port
        ./examples/scpclient/wolfscp -u jill -P upthehill -p $port -S $scp_symlink:$scp_symlink_out
        remove_ready_file

        # The server must not deliver the symlink target: no local output file
        # may be produced from the refused request. The client exit code is not
        # asserted (as with the other -S cases it does not propagate a
        # server-side SCP abort); connectivity in this environment is already
        # proven by the "basic copy from server to local" case above, which uses
        # the same mechanism and aborts the whole script on failure, so this
        # cannot pass vacuously.
        if test -e $scp_symlink_out; then
            rm -f $scp_symlink_out $scp_secret $scp_symlink
            echo -e "\n\nserver followed a symlink, confinement bypass"
            do_cleanup
            exit 1
        fi
    else
        echo "symlink not supported on this filesystem, skipping symlink test"
    fi
    rm -f $scp_secret $scp_symlink $scp_symlink_out
fi

echo -e "\nALL Tests Passed"

exit 0