wolfssh/scripts/openssh-interop.test

#!/bin/sh

# OpenSSH interop test for strict key exchange, the Terrapin mitigation
# (CVE-2023-48795).
#
# Part 1 puts the OpenSSH client on the wolfSSH echoserver, part 2 the
# wolfSSH example client on OpenSSH's sshd. Each one checks that the marker
# is negotiated and that a session then runs over the connection: the
# mitigation zeroes the packet sequence numbers at SSH_MSG_NEWKEYS, and a
# peer that disagreed about the counters would fail the first packet that
# had to authenticate.
#
# Part 1b reuses the OpenSSH client on the echoserver to forward ssh-agent
# through it.
#
# Part 3 has the wolfSSH client authenticate to sshd with an RSA key held
# by OpenSSH's ssh-agent. The client has only the public half; the agent
# makes the signature.
#
# The checks read OpenSSH's own debug output, so they are worded the way
# OpenSSH words them. Strict KEX arrived in OpenSSH 9.6; anything older is
# skipped.

no_pid=-1
server_pid=$no_pid
sshd_pid=$no_pid
agent_pid=$no_pid
work_dir="`pwd`/openssh_interop_test$$"
ready_file="$work_dir/ready"
client_out="$work_dir/client.out"
client_log="$work_dir/client.log"
sshd_log="$work_dir/sshd.log"
port=0
counter=0
# What the echo session sends and expects back.
probe="strictkexprobe$$"
# Seconds any one connection is given before it is killed. Nothing here
# takes more than a moment; the limit only keeps a stuck session from
# hanging make check.
run_limit=60
killer_pid=-1
# The test keys are not copied into the build directory, so reach them
# through srcdir the way scripts/fwd.test does, or an out-of-tree build
# and make distcheck cannot find them. Made absolute because the example
# client chdirs up to the tree root before it opens the -i and -j files.
keys_dir=`cd "${srcdir:-.}/keys" && pwd` || exit 1

do_cleanup() {
    if [ $killer_pid != $no_pid ]
    then
        kill $killer_pid 2>/dev/null
        killer_pid=$no_pid
    fi
    if [ $sshd_pid != $no_pid ]
    then
        kill -9 $sshd_pid 2>/dev/null
        sshd_pid=$no_pid
    fi
    if [ $server_pid != $no_pid ]
    then
        kill -9 $server_pid 2>/dev/null
        server_pid=$no_pid
    fi
    if [ $agent_pid != $no_pid ]
    then
        kill $agent_pid 2>/dev/null
        agent_pid=$no_pid
    fi
    rm -rf -- "$work_dir"
}

do_trap() {
    echo "got trap"
    do_cleanup
    exit 1
}

trap do_trap INT TERM
# sshd holds a fixed port, so clean up on the way out however that happens.
trap do_cleanup EXIT

# Wait for a backgrounded command, killing it if it outstays the limit.
# timeout(1) is GNU coreutils and is on neither stock macOS nor the BSDs,
# so the watchdog is run here, the way scripts/sshclient.test does it.
# Polls rather than sleeping the whole limit: killing a subshell that is
# waiting on a sleep leaves the sleep running.
wait_with_limit() {
    watched_pid=$1

    (
        watched=0
        while kill -0 $watched_pid 2>/dev/null; do
            if [ $watched -ge $run_limit ]; then
                kill -9 $watched_pid 2>/dev/null
                break
            fi
            sleep 1
            watched=$((watched + 1))
        done
    ) 2>/dev/null &
    killer_pid=$!

    wait $watched_pid
    watched_status=$?

    kill $killer_pid 2>/dev/null
    killer_pid=$no_pid

    return $watched_status
}

fail() {
    printf '\n\n%s\n' "$1"
    do_cleanup
    exit 1
}

# Set WOLFSSH_TEST_REQUIRE_OPENSSH=1 where every part must run, as in CI;
# each skip below is then a failure.
require_openssh=${WOLFSSH_TEST_REQUIRE_OPENSSH:-0}

skip() {
    if [ "$require_openssh" = "1" ]; then
        fail "$1; WOLFSSH_TEST_REQUIRE_OPENSSH=1 does not allow skipping"
    fi
    printf '%s, skipping\n' "$1"
    rm -rf -- "$work_dir"
    exit 77
}

# Skip the part named by $2, keeping the parts that already passed.
skip_rest() {
    if [ "$require_openssh" = "1" ]; then
        fail "$1; WOLFSSH_TEST_REQUIRE_OPENSSH=1 does not allow skipping $2"
    fi
    echo "$1, skipping $2"
    do_cleanup
    exit 0
}

command -v ssh > /dev/null 2>&1 || skip "no ssh in the path"

ssh_version=`ssh -V 2>&1`
case "$ssh_version" in
    OpenSSH_*) ;;
    *) skip "ssh is not OpenSSH ($ssh_version)" ;;
esac

# 0 when the OpenSSH_X.Y in $1 is 9.6 or newer, 1 when it is older, and 2
# when there is no version to read. Strict KEX arrived in 9.6.
has_strict_kex() {
    hsk_major=`echo "$1" | sed -n 's/.*OpenSSH_\([0-9][0-9]*\)\..*/\1/p'`
    hsk_minor=`echo "$1" | \
        sed -n 's/.*OpenSSH_[0-9][0-9]*\.\([0-9][0-9]*\).*/\1/p'`

    [ -z "$hsk_major" ] && return 2
    [ -z "$hsk_minor" ] && hsk_minor=0

    if [ "$hsk_major" -lt 9 ] ||
        { [ "$hsk_major" -eq 9 ] && [ "$hsk_minor" -lt 6 ]; }
    then
        return 1
    fi

    return 0
}

has_strict_kex "$ssh_version"
case $? in
    1) skip "$ssh_version predates strict KEX" ;;
    2) skip "can't read the OpenSSH version ($ssh_version)" ;;
esac

[ ! -x ./examples/echoserver/echoserver ] && skip "echoserver doesn't exist"
./examples/echoserver/echoserver '-?' 2>&1 | grep -q "^echoserver " \
    || skip "echoserver doesn't run"

mkdir -p "$work_dir" || exit 1

# The echoserver is one shot, so start a new one per connection. It picks
# an ephemeral port and writes it to the ready file.
#
# -f keeps it in echo mode; without it a build with shell support tries to
# fork a login shell for a user who doesn't exist on this machine. Any
# argument given here is passed along, which is how the ECC sample key set
# is selected.
start_echoserver() {
    if [ $server_pid != $no_pid ]
    then
        kill -9 $server_pid 2>/dev/null
        wait $server_pid 2>/dev/null
        server_pid=$no_pid
    fi

    rm -f "$ready_file"
    ./examples/echoserver/echoserver -1 -f "$@" -R "$ready_file" \
        > "$work_dir/server.log" 2>&1 &
    server_pid=$!

    counter=0
    while [ ! -s "$ready_file" ] && [ "$counter" -lt 100 ]; do
        sleep 0.1
        counter=$((counter + 1))
    done

    [ ! -s "$ready_file" ] && fail "NO ready file, the echoserver never came up"

    port=`cat "$ready_file"`
}

# Run one echo session with the OpenSSH client.
#
# $1 - the private key to authenticate with, in a form OpenSSH reads
# rest  - extra echoserver arguments
#
# The key is copied because OpenSSH refuses one that is readable by anyone
# else, and the checked-in keys are group and world readable. The 0x03 in
# the input is what tells the echoserver's worker the session is over; the
# newline before it is the line the server echoes back.
run_openssh_client() {
    key_file=$1
    shift

    rm -f "$client_out" "$client_log"
    cp "$key_file" "$work_dir/id" || fail "couldn't copy $key_file"
    chmod 600 "$work_dir/id"

    start_echoserver "$@"

    printf '%s\n\003' "$probe" | \
        ssh -vvv -T -p $port \
            -o StrictHostKeyChecking=no \
            -o UserKnownHostsFile=/dev/null \
            -o IdentitiesOnly=yes \
            -o PreferredAuthentications=publickey \
            -i "$work_dir/id" hansel@127.0.0.1 \
            > "$client_out" 2> "$client_log" &
    wait_with_limit $!
}

echo "Test the OpenSSH client against the wolfSSH echoserver"

# -e switches the echoserver to its ECC sample keys. A build without ECDSA
# has only the RSA set, so fall back to that rather than call it a failure.
# A build with neither has only Ed25519, and the checked-in Ed25519 key is
# PKCS#8, which an OpenSSH on LibreSSL won't load, so make a key of
# OpenSSH's own and hand the echoserver its public half.
# Which of the attempts below opened the session, so the agent forwarding
# check can repeat it.
echo_keys=ecc
run_openssh_client "$keys_dir/hansel-key-ecc.pem" -e
session_status=$?
if [ $session_status -ne 0 ]; then
    echo "the ECC attempt failed, retrying with the RSA sample key"
    echo_keys=rsa
    run_openssh_client "$keys_dir/hansel-key-rsa.pem"
    session_status=$?
fi
if [ $session_status -ne 0 ] && command -v ssh-keygen > /dev/null 2>&1; then
    echo "the RSA attempt failed, retrying with an Ed25519 key"
    echo_keys=ed25519
    ssh-keygen -q -t ed25519 -N '' -C hansel -f "$work_dir/ed25519" \
        < /dev/null || fail "couldn't make an Ed25519 client key"
    run_openssh_client "$work_dir/ed25519" -j "$work_dir/ed25519.pub"
    session_status=$?
fi
if [ $session_status -ne 0 ]; then
    cat "$client_log"
    fail "couldn't open a session"
fi

# What the echoserver put in its KEXINIT. Both spellings go out; this is
# the one deployed OpenSSH matches on.
grep -q 'kex-strict-s-v00@openssh.com' "$client_log" \
    || fail "the echoserver didn't offer the strict KEX marker"

# And what OpenSSH decided to do about it.
grep -qi 'strict KEX ordering' "$client_log" \
    || fail "the OpenSSH client didn't turn strict KEX on"

grep -q "$probe" "$client_out" \
    || fail "the echoserver's reply didn't make it back"

# OpenSSH logs each reset as it happens. Informational: it is the one check
# here that a reworded debug line would break, and the round trip above
# already proves the two ends agree on the sequence numbers.
if grep -q 'resetting read seqnr' "$client_log"; then
    echo "the OpenSSH client reset its inbound sequence number"
else
    echo "note: no sequence number reset in the client log"
fi

echo "the OpenSSH client negotiated strict KEX with the echoserver"

# Part 1b forwards OpenSSH's ssh-agent through the echoserver. A local agent
# client on the echoserver's side lists the forwarded key over the socket
# the echoserver made for it, twice, so the second goes through a fresh
# accept. The socket's directory must be private and gone once the session
# is over.
if ! ./apps/wolfssh-options 2>/dev/null | grep -qx 'AGENT'; then
    echo "the echoserver has no agent support, skipping agent forwarding"
elif ! command -v ssh-agent > /dev/null 2>&1 ||
    ! command -v ssh-add > /dev/null 2>&1 ||
    ! command -v ssh-keygen > /dev/null 2>&1 ||
    ! command -v mkfifo > /dev/null 2>&1; then
    echo "no ssh-agent, ssh-add, ssh-keygen or mkfifo," \
        "skipping agent forwarding"
else
    echo "Test agent forwarding through the wolfSSH echoserver"

    # The agent picks its own socket path; see Part 3.
    SSH_AGENT_PID=
    eval `ssh-agent -s` > /dev/null
    [ -n "$SSH_AGENT_PID" ] || fail "couldn't start ssh-agent"
    agent_pid=$SSH_AGENT_PID

    ssh-keygen -q -t ed25519 -N '' -C wolfssh-agent-fwd \
        -f "$work_dir/agent-fwd" < /dev/null \
        || fail "couldn't make a key for the agent"
    ssh-add -q "$work_dir/agent-fwd" 2>/dev/null \
        || fail "couldn't add the key to ssh-agent"
    # Long comments push the list reply past the echoserver's relay
    # buffer, so it has to be drained in more than one read.
    agent_pad=`printf '%1500s' '' | tr ' ' x`
    for pad in 1 2 3 4; do
        ssh-keygen -q -t ed25519 -N '' -C "wolfssh-agent-pad$pad-$agent_pad" \
            -f "$work_dir/agent-pad$pad" < /dev/null \
            || fail "couldn't make a padding key for the agent"
        ssh-add -q "$work_dir/agent-pad$pad" 2>/dev/null \
            || fail "couldn't add a padding key to ssh-agent"
    done

    # The client key was copied to $work_dir/id by the attempt that worked.
    case $echo_keys in
        ecc) start_echoserver -e ;;
        rsa) start_echoserver ;;
        *) start_echoserver -j "$work_dir/ed25519.pub" ;;
    esac

    # The session stays open while the agent is used through it.
    rm -f "$work_dir/fwd_in" "$client_out" "$client_log"
    mkfifo "$work_dir/fwd_in" || fail "couldn't make a fifo"
    ssh -A -T -p $port \
        -o StrictHostKeyChecking=no \
        -o UserKnownHostsFile=/dev/null \
        -o IdentitiesOnly=yes \
        -o PreferredAuthentications=publickey \
        -i "$work_dir/id" hansel@127.0.0.1 \
        < "$work_dir/fwd_in" > "$client_out" 2> "$client_log" &
    fwd_ssh_pid=$!
    exec 3> "$work_dir/fwd_in"
    printf '%s\n' "$probe" >&3

    fwd_sock=
    counter=0
    while [ -z "$fwd_sock" ] && [ "$counter" -lt 100 ]; do
        fwd_sock=`sed -n 's/^Agent socket: //p' "$work_dir/server.log"`
        [ -z "$fwd_sock" ] && sleep 0.1
        counter=$((counter + 1))
    done
    if [ -z "$fwd_sock" ]; then
        exec 3>&-
        cat "$work_dir/server.log"
        fail "the echoserver never opened an agent socket"
    fi
    fwd_dir=`dirname "$fwd_sock"`

    case `ls -ld "$fwd_dir"` in
        drwx------*) ;;
        *) exec 3>&-; fail "the agent socket's directory is not private" ;;
    esac

    for attempt in 1 2; do
        SSH_AUTH_SOCK="$fwd_sock" ssh-add -l > "$work_dir/fwd_list" 2>&1 &
        wait_with_limit $!
        if ! grep -q 'wolfssh-agent-fwd' "$work_dir/fwd_list" ||
            [ `grep -c 'wolfssh-agent-pad' "$work_dir/fwd_list"` -ne 4 ]; then
            exec 3>&-
            cat "$work_dir/fwd_list"
            fail "the forwarded agent didn't list its keys (try $attempt)"
        fi
    done

    printf '\003' >&3
    exec 3>&-
    wait_with_limit $fwd_ssh_pid
    wait_with_limit $server_pid
    server_pid=$no_pid

    grep -q "$probe" "$client_out" \
        || fail "the session didn't survive the forwarded agent"
    [ -e "$fwd_dir" ] && fail "the echoserver left $fwd_dir behind"

    kill $agent_pid 2>/dev/null
    agent_pid=$no_pid

    echo "the forwarded agent answered through the echoserver"
fi

# Part 2 needs an sshd to talk to, and a host key to give it. Neither is
# worth failing the test over.
sshd_bin=
for candidate in /usr/sbin/sshd /usr/local/sbin/sshd /opt/homebrew/sbin/sshd
do
    [ -x "$candidate" ] && sshd_bin="$candidate" && break
done
if [ -z "$sshd_bin" ]; then
    sshd_bin=`command -v sshd 2>/dev/null`
fi

if [ -z "$sshd_bin" ] || [ ! -x "$sshd_bin" ]; then
    skip_rest "no sshd on this machine" "the wolfSSH client half"
fi
if ! command -v ssh-keygen > /dev/null 2>&1; then
    skip_rest "no ssh-keygen" "the wolfSSH client half"
fi
if [ ! -x ./examples/client/client ]; then
    skip_rest "the example client wasn't built" "the wolfSSH client half"
fi

echo "Test the wolfSSH client against OpenSSH's sshd"

# RSA and Ed25519 host keys beside the ECDSA one, for a build without
# ECDSA. A build with neither ECDSA nor Ed25519 can verify only RSA.
ssh-keygen -q -t ecdsa -N '' -f "$work_dir/hostkey" < /dev/null \
    || fail "couldn't make a host key for sshd"
ssh-keygen -q -t rsa -b 3072 -N '' -f "$work_dir/hostkey-rsa" < /dev/null \
    || fail "couldn't make an RSA host key for sshd"
ssh-keygen -q -t ed25519 -N '' -f "$work_dir/hostkey-ed25519" < /dev/null \
    || fail "couldn't make an Ed25519 host key for sshd"

# sshd takes a fixed port, so try a few. -f /dev/null keeps the machine's
# own sshd_config out of it, and -ddd both raises the log level and keeps
# sshd in the foreground for one connection. ForceCommand stands in for the
# user's login shell: the client exits with the session's exit status, and
# whatever the user's dotfiles leave behind is not this test's business.
# Arguments after the port are passed to sshd.
start_sshd() {
    sshd_listen_port=$1
    shift
    rm -f "$sshd_log"
    "$sshd_bin" -ddd -f /dev/null -p "$sshd_listen_port" \
        -h "$work_dir/hostkey" \
        -h "$work_dir/hostkey-rsa" -h "$work_dir/hostkey-ed25519" \
        -o "ListenAddress=127.0.0.1" \
        -o "AuthorizedKeysFile=$work_dir/authorized_keys" \
        -o "StrictModes=no" \
        -o "PasswordAuthentication=no" \
        -o "ForceCommand=true" \
        -o "PidFile=none" "$@" > "$sshd_log" 2>&1 &
    sshd_pid=$!

    # Its own counter: the loop that calls this one is counting too. A
    # failed bind is checked for as well as a good one -- sshd carries on
    # after one address fails, so "Server listening" alone does not mean
    # the port the client dials is answering.
    sshd_wait=0
    while [ "$sshd_wait" -lt 100 ]; do
        grep -q 'failed: Address already in use' "$sshd_log" 2>/dev/null \
            && return 1
        grep -q 'Server listening on' "$sshd_log" 2>/dev/null && return 0
        kill -0 $sshd_pid 2>/dev/null || return 1
        sleep 0.1
        sshd_wait=$((sshd_wait + 1))
    done

    return 1
}

sshd_port=0
candidate_port=$((22500 + ($$ % 1000)))
counter=0
while [ "$counter" -lt 5 ]; do
    if start_sshd $candidate_port; then
        sshd_port=$candidate_port
        break
    fi
    kill -9 $sshd_pid 2>/dev/null
    sshd_pid=$no_pid
    candidate_port=$((candidate_port + 1))
    counter=$((counter + 1))
done

if [ "$sshd_port" -eq 0 ]; then
    [ -s "$sshd_log" ] && tail -n 5 "$sshd_log"
    skip_rest "sshd wouldn't start here" "the wolfSSH client half"
fi

# The version gate above covered the client. This sshd was found on its own
# and can be the older vendor one while a newer ssh sits earlier in PATH, so
# read what it says about itself before asking it for a marker it has never
# heard of.
sshd_version=`sed -n 's/.*sshd version \(OpenSSH_[^,]*\).*/\1/p' \
    "$sshd_log" | head -n 1`
has_strict_kex "$sshd_version"
if [ $? -ne 0 ]; then
    skip_rest \
        "$sshd_bin is ${sshd_version:-an unreadable version}, no strict KEX" \
        "the wolfSSH client half"
fi

# sshd authenticates the user running this test, with one of the canned
# client keys put in an authorized_keys file of its own.
login_user=${USER:-`id -un`}
[ -z "$login_user" ] && fail "couldn't work out who is running this"

run_wolfssh_client() {
    cat "$2" > "$work_dir/authorized_keys" \
        || fail "couldn't write the authorized_keys file"
    chmod 600 "$work_dir/authorized_keys"

    # -x stops once the session is up: the KEX and the user auth are what
    # this half is about, and the echo path was covered above. stdin is
    # closed because the client prompts for a password when publickey is
    # refused, and a prompt with nothing behind it hangs the run.
    HOME="$work_dir" ./examples/client/client \
        -h 127.0.0.1 -p $sshd_port -u "$login_user" -i "$1" -j "$2" -x \
        < /dev/null > "$client_out" 2>&1 &
    wait_with_limit $!
}

# sshd handles one connection per -d run, so it needs restarting between
# attempts. Wait for the old one to go first, or the restart races it for
# the port. Any arguments are passed to sshd.
restart_sshd() {
    kill -9 $sshd_pid 2>/dev/null
    wait $sshd_pid 2>/dev/null
    sshd_pid=$no_pid
    start_sshd $sshd_port "$@" || fail "couldn't restart sshd"
}

run_wolfssh_client "$keys_dir/hansel-key-ecc.der" \
        "$keys_dir/hansel-key-ecc.pub"
if [ $? -ne 0 ]; then
    echo "the ECC attempt failed, retrying with the RSA client key"
    restart_sshd
    run_wolfssh_client "$keys_dir/hansel-key-rsa.der" \
        "$keys_dir/hansel-key-rsa.pub"
fi
if [ $? -ne 0 ]; then
    echo "the RSA attempt failed, retrying with the Ed25519 client key"
    restart_sshd
    run_wolfssh_client "$keys_dir/hansel-key-ed25519.der" \
        "$keys_dir/hansel-key-ed25519.pub"
fi
if [ $? -ne 0 ]; then
    cat "$client_out"
    tail -n 20 "$sshd_log"
    fail "the wolfSSH client couldn't connect to sshd"
fi

# Give sshd a moment to finish writing its side of the session.
counter=0
while [ "$counter" -lt 50 ]; do
    grep -q 'Accepted publickey' "$sshd_log" 2>/dev/null && break
    sleep 0.1
    counter=$((counter + 1))
done

grep -q 'kex-strict-c-v00@openssh.com' "$sshd_log" \
    || fail "the wolfSSH client didn't offer the strict KEX marker"

grep -qi 'strict KEX ordering' "$sshd_log" \
    || fail "sshd didn't turn strict KEX on"

grep -q 'Accepted publickey' "$sshd_log" \
    || fail "sshd never authenticated the wolfSSH client"

if grep -q 'resetting send seqnr' "$sshd_log"; then
    echo "sshd reset its outbound sequence number"
else
    echo "note: no sequence number reset in the sshd log"
fi

echo "the wolfSSH client negotiated strict KEX with sshd"

# Part 3 needs the client's agent support and OpenSSH's agent tools.
if ! ./examples/client/client '-?' 2>&1 | grep -q 'SSH-AGENT'; then
    skip_rest "the example client has no agent support" "the agent half"
fi
if ! command -v ssh-agent > /dev/null 2>&1 ||
    ! command -v ssh-add > /dev/null 2>&1; then
    skip_rest "no ssh-agent or ssh-add" "the agent half"
fi

# The RSA signature algorithms this client was built with; -E lists them
# without connecting.
agent_rsa_algs=
for alg in rsa-sha2-256 rsa-sha2-512; do
    if ./examples/client/client -E -u x 2>&1 | grep -q ": $alg\$"; then
        agent_rsa_algs="$agent_rsa_algs $alg"
    fi
done
if [ -z "$agent_rsa_algs" ]; then
    skip_rest "the client has no rsa-sha2 algorithms" "the agent half"
fi

echo "Test the wolfSSH client signing through ssh-agent for sshd"

# Run the client with only the public key $1, leaving the signature to the
# agent. $2 is the authorized_keys file sshd reads.
run_wolfssh_agent_client() {
    cat "$2" > "$work_dir/authorized_keys" \
        || fail "couldn't write the authorized_keys file"
    chmod 600 "$work_dir/authorized_keys"

    rm -f "$client_out"
    HOME="$work_dir" ./examples/client/client \
        -h 127.0.0.1 -p $sshd_port -u "$login_user" -a -j "$1" -x \
        < /dev/null > "$client_out" 2>&1 &
    wait_with_limit $!
}

# Check that the client, which exited with status $1, succeeded and that
# sshd accepted the agent's signature under pkalg $2, an extended regular
# expression.
check_agent_auth() {
    counter=0
    while [ "$counter" -lt 50 ]; do
        grep -q 'Accepted publickey' "$sshd_log" 2>/dev/null && break
        sleep 0.1
        counter=$((counter + 1))
    done

    if [ "$1" -ne 0 ] || ! grep -q 'Accepted publickey' "$sshd_log" ||
        ! grep -Eq "authenticated 1 pkalg ($2)( |\$)" "$sshd_log"; then
        cat "$client_out"
        tail -n 20 "$sshd_log"
        fail "the client didn't authenticate with $2 signed by ssh-agent"
    fi
}

# The agent picks its own socket path; one under work_dir can outgrow
# sun_path in a deep build directory.
SSH_AGENT_PID=
eval `ssh-agent -s` > /dev/null
[ -n "$SSH_AGENT_PID" ] || fail "couldn't start ssh-agent"
agent_pid=$SSH_AGENT_PID

# A key of ssh-keygen's default size, which the client doesn't have
# built in, so only the agent can sign for it.
ssh-keygen -q -t rsa -N '' -C wolfssh-agent -f "$work_dir/agent-rsa" \
    < /dev/null || fail "couldn't make an RSA client key"
ssh-add -q "$work_dir/agent-rsa" 2>/dev/null \
    || fail "couldn't add the RSA key to ssh-agent"

for alg in $agent_rsa_algs; do
    restart_sshd -o "PubkeyAcceptedAlgorithms=$alg"
    run_wolfssh_agent_client "$work_dir/agent-rsa.pub" \
        "$work_dir/agent-rsa.pub"
    check_agent_auth $? "$alg"
done

echo "ssh-agent signed the wolfSSH client's RSA user auth"

do_cleanup
echo "OpenSSH interop tests passed"
exit 0