51 lines
1.5 KiB
Plaintext
51 lines
1.5 KiB
Plaintext
# This file was generated using idf.py save-defconfig. It can be edited manually.
|
|
# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
|
|
#
|
|
CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE=y
|
|
CONFIG_COMPILER_STACK_CHECK_MODE_ALL=y
|
|
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=n
|
|
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=n
|
|
CONFIG_LWIP_IPV6=n
|
|
|
|
CONFIG_FREERTOS_HZ=1000
|
|
CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y
|
|
|
|
#
|
|
# Default main stack size
|
|
#
|
|
# This is typically way bigger than needed for stack size. See user_settings.h
|
|
#
|
|
CONFIG_ESP_MAIN_TASK_STACK_SIZE=55500
|
|
# Legacy stack size for older ESP-IDF versions
|
|
CONFIG_MAIN_TASK_STACK_SIZE=55500
|
|
|
|
#
|
|
# Compiler options
|
|
#
|
|
CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
|
|
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
|
|
CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
|
|
CONFIG_COMPILER_HIDE_PATHS_MACROS=y
|
|
CONFIG_COMPILER_STACK_CHECK_MODE_NORM=y
|
|
CONFIG_COMPILER_STACK_CHECK=y
|
|
|
|
#
|
|
# Partition Table
|
|
#
|
|
# CONFIG_PARTITION_TABLE_SINGLE_APP is not set
|
|
CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE=y
|
|
# CONFIG_PARTITION_TABLE_TWO_OTA is not set
|
|
# CONFIG_PARTITION_TABLE_CUSTOM is not set
|
|
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
|
|
CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp_large.csv"
|
|
CONFIG_PARTITION_TABLE_OFFSET=0x8000
|
|
CONFIG_PARTITION_TABLE_MD5=y
|
|
# end of Partition Table
|
|
|
|
|
|
CONFIG_FREERTOS_HZ=100
|
|
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=1
|
|
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=1
|
|
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0
|
|
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1
|