WolfSSL
/
wolfssl
mirror of https://github.com/wolfSSL/wolfssl.git
1
0
Fork 0
Code Issues Releases Wiki Activity

update tsip readme

pull/2486/head
Hideki Miyazaki 2019-09-29 16:58:24 +09:00
parent 43476e80d4
commit 5486b535d1
1 changed files with 19 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
wolfcrypt/src/port/Renesas/README_TSIP.md → wolfcrypt/src/port/Renesas/README.md
View File

@ -25,7 +25,8 @@ Note : The included example program is tested with [GR-ROSE](http://gadget.renes
## Setup and Build wolfSSL library
1. Uncomment out #define WOLFSSL_RENESAS_TSIP in /path/to/wolfssl/wolfssl/wolfcrypt/settings.h
Uncomment out #define WOLFSSL_RENESAS_RX65N in /path/to/wolfssl/wolfssl/wolfcrypt/settings.h
2. Open a project file at /path/to/wolfssl/IDE/Renesas/e2studio/Projects/wolfssl/ by e2studio and build to create wolfssl library
2. Open a project file at /path/to/wolfssl/IDE/Renesas/e2studio/Projects/wolfssl/ by e2studio and build to create wolfssl library
Note : Generating FIT module source files in advance are required to compile wolfSSL when enabling WOLFSSL_RENESAS_TSIP and WOLFSSL_RENESAS_RX65N. Please see for creating FIT module files at "Setup and Build and example program" in this readme below.
To disable portions of the hardware acceleration you can optionally define:
@ -99,7 +100,23 @@ These needed source files can be generated by creating a dummy project including
Change IP ADDRESS and PORT NUMBER in r_t4_rx_config.h
`#define T4_CFG_FIXED_IP_ADDRESS_CH0 192,168,1,33`
`#define T4_CFG_TCP_REPID1_PORT_NUMBER 11111`
Note: It would need to modify other configuration base on evaluation board.
Note: It would need to modify other configuration base on evaluation board.
When using GR-ROSE, you can choose "GR-ROSE" from "board" tab and "board" drop-down list and then is able to follow settings below:
Go to component tab and open r_ether_rx properties:
Ethernet interface : RMII
The register bus of PHY0 for ETHER0/1: Use ETHER0
Resource, ETHERC: Check ETHERC0_RMII
Go to component tab and open r_t4_rx properties:
Enable/Disable DHCP function : 0
IP address for ch0, when DHCP disable : 192,168,1,33
TCP REPID1 prot number : 11111
Go to pins tab and select ethernet controller
Check to use pins
3. Generate source code
Now, it is able to copy these FIT modules into an example project.
4. Make "smc_gen" folder under /path/to/wolfssl/IDE/Renesas/e2studio/Projects/test/src/