Impemented FIPS 204 (Draft) Module-Lattice-Based Signature Standard.
Implementation include making a key, signing and verification.
Make key API added.
Updated liboqs calls to use ML-DSA implementation instead of Dilithium.
Ignore protocol version being less than expected when received directly
after ClientHello.
Protocol version negotiation hasn't taken place and a lower version can
be sent to cover minimum supported protocol version.
1. Add API for importing an RSA private key, `wc_RsaPrivateKeyDecodeRaw()`,
when all you have are the components of the key in raw arrays. Also
recalculates dP and dQ if missing.
2. Add API test for `wc_RsaPrivateKeyDecodeRaw()`.
- Fix BIO_BIO type
- Set retry flags correctly
- Add CRL callback
- Copy the alt names instead of trying to share a pointer
- Allow calling wolfSSL_get_servername on client side (to get the requested name)
- Return the chain in wolfSSL_X509_STORE_CTX_get_chain in the correct order
- Peer first, top CA last
- Fix leak in RebuildFullName
- Add CopyString helper function
- Implement
- X509_CRL_dup
- ASN1_UTCTIME_set
- X509_STORE_CTX_get0_param
- X509_STORE_get0_param
- X509_STORE_set_verify_cb
- X509_STORE_set_get_crl
- X509_set1_notAfter
- X509_set1_notBefore
* added POSIX definitions for XFEOF(), XFERROR(), and XCLEARERR(), currently with no-op fallbacks for !POSIX.
* added missing file handle checks in testsuite/testsuite.c:file_test() and tests/utils.h:copy_file().
* added fixes and suppression around tests/api.c:test_wolfSSL_SMIME_read_PKCS7().
* added various fixes in examples/asn1/asn1.c and examples/pem/pem.c.
1. Add some expository comments describing the purpose of:
* WOLFMEM_MAX_BUCKETS
* WOLFMEM_DEF_BUCKETS
* WOLFMEM_BUCKETS
* WOLFMEM_DIST
2. Switch the API test for LoadStaticMemory() to named constants.
3. Delete redundant test case. Add a new test case.
4. In the wolfCrypt test for the memory constants, check the sizes of
the WOLFMEM_BUCKETS and WOLFMEM_DIST lists against
WOLFMEM_DEF_BUCKETS which should be their length. Check that
WOLFMEM_DEF_BUCKETS is not greater than WOLFMEM_MAX_BUCKETS.
5. Default for WOLFMEM_MAX_BUCKETS should be WOLFMEM_DEF_BUCKETS, set it
to what is specified. Add a warning if MAX is less than DEF.
6. Separate the definition of the constant LARGEST_MEM_BUCKET so it is
dependent on config and not if WOLFMEM_BUCKETS isn't set.
1. Add API for function `wc_UnloadStaticMemory()` which frees the mutex
used by the static memory pool.
2. Update the `wc_LoadStaticMemory_ex()` test to free the static memory
pool's mutex on each successful test case.
remove stray definitions of XTRANSFORM*() in wolfcrypt/src/sha512.c;
restore global intel_flags in the !WC_NO_INTERNAL_FUNCTION_POINTERS paths of sha256.c and sha512.c;
disable test_wolfSSL_dtls_compare_stateless() in tests/api.c when DEBUG_VECTOR_REGISTER_ACCESS_FUZZING (it depends on a stable SHA512 hash of the in-memory struct WOLFSSL image).
By default RPK (RFC7250) support is not enabled, but is enabled when
--enable-rpk, --enable-all or --enable-dist is used.
Makes use of the HAVE_RPK compile time option.
Fix clang issue reported in tests/api.c during test suites
Moved E[CD][25519||448] APIs to pk.c
Move public key PEM APIs to pk.c.
Move wolfSSL loading and using of private keys and certificates to
ssl_load.c
Move PKCS#7 and PKCS#12 APIs to ssl_p7p12.c.
Move session and session cache APIs to ssl_sess.c.
Other minor fixes.
TLS 1.0/1.1/1.2 specifications require the of a return a handshake
failure alert when no cipher suites match.
TLS 1.3 specification requires the return of a "handshake_failure" or
"insufficient_security" fatal alert.
Change alert sent from "illegal_parameter" to "handshake_failure".
fix clang-analyzer-deadcode.DeadStores in src/tls.c TLSX_ClientCertificateType_GetSize();
fix clang-analyzer-deadcode.DeadStores in tests/api.c test_tls13_rpk_handshake();
fix null pointer to XMEMCPY() in src/internal.c CopyDecodedName().
DTLS Server:
examples/server/server -v3 -u -s
DTLS Client:
examples/client/client -vd -g -u -s
TLS Server:
examples/server/server -v3 -s
TLS Client:
examples/client/client -vd -g -s
Support checking for DTLS1.2 Hello Verify Request when using PSK.
Unset options.tls1_3 when handling a DTLS1.2 Hello Verify Request.
Unset options.tls1_3 when handling a (D)TLS1.2 Server Hello to stop
checking of Encrypted Client Hello
Requires ./configure --enable-all --enable-dtls13
Add in tests for DTLS1.3 and TLS1.3 downgrade when using PSK.
wolfssl/wolfcrypt/wc_kyber.h: in definition of struct KyberKey, use correct type for devId;
wolfcrypt/src/wc_kyber_poly.c: numerous fixes for bugprone-macro-parentheses and readability-inconsistent-declaration-parameter-name;
tests/api.c: in test_tls13_apis(), add missing defined(HAVE_LIBOQS) gate on inclusion of ":P256_KYBER_LEVEL1" in groupList.
api.c: z and ret no longer only when !NO_ASN_TIME.
benchmark.c: rsaKey array type has changed and unusual code path needsed
updating.
cmac.c: Zeroization test failed when checkSz was zero as called function
didn't zero out cmac. checkSz is invalid.
test.c: rsaCaCertDerFile used even when NO_ASN_TIME.
test.h: --enable-sp-math only supports DH of 2048 bits and above. Change
default DH parameters to be 2048 bits.
wolfcrypt/test/test.c: fix gating for verify4 in scrypt_test(), and fix WOLFSSL_SMALL_STACK -Wframe-larger-than=2048 warnings in sha256_test() and sha512_test().
src/ssl.c: fix for true-but-benign nullPointerRedundantCheck in ProcessBufferTryDecodeEd25519().
tests/api.c: fix for -Wmaybe-uninitialized in test_wc_PKCS7_VerifySignedData_RSA() identified via cross-m68k-all-asm.
* fix overallocation in WC_DECLARE_ARRAY() macro in the !WOLFSSL_SMALL_STACK path.
* rename WC_INIT_ARRAY() to WC_ALLOC_ARRAY() for clarity (it doesn't initialize any memory).
* rename WC_DECLARE_ARRAY_DYNAMIC_DEC(), WC_DECLARE_ARRAY_DYNAMIC_EXE(), and WC_FREE_ARRAY_DYNAMIC() to WC_DECLARE_HEAP_ARRAY(), WC_ALLOC_HEAP_ARRAY(), and WC_FREE_HEAP_ARRAY(), respectively, also for clarity, and refactor out the duplicate definitions.
* add WC_ALLOC_VAR(), and move the XMALLOC() in smallstack WC_DECLARE_VAR() into it. smallstack WC_DECLARE_VAR() now initializes the pointer to NULL, like smallstack WC_DECLARE_ARRAY(), assuring all pointers are valid upon shortcircuit to cleanup for a failed allocation (see WC_ALLOC_DO_ON_FAILURE below).
* add a new hook "WC_ALLOC_DO_ON_FAILURE" in WC_ALLOC_VAR(), WC_ALLOC_ARRAY(), and WC_DECLARE_ARRAY_DYNAMIC_EXE(), which is invoked when an allocation fails. by default the hook is defined to WC_DO_NOTHING.
* add basic safety to WC_*_HEAP_ARRAY() by recording/detecting allocation state via idx##VAR_NAME.
* add macros WC_ARRAY_OK() and WC_HEAP_ARRAY_OK() to test if allocation succeeded.
* add macros WC_CALLOC_ARRAY() and WC_CALLOC_HEAP_ARRAY() which zero the objects.
* add macro WC_CALLOC_VAR() which zeros the object.
ED448: smallstack refactor of ge448_scalarmult_base().
src/tls.c tests/api.c wolfcrypt/test/test.c: update WC_DECLARE_VAR()s with now-required matching WC_ALLOC_VAR()s.
wolfcrypt/benchmark/benchmark.c:
* no functional changes in default error-free behavior.
* add definition of WC_ALLOC_DO_ON_FAILURE() that prints error message, sets ret, and does goto exit.
* add BENCH_NTIMES and BENCH_AGREETIMES overrideeable macros, to allow fast sanitizer runs and slow high-precision runs.
* smallstack refactor of all declarations of stack arrays of the form foo[BENCH_MAX_PENDING], using WC_DECLARE_ARRAY() (35 in all).
* additional smallstack refactors, using WC_DECLARE_VAR(), for bench_aesxts(), bench_ed448KeyGen(), bench_eccsi*(), and bench_sakke*().
* fixes for various unhandled error conditions around malloc failures.
wolfcrypt/test/test.c: opportunistically constify several (42) static constants, moving them to the readonly data segment.
linuxkm/Makefile: if ENABLED_LINUXKM_BENCHMARKS, add wolfcrypt/benchmark/benchmark.o to WOLFSSL_OBJ_FILES.
linuxkm/Kbuild: enable FPU for benchmark.o, and remove enablement for module_hooks.o.
linuxkm/module_hooks.c: remove inline include of benchmark.c.
- wc_ecc_shared_secret_ssh should either be declared or not. Having two different signatures for the same function is error prone.
- Don't use wc_ecc_shared_secret_ssh in our code. Use wc_ecc_shared_secret directly.
* tls: negotiate until hs is complete in wolfSSL_read/wolfSSL_write
Don't rely on ssl->options.handShakeSate == HANDSHAKE_DONE to check if
negotiation is needed. wolfSSL_Connect() or wolfSSL_Accept() job may not yet be
completed and/or some messages may be waiting in the buffer because of
non-blocking I/O.
* tests: test case for handshake with wolfSSL_read()/wolfSSL_write()
* doc: clarify wolfSSL_write()
* internal.c: rename: need_negotiate -> ssl_in_handshake
- dtls: check that the cookie secret is not emtpy
- Dtls13DoDowngrade -> Dtls13ClientDoDowngrade
- dtls: generate both 1.2 and 1.3 cookie secrets in case we downgrade
- dtls: setup sequence numbers for downgrade
- add dtls downgrade sequence number check test
Fixes ZD17314
Multiple handshake messages in one record will fail the MsgCheckBoundary() check on the client side when the client is set to TLS 1.3 but allows downgrading.
--> ClientHello
<-- ServerHello + rest of TLS 1.2 flight
Client returns OUT_OF_ORDER_E because in TLS 1.3 the ServerHello has to be the last message in a record. In TLS 1.2 the ServerHello can be in the same record as the rest of the server's first flight.
1. For Mach and FreeBsd builds, add the function link_file() which makes
a hard link for a file.
2. Add a macro STAGE_FILE that either calls copy_file or link_file
depending on doing a Mach or FreeBSD build or not.
This is to work around how the CRL Monitor is detecting file changes
made by the CRL monitor test in the testsuite. Linux and Windows are
detecting the file copies and deletes, and how macOS detects them.
kevent sees the link as a single change to the parent directory and
reads it. When you copy the file, kevent sees the new file getting
opened and triggering the file update.
1. Add missing assignment of the WOLFSSL object's ecdhCurveOid value. It
is set correctly in the previous cases, but got missed for ECDHE-PSK.
2. Add test cases to the unit testing.
tests/suites.c: in SuiteTest(), swap order of (void)s and return.
wolfcrypt/src/chacha.c: gate out unreachable C wc_Chacha_encrypt_bytes() call in wc_Chacha_Process, and gate out unused implementations of wc_Chacha_wordtobyte() and wc_Chacha_encrypt_bytes(), when defined(USE_INTEL_CHACHA_SPEEDUP).
wolfcrypt/src/sha256.c and wolfcrypt/src/sha512.c: fix logic in Sha256_SetTransform() and Sha512_SetTransform() to make the AVX1_RORX implementations accessible. also add a missing Transform_Sha512_Len_p = NULL in the C path of Sha512_SetTransform().
wolfssl/internal.h: for the fallback definition of wolfSSL_curve_is_disabled, use an inline function instead of a compound-clause macro, because clang isn't smart enough to treat the compound expression as a bare constant zero, producing a lame-positive -Wunreachable-code.
* in wolfssl/ssl.h, add missing arg names to wolfSSL_CTX_set_tlsext_use_srtp(), wolfSSL_set_tlsext_use_srtp(), and wolfSSL_export_dtls_srtp_keying_material();
* in wolfcrypt/src/kdf.c, call wc_AesFree if and only if wc_AesInit() succeeded;
* in src/ssl.c:DtlsSrtpSelProfiles(), fix bugprone-inc-dec-in-conditions;
* in tests/suites.c:execute_test_case(), fix several -Wdeclaration-after-statement and -Wmissing-field-initializers;
* in wolfcrypt/test/test.c, fix a shiftTooManyBitsSigned warning in srtpkdf_test(), and fix a typo (kaSz/ksSz).
We can omit either the CeritificateStatus message or the appropriate extension when we can not provide the OCSP staple that the peer is asking for. Let peer decide if it requires stapling and error out if we don't send it.
tests/api.c: modify test_wc_CmacFinal() to use wc_CmacFinalNoFree() except for the final call.
wolfcrypt/src/aes.c:
* fix wc_AesEaxEncryptAuth() and wc_AesEaxDecryptAuth() to call wc_AesEaxFree() only if wc_AesEaxInit() succeeded.
* fix wc_AesEaxInit() to free all resources on failure.
* revert wc_AesEaxEncryptFinal() and wc_AesEaxDecryptFinal() changes, then change wc_CmacFinal() calls in them to wc_CmacFinalNoFree() calls.
* wc_AesEaxFree(): add wc_CmacFree() calls.
* followup to https://github.com/wolfSSL/wolfssl/pull/7009 "20231128-misc-fixes" and https://github.com/wolfSSL/wolfssl/pull/7011 "Add missing wc_AesInit calls."
* adds WC_DEBUG_CIPHER_LIFECYCLE, which embeds asserts in low-level AES implementations for proper usage of wc_AesInit() and wc_AesFree().
* fixes native CMAC, AES-EAX, and AES-XTS implementations to assure resource release.
* adds missing wc_AesXtsInit() API, and adds a new wc_AesXtsSetKey_NoInit().
* fixes misspellings in EVP that unconditionally gated out AES-OFB and AES-XTS.
* fixes misspellings in EVP that unconditionally gated out AES-CBC and AES-CFB code in wolfSSL_EVP_CIPHER_CTX_cleanup_cipher().
* openssl compat AES low level cipher API has no counterpart to wc_AesFree(), so these compat APIs will now be gated out in configurations where they would otherwise leak memory or file descriptors (WOLFSSL_AFALG, WOLFSSL_DEVCRYPTO, WOLF_CRYPTO_CB, etc.). A new macro, WC_AESFREE_IS_MANDATORY, is defined in wolfcrypt/aes.h to streamline this dependency.
* fixes 40 missing EVP_CIPHER_CTX_cleanup()s and 11 wc_AesFree()s in src/ssl.c, src/ssl_crypto.c, tests/api.c, and wolfcrypt/test/test.c.
memcached support: add required functions/defines.
Fix running unit test when defining DEBUG_WOLFSSL_VERBOSE without OPENSSL_EXTRA.
Break out session_id_context APIs into separate option WOLFSSL_SESSION_ID_CTX, so they can be used without OPENSSL_EXTRA.
Make wolfSSL_ERR_get_error and wolfSSL_CTX_set_mode available for memcached.
Add --enable-memcached.
Include required defines for memcached.
Revert unit test fix, no longer needed.
Add Github actions test for memcached. Stop defining DEBUG_WOLFSSL_VERBOSE for memcached.
Add auto retry to writes.
Memcached CI: correct libevent package name.
Memcached CI: Add pkgconfig path for Github CI wolfSSL prefix.
memcached: Fix WOLFSSL_OP_NO_RENEGOTIATION going outside of int bounds, add LD_LIBRARY_PATH for memcached CI test.
memcached CI: Use correct path for wolfSSL
memcached: Add required perl dependency for SSL tests
memcached: Update to 1.6.22
memcached: actually test tls
memcached: Update wolfSSL_SSL_in_before to be side agnostic.
tests/api.c: when NO_SHA, omit test_wolfSSL_CertManagerCheckOCSPResponse() and test_wolfSSL_CheckOCSPResponse() (both use static artifacts with SHA1 name and key hashes).
This exercises the fragmenting of ClientHello via large post-quantum key share.
./configure --enable-dtls-mtu --enable-dtls-frag-ch --enable-dtls \
--enable-dtls13 --with-liboqs
- DTLS 1.3 pqc support
- Add --enable-dtls-frag-ch option to enable CH fragmenting
- Send an alert when we get an empty keyshare with a cookie present to not allow for multiple HRR in one connection
- Only update the DTLS window when we have successfully processed or stored a message
- Call ssl->chGoodCb as soon as we have processed a verified full or fragmented ClientHello cookie
- Regen CRL's as most of them are expired
- certs/crl/extra-crls/ca-int-cert-revoked.pem: CRL that revokes certs/intermediate/ca-int-cert.pem signed by certs/ca-cert.pem
- Add CheckCertCRL_ex API to not depend on DecodedCert
- CheckCertCRLList: accept raw serial or hashed version to work with Signers
- Add XELEM_CNT to simplify pre-proc element counting
- CheckCertCRLList: check all entries in case a single issuer has multiple CRL's loaded
- test_multiple_crls_same_issuer: testing two different certificates forcing the client to check both CRL's from the same issuer
- CRL_Entry
- use a lock instead of a mutex to allow multiple threads to access the same list simultaneously
- add a verifyMutex when doing verification so that we don't have to release the crlLock
- Add allocation and free functions for CRL_Entry
- DupCRL_Entry: simplify copying by copying all static fields in one memcpy
- Use unions for type punning in xor API
- Initialise potentially uninitialised variables
- Use `LL` suffix to specify a larger integer type
- Don't use `max` as it can shadow other definitions
Add support for compiling ASM for Thumb2
Add Curve25519 ASM for Thumb2
Limit assembly code compiled when Ed25519 not required.
Rework all assembly implementations to replace ge_*() functions instead
of having fe_ge_*() versions that take many parameters.
Get ARM32 inline asm working.
- wolfssl_ec_point_mul: fix parameters being passed into ec_mul2add
- Compile in compressed ecc key parsing for OPENSSLALL
- Improve debugging around compat layer ecc operations
- wolfSSL_BN_div: dv can be NULL
- Add spake like computation test
- Add CI krb5 testing
- Add timeouts to CI
tweak several #includes of settings.h to include types.h instead (all of these are for clarity, as types.h is indirectly included by later #includes), and add #include <wolfssl/wolfcrypt/types.h> where missing;
remove trailing semicolons from PRAGMA*() macro invocations as they are unneeded and can be harmful (inducing frivolous -Wdeclaration-after-statement etc.).
if ENABLED_LINUXKM_PIE, add -DWOLFSSL_NO_OCSP_ISSUER_CHECK to gate out backward dependency in asn.c;
if ENABLE_LINUXKM, don't error on FIPS without thread_ls_on;
for --enable-curl, set ENABLED_MD4="yes", and move --enable-md4 AC_ARG_ENABLE() clause up to a position adjacent to des3 handling;
scripts/sniffer-gen.sh: fix illegal exit code (SC2242);
src/internal.c: fix clang-analyzer-core.NonNullParamChecker in CreateTicket();
src/ocsp.c: fix readability-redundant-preprocessor;
src/tls.c: fix empty-body in TLSX_PskKeModes_Parse() and clang-diagnostic-unreachable-code-break in ALPN_Select();
tests/api.c: fix several clang-analyzer-core.NullDereference related to Expect*() refactor;
wolfcrypt/src/asn.c:
fix -Wconversions in DecodeAuthKeyId() and ParseCertRelative();
fix readability-redundant-declaration re GetCA() and GetCAByName();
gate inclusion of wolfssl/internal.h on !defined(WOLFCRYPT_ONLY);
wolfssl/internal.h: add macro-detection gating around GetCA() and GetCAByName() prototypes matching gates in wolfcrypt/src/asn.c;
tests/utils.c: in create_tmp_dir(), use one-arg variant of mkdir() if defined(__CYGWIN__) || defined(__MINGW32__).
Add support for cipher aliases DHE, EDH and EECDH.
Add define SSL_CTRL_GET_CHAIN_CERTS to help hitch and other programs detect SSL_CTX_get0_chain_certs is supported.
Add wolfSSL_get_locking_callback.
Allow using ECDHE+RSA cipher suites when ECDHE alias is used while in OpenSSL compatibility mode.
Add more alerts for hitch.
SSL_CM should use the CTX's x509_store_pt if available.
Add support for SSL_CERT_FILE and SSL_CERT_DIR. Load default OpenSSL TLS 1.3 ciphers when using OPENSSL_COMPATIBLE_DEFAULTS.
Use wolfSSL_sk_X509_new_null to allocate WOLFSSL_STACK in wolfSSL_CTX_get_extra_chain_certs. Previous approach of malloc'ing without setting type/memsetting was leading to a segfault.
Add --enable-hitch.
hitch: Add unit tests for new APIs, fix a couple of issues uncovered by unit testing.
Correct behavior of wolfSSL_BIO_set_mem_buf for BIO_CLOSE/NOCLOSE and update unit test accordingly.
Add Github action test for hitch.
Split out certificate manager APIs into ssl_certman.c.
ssl.c includes ssl_certman.c
Better test coverage.
Minor fixes.
wolfSSL_X509_chain_up_ref calls XFREE with name->heap but name may be
NULL. Check for NULL first.
- nginx: add necessary defines and function
- Implement Certificate Authorities for TLS 1.3
- Implement secret logging for TLS 1.3. Can be used for example with:
./configure CPPFLAGS="-DWOLFSSL_SSLKEYLOGFILE -DSHOW_SECRETS -DHAVE_SECRET_CALLBACK -DWOLFSSL_SSLKEYLOGFILE_OUTPUT='\"/tmp/secrets\"'"
- Implement session context checking for tickets
- Check for authorized responder in OCSP basic response
- Fix handling call to ocsp->statusCb
- compat: Translate SOCKET_PEER_CLOSED_E to WOLFSSL_ERROR_SYSCALL
- Fix wolfSSL_CTX_set_session_cache_mode
- WOLFSSL_SESS_CACHE_OFF means nothing should be on
- WOLFSSL_SESS_CACHE_NO_INTERNAL turns off only the internal cache
- Respect ssl->options.internalCacheOff
- Implement SSL_SESSION_set_time
- wolfSSL_SSL_in_init: fix detection for TLS 1.3
- Fix handling call to ssl->alpnSelect
- SendTls13NewSessionTicket: always generate new ID
- When we send a new ticket for the same session (for example we resumed a connection and are sending a new ticket so that the client can resume in the future), we need to generate a new ID so that we don't overwrite the old session in the cache. Overwriting the session results in the `diff` calculation in `DoClientTicketCheck()` producing the wrong value and failing to resume.
Add nginx github action test
- Fix memory leaks
- wolfSSL_OCSP_basic_verify: implement OCSP_TRUSTOTHER flag
- AKID: implement matching on issuer name and serial number
- ocsp: check for a chain match for OCSP responder
- Split CreateTicket into CreateTicket and SetupTicket
- SendCertificateStatus: free response.buffer
- Use heap hint when allocating responseBuffer
- Remove responseBuffer from internal API's that don't use it anywhere
Address PR comments + other cleanup
Addressing PR comments
Minor change
Make sure the last line gets output as well
Add in ARIA SHA256 session to internal structure
Add in ARIA SHA384 session to internal structure
Add necessary function for ARIA to extract key
Fix unit tests
Rename HAVE_ARIAGCM to HAVE_ARIA
Move aria.* to wolfcrypt/port/aria
Separate out aria-crypt init functions
Adding in ECC+SHA callbacks
Avoid using AC_CHECK_FILE
Rename Aria to wc_Aria
Don't need special cases
Addressing PR comments
Code cleanup
C89 support
Remove TODO
Add documentation about buffer size
Clean up header files
Use ARIA_DEVID by default if available
Dummy update call to make MagicCrypto happy
Fix for detecting what algo type to use
Documentation
Use the appropriate sign/verify
Collect MagicCrypto functions together (and avoid leaks)
Fall back on other implementations on failure
Fix issue when compiling without CRYPTOCB
Addressing PR comments
Better cleanup
Addressing PR comments
Cleaner exit in case of error
- move the testsuite file helps into a new tests/utils.c file so that they can be used across all tests
- dump the raw TLS stream when WOLFSSL_DUMP_MEMIO_STREAM is defined so that it can be examined in Wireshark
Add support for:
- SM2 elliptic curve and SM2 sign/verify
- SM3 digest
- SM4 cipher with modes ECB/CBC/CTR/GCM/CCM
Add APIs for SM3 and SM4.
Add SM2 sign and verify APIs.
Add support for SM3 in wc_Hash and wc_Hmac API.
Add support for SM3 and SM4 through EVP layer.
Add support for SM2-SM3 certificates. Support key ID and name hash being
with SHA-1/256 or SM3.
Add support for TLS 1.3 cipher suites: TLS-SM4-GCM-SM3, TLS-SM4-CCM-SM3
Add support for TLS 1.2 SM cipher suite: ECDHE-ECDSA-SM4-CBC-SM3
Add support for SM3 in wc_PRF_TLS.
Add SM2-SM3 certificates and keys. Generated with GmSSL-3.0.0 and
OpenSSL.
Importing an EC point ordinate with one being zero will result in
different errors based on different implementations. Check both known
error codes.
Benchmark usage fixed.
Do leaf CRL check by default
Correct wolfSSL_sk_X509_NAME_push return check
Update OpenSSL compatibility errors for HAProxy
Change X509_V to literal constant values
Fix the compat layer with TLS session ticket reuse
Fix for tls1_2 session resume and cache miss
Save intitial wolfSSL ctx
Check for OpenSSL CRL error code 23
Sean Parkinson
Takashi Kojo
kaleb-himes
Daniel Pouzzner
JacobBarthelmeh
David Garske
Juliusz Sosinowicz
Lealem Amedie
John Safranek
Colton Willey
oltolm
Kareem
Andras Fekete
Anthony Hu
Jon Shallow
John Bland
kaleb_himes
jordan
TakayukiMatsuo
Marco Oliverio
Lealem Amedie
Marco Oliverio
Hideki Miyazaki
Anthony Hu
Chris Conlon
Eric Blankenhorn
Stanislav Klima
Brett
Dimitri Papadopoulos
gojimmypi
Juliusz Sosinowicz
Tesfa Mael