Allows configurations without RSA, DH and ECC but with Curve25519
algorithms to work with SSL/TLS using X25519 key exchange and Ed25519
certificates.
Fix Ed25519 code to call wc_Sha512Free().
Add certificates to test.h and fix examples to use them.
* Fixes to support certificate generation (`WOLFSSL_CERT_GEN`) without RSA enabled.
* Added new ECC CA for 384-bit tests.
* Created new server cert chain (ECC CA for 256-bit that signs server-ecc.pem)
* Created new `./certs/ecc/genecc.sh` script for generating all ECC CA's, generated server cert req (CSR), signing with CA and the required CRL.
* Moved the wolfCrypt ECC CA / ECC cert gen test into `ecc_test` as `ecc_test_cert_gen`.
* Refactor duplicate code that saves DER to disk, converts DER to PEM and saves PEM to disk into SaveDerAndPem function.
* Changed `ecc_test_make_pub` and `ecc_test_key_gen` to use XMALLOC for temp buffers (uses heap instead of stack).
* Cleanup to combine all certificate subject information into global `certDefaultName`.
* Updated cert request info to use wolfSSL instead of Yassl.
* Cleanup to combine keyUsage into `certKeyUsage` and `certKeyUsage2`.
* Re-number error codes in rsa_test.
* Moved the certext_test after the ecc_test, since it uses a file generated in `ecc_test_cert_gen`.
1. Make the decrypt and verify MAC failure cases behave the same with
respect to DTLS messages. It should pretend the message never happened.
2. Allow the echoclient to survive the echoserver sending a message with
a bad MAC.
3. Allow the server to survive the client sending a message with a bad MAC.
* Adds ./configure "--with-intelqa=../QAT1.6”, port files, memory management and README.md (see wolfcrypt/src/port/intel/).
* Added Intel QAT support for RSA public/private (CRT/non-CRT), AES CBC/GCM, ECDH/ECDSA, DH, DES3, SHA, SHA224, SHA256, SHA384, SHA512, MD5 and HMAC.
* wolfSSL async enabled all client and server: PKI, Encrypt/Decrypt, Hashing/HMAC and Certificate Sign/Verify.
* wolfSSL async support in functions: Encrypt, Decrypt, VerifyMAC, BuildMessage, ConfirmSignature, DoCertificate, ParseCertRelative, and MakeSignature.
* wolfCrypt test and benchmark async support added for all HW acceleration.
* wolfCrypt benchmark multi-threading support.
* Added QuickAssist memory overrides for XMALLOC, XFREE and XREALLOC. XREALLOC determines if existing pointer needs reallocated for NUMA.
* Refactor to make sure “heap” is available for async dev init.
* Added async support for all examples for connect, accept, read and write.
* Added new WC_BIGINT (in wolfmath.c) for async hardware support.
* Added async simulator tests for DES3 CBC, AES CBC/GCM.
* Added QAT standalone build for unit testing.
* Added int return code to SHA and MD5 functions.
* Refactor of the async stack variable handling, so async operations have generic args buffer area and cleanup function pointer.
* Combined duplicate code for async push/pop handling.
* Refactor internal.c to add AllocKey / FreeKey.
* Refactor of hash init/free in TLS to use InitHashes and FreeHashes.
* Refactor of the async event->context to use WOLF_EVENT_TYPE_ASYNC_WOLFSSL for WOLFSSL* and WOLF_EVENT_TYPE_ASYNC_WOLFCRYPT for WC_ASYNC_DEV*.
* Suppress error message for WC_PENDING_E.
* Implemented "wolfSSL_EVP_MD_CTX_init" to do memset.
* Cleanup of the openssl compat CTX sizes when async is enabled.
* Cleanup of AES, DES3, DH, SHA, MD5, DES3, DH, HMAC, MD5 for consistency and readability.
* Cleanup of the OPAQUE_LEN.
* Cleanup to use ENCRYPT_LEN instead of sizeof(ssl->arrays.preMasterSecret).
* Changed ssl->arrays.preMasterSecret to use XMALLOC (accelerates HW operations)
* Reduce verbosity with debug enabled for "GetMyVersion", "wolfSSL Using RSA OAEP padding" and "wolfSSL Using RSA PKCSV15 padding".
* Updated RSA un-padding error message so its different than one above it for better debugging.
* Added QAT async enables for each algorithm.
* Refactor of the async init to use _ex.
* Added WC_ASYNC_THRESH_NONE to allow bypass of the async thresholds for testing.
* Reformatted the benchmark results:
PKI: "RSA 2048 private HW 18522 ops took 1.003 sec, avg 0.054 ms, 18467.763 ops/sec"
Crypto/Hashing: SHA-256 SW 350 megs took 1.009 seconds, 346.946 MB/s Cycles per byte = 9.87
* Added min execution time for all benchmarks.
* Moved wc_*GetHash and wc_*RestorePos to appropriate files so use of isCopy flag is local.
* Fix for ECC sign status sometimes being invalid due to uninitialized ECC digest in benchmark.
* Added new DECLARE_VAR/FREE_VAR and DECLARE_ARRAY/FREE_ARRAY macros for helping setup test/benchmark variables to accelerate async.
* Added NO_SW_BENCH option to only run HW bench.
* Added support for PRNG to use hardware SHA256 if _wc devId provided.
* Fix to prevent curve tests from running against wrong curve sizes. Changed wc_ecc_set_curve to match on exact size.
* Added the wc_*GetHash calls to the wolfCrypt tests.
* Added async hardware start/stop to wolfSSL init/cleanup.
* Refactor to add wc_*Copy for hashing context (for async), which replaces wc_*RestorePos.
* Fixes for building with TI hashing (including: SHA224, missing new API’s and building with dummy build for non hw testing). Note: We need to add build test for this `./configure CFLAGS="-DWOLFSSL_TI_HASH -DTI_DUMMY_BUILD”`.
* Added arg checks on wc_*GetHash and wc_*Copy.
* Cleanup of the BuildMD5, BuildSHA, BuildMD5_CertVerify and BuildSHA_CertVerify functions.
* Added new ./configure --enable-asyncthreads, to allow enable/disable of the async threading support. If --enable-asynccrypt set this will be enabled by default if pthread is supported. Allows multi-threaded benchmarks with async simulator.
* Added checks for all hashing to verify valid ->buffLen.
* Fix for SHA512 scan-build warning about un-initialized “W_X”.
* Fix for valgrind un-initialized use of buffer in AllocDer (der->buffer) and BuildTlsFinished handshake_hash.
* Refactor of the benchmarking to use common function for start, check and finish of the stats.
* Fixed issue with ECC cache loading in multi-threading.
* Fix bug with AESNI not aligned code that assumes XMALLOC is 16-byte aligned.
* Added new WC_ASYNC_NO_… options to allow disabling of individual async algorithms. New defines are: WC_ASYNC_NO_CRYPT, WC_ASYNC_NO_PKI and WC_ASYNC_NO_HASH. Additionally each algorithm has a WC_ASYNC_NO_[ALGO] define.
* Added “wolfSSL_GetAllocators” API and fixed the wolfCrypt memcb_test so it restores callback pointers after test is complete (fixes issue with using custom allocators and test breaking it).
1. Update the example client and server to test DTLS-SCTP.
2. Modify the test.h functions for setting up connections to allow
for a SCTP option.
3. Update other examples to use the new test.h functions.
4. Removed some prototypes in the client header file were some functions
that should have been static to the client.c file and made them static.
Chris Conlon
John Safranek
Sean Parkinson
David Garske
Takashi Kojo
toddouska
Jacob Barthelmeh
Takashi Kojo
kaleb-himes
kaleb-himes
Vikram Adiga