fa86c1aa91
Configuration: enable all, disable TLS 1.3 - turn off TLS 1.3 only options
...
configuration: --enable-all --disable-tls13
Post-handshake authentication and HRR cookie are enable with
'--enable-all' but disabling TLS 1.3 caused configure to fail.
Don't enable these TLS 1.3 only options when TLS 1.3 is disabled.
Also fix up tests that don't work without TLS 1.3 enabled.
2021-01-06 14:19:57 +10:00
9598c03716
Free mutex and fix test script
2020-12-30 17:40:15 -08:00
c482d16029
Merge pull request #3544 from haydenroche5/ocsp_stapling_bug
...
Fix bug where OCSP stapling wasn't happening even when requested by client
2020-12-29 14:23:10 -08:00
eeefe043ec
scripts/: nix `timeout` wrappers in ocsp-stapling.test and ocsp-stapling2.test, for portability.
2020-12-16 17:31:53 -06:00
801aa18b9e
Fix bug where OCSP stapling wasn't happening even when requested by client.
...
The OCSP request that we created didn't have a URL for the OCSP responder, so
the server couldn't reach out to the responder for its cert status.
2020-12-15 16:56:21 -06:00
367f28b917
Merge pull request #3443 from SparkiDev/tls13_psk_no_dhe
...
TLS 1.3: PSK only
2020-12-09 09:45:34 -08:00
5fdc4cf6e1
Fix RX/TX throughput reporting in example server.
...
- I observed that client TX throughput < client RX throughput, but server TX
throughput > server RX throughput. Turns out this is just a typo in the
printing of the stats. The RX stat was being printed as the TX stat and vice-
versa.
- I added a note to scripts/benchmark.test about a 2 second sleep we do waiting
for the server to come up. If you were to time this script with the time
command, you'll see that 2 seconds in the result, which might be confusing
if you didn't realize the sleep was there.
2020-12-08 16:49:09 -06:00
b0979f4225
Merge pull request #3476 from dgarske/sniffer_hrr
...
Fixes for TLS sniffer with v1.3 (HRR and Certs)
2020-11-18 16:07:11 -08:00
d8b58286d1
TLS 1.3: PSK only
...
Support building with only TLS 1.3 and PSK without code for (EC)DHE and
certificates.
Minimise build size for this configuration.
2020-11-19 09:21:24 +10:00
d208779974
Added test case for TLS v1.3 with HRR (hello_retry_request)
2020-11-12 08:59:10 -08:00
1cbc2e8608
openssl.test: recognize TLS13-AES128-CCM-8-SHA256 and TLS13-AES128-CCM8-SHA256 as equivalent while iterating through $wolf_ciphers.
2020-11-11 23:23:28 -06:00
5625929c83
scripts/external.test: skip test when -UHAVE_ECC.
2020-11-10 01:27:45 -06:00
196ae63eb2
scripts/external.test: skip test when -DWOLFSSL_SNIFFER (staticCipherList in client.c is incompatible).
2020-11-10 00:03:02 -06:00
3858bda7e9
add "module", "modules_install", and "clean_module" rules to BUILD_LINUXKM section of Makefile.am, and add working install rule to linuxkm/Makefile, so that "make module" and "make modules_install" now work when --enable-linuxkm; fix "make dist" logic in Makefile.am and scripts/include.am to be unaffected by --enable-linuxkm; don't build wolfcrypt/benchmark or testwolfcrypt when --enable-linuxkm and --enable-crypttests.
2020-11-04 14:13:39 -06:00
139b0431cb
ocsp-stapling*.test: prefix waited servers with "timeout 60" to avoid deadlock failure modes; grep output from "openssl s_client" in "test interop fail case" for expected error message ("self signed certificate in certificate chain").
2020-10-28 17:28:05 -05:00
0568ec304f
pass -4 flag to openssl and nc only when IPV6_SUPPORTED.
2020-10-28 17:28:05 -05:00
94a3f86dcd
scripts/ocsp-stapling*.test: check if IPv6 is supported by the installed openssl and nc executables, and if not, don't attempt to wrestle the version. with no IPv6 support, and an --enable-ipv6 wolfssl build, skip the test entirely. also, restore a couple -b (bind-all-interfaces) flags to examples/server/server recipes in case that's useful.
2020-10-28 17:28:05 -05:00
7a5cbaa9bc
fix scripts/ocsp-stapling*.test to accommodate IPv6 examples/ client/server build.
2020-10-28 17:28:05 -05:00
81849e64b8
scripts/openssl.test: for "-psk" cases, use "-psk key", not "-psk=key", for OpenSSL 1.0.2 compatibility.
2020-10-21 23:30:14 -05:00
60b0b0170b
TLS OCSP Stapling: MUST staple option
...
Can enable OCSP Must Staple option to mean that if the client sends a
request for an OCSP Staple then it must receive a response.
2020-10-16 09:03:27 +10:00
9df9fb7936
unit.test: add bwrap wrapper script at scripts/unit.test.
2020-09-17 12:03:44 -05:00
5ed2fe8092
scripts/: more race elimination/mitigation.
2020-09-17 12:03:44 -05:00
26901d1cd9
scripts/ocsp-stapling2.test: eliminate races.
2020-09-17 12:03:44 -05:00
b669f8eeb9
scripts/: tweak scripts/include.am to run ocsp tests before rather than after testsuite and unit.test; revert POSIXish scripts/*.test to use /bin/sh.
2020-09-14 16:06:45 -05:00
d8dc6be5b9
scripts/ocsp-stapling2.test: try using a static prechecked port for the servers on ready_file5 too.
2020-09-12 01:13:35 -05:00
51046d45d3
add bwrapping on all other scripts/*.test except those that make Internet connections, and remove test for setuid bit, as some systems are configured to not require setuid/CAP_NET_ADMIN for CLONE_NEWNET.
2020-09-12 00:20:38 -05:00
1e9971f64c
scripts/ocsp-stapling*.test: add bwrap attempt at top, to isolate network namespace.
2020-09-11 18:20:27 -05:00
8f25456f86
scripts/ocsp-stapling*.test, wolfssl/test.h: refactor scripts/ocsp-stapling*.test for orthogonality and robustness, with retries and early failure detection. also, reduce sleeps in ocsp-stapling-with-ca-as-responder.test to 0.1, matching sleeps in other 2 scripts. finally, in wolfssl/test.h, #ifdef SO_REUSEPORT do that when binding ports, and add optional rendering of errno strings for failed syscalls using err_sys_with_errno() when -DDEBUG_TEST_ERR_SYS_WITH_ERRNO.
2020-09-11 15:30:37 -05:00
7fd51cf9d9
Merge pull request #3267 from SparkiDev/no_client_auth
...
Get builds with WOLFSSL_NO_CLIENT_AUTH compiling and testing
2020-09-03 15:55:38 -07:00
9901eb9272
Merge pull request #3249 from SparkiDev/tls13_early_data_fix
...
TLS 1.3 Early Data: fix
2020-09-03 14:49:39 -07:00
89b9a77eca
Get builds with WOLFSSL_NO_CLIENT_AUTH compiling and testing
...
Fix build for no client or server and no client auth.
Fix tests to detect when no client auth compiled and test is trying to
do client auth.
2020-09-01 15:27:46 +10:00
db864be6a4
TLS 1.3 Early Data: fix
...
Will process early data packets now.
Added test to check output of server for early data being received.
2020-08-31 09:03:05 +10:00
6a984da53f
Fixes and Improvements to OCSP scripts. Fix for OCSP test with IPV6 enabled (use `-b` bind to any on server). Fix to use random port number for the `oscp-stapling.test` script. Reduce delay times in scripts.
2020-08-25 10:55:41 -07:00
ceed98b952
Modify the openssl test script to run the openssl commands in an eval.
2020-08-12 16:59:10 -07:00
93cdfd7132
Update OpenSSL interopability testing
...
Added TLS 1.3 testing.
Added Ed25519 and Ed448 testing.
Added tesitng of OpenSSL client against wolfSSL server.
Fixed builds of Curve25519/Curve448/Ed25519/Ed448 in different
configurations.
2020-08-11 16:44:45 +10:00
70aa11f0a9
Merge pull request #3153 from ethanlooney/15th_branch
...
Added unit tests for Logging.c
2020-07-28 16:35:31 -06:00
563806c497
Changed the log dump txt file's directory to include /tests and added it to make clean
2020-07-23 10:12:40 -07:00
b500a54fc5
Added new file to read in and dump error message and added cleanup within cleanup script
2020-07-21 12:30:43 -07:00
e6017de19d
Fix in `snifftest` to try loading private key into static ephemeral and private key. Updated pcap files (were missing TCP packets).
2020-07-20 11:10:46 -07:00
23a3ead758
Framework for new TLS v1.3 sniffer tests.
2020-07-17 15:56:56 -07:00
42f3a6d7a4
Put both potential roots for login.live.com into collection for stapling test
2020-07-07 16:02:48 -06:00
392e09c474
Cleanup after TLS 1.3 tests
...
Make sure the server is dead after each test.
Client may not connect to server if cipher suite not supported and
return error as expected.
2020-06-23 09:14:51 +10:00
1d01b87741
Fix to detect if `NO_CERTS` / `--disable-asn` is used in `scripts/tls13.test`.
2020-06-04 16:08:08 -07:00
ba9fd89314
Script Portability
...
1. The openssl interop test script should check that it should run before
doing anything else.
2. The process to create a random port number was using a non-portable
option to the head command. Changed to use the od tool reading from
/dev/random.
3. Ran into a sed that doesn't use the -i option, so changed it to cp its
own bak file and sed from that.
2020-05-18 09:04:41 -07:00
0a6b93fda2
add single quotes around -? in test scripts
2020-03-24 22:40:48 -06:00
6334dd9cb0
Allow mutual authentication to be required for TLS 1.3
2020-03-02 08:50:57 +10:00
6b4551c012
Merge pull request #2654 from cariepointer/qt-512-513
...
Add Qt 5.12 and 5.13 support
2020-01-10 17:34:23 -07:00
b83804cb9d
Correct misspellings and typos from codespell tool
2019-12-24 12:29:33 -06:00
ee13dfd878
Add Qt 5.12 and 5.13 support
...
Co-Authored-By: aaronjense <aaron@wolfssl.com>
Co-Authored-By: MJSPollard <mpollard@wolfssl.com>
Co-Authored-By: Quinn Miller <quinnmiller1997@users.noreply.github.com>
Co-Authored-By: Tim Parrish <timparrish@users.noreply.github.com>
2019-12-06 14:27:01 -07:00
abee442c1e
Useful script to cleanup test files created.
2019-11-18 15:08:54 -08:00
Sean Parkinson
Tesfa Mael
John Safranek
Daniel Pouzzner
Hayden Roche
toddouska
David Garske
Chris Conlon
Ethan Looney
kaleb-himes
Jacob Barthelmeh
Eric Blankenhorn
Carie Pointer