Fixed flash driver, added documentation, tested

arch.mk

@@ -617,7 +617,13 @@ ifeq ($(TARGET),mcxa)
       -I$(MCUXPRESSO)/drivers \
       -I$(MCUXPRESSO)/drivers/common \
       -I$(MCUXPRESSO_CMSIS)/Include \
-      -I$(MCUXPRESSO_CMSIS)/Core/Include
+      -I$(MCUXPRESSO_CMSIS)/Core/Include \
+      -I$(MCUXPRESSO)/drivers/flash \
+      -I$(MCUXPRESSO)/drivers/mcx_spc \
+      -I$(MCUXPRESSO)/drivers/sysmpu \
+      -I$(MCUXPRESSO)/drivers/ltc \
+      -I$(MCUXPRESSO)/drivers/port \
+      -I$(MCUXPRESSO)/drivers/gpio
   CFLAGS+=-DCPU_$(MCUXPRESSO_CPU) -DDEBUG_CONSOLE_ASSERT_DISABLE=1
   CFLAGS+=-DWOLFSSL_SP_NO_UMAAL
   CFLAGS+=-Wno-old-style-declaration
@@ -627,14 +633,6 @@ ifeq ($(TARGET),mcxa)
       $(MCUXPRESSO_DRIVERS)/drivers/fsl_clock.o \
       $(MCUXPRESSO)/drivers/mcx_spc/fsl_spc.o \
 	  $(MCUXPRESSO_DRIVERS)/project_template/clock_config.o
-
-    CFLAGS+=\
-      -I$(MCUXPRESSO)/drivers/flash \
-      -I$(MCUXPRESSO)/drivers/mcx_spc \
-      -I$(MCUXPRESSO)/drivers/sysmpu \
-      -I$(MCUXPRESSO)/drivers/ltc \
-      -I$(MCUXPRESSO)/drivers/port \
-      -I$(MCUXPRESSO)/drivers/gpio
 endif
 
 ifeq ($(TARGET),mcxw)
@@ -648,7 +646,13 @@ ifeq ($(TARGET),mcxw)
       -I$(MCUXPRESSO)/drivers/ccm32k \
       -I$(MCUXPRESSO)/drivers/common \
       -I$(MCUXPRESSO_CMSIS)/Include \
-      -I$(MCUXPRESSO_CMSIS)/Core/Include
+      -I$(MCUXPRESSO_CMSIS)/Core/Include \
+      -I$(MCUXPRESSO)/drivers/flash \
+      -I$(MCUXPRESSO)/drivers/spc \
+      -I$(MCUXPRESSO)/drivers/sysmpu \
+      -I$(MCUXPRESSO)/drivers/ltc \
+      -I$(MCUXPRESSO)/drivers/port \
+      -I$(MCUXPRESSO)/drivers/gpio
   CFLAGS+=-DCPU_$(MCUXPRESSO_CPU) -DDEBUG_CONSOLE_ASSERT_DISABLE=1
   CFLAGS+=-DWOLFSSL_SP_NO_UMAAL
   CFLAGS+=-Wno-old-style-declaration
@@ -660,15 +664,6 @@ ifeq ($(TARGET),mcxw)
 	  $(MCUXPRESSO_DRIVERS)/project_template/clock_config.o \
       $(MCUXPRESSO)/drivers/ccm32k/fsl_ccm32k.o \
       $(MCUXPRESSO_DRIVERS)/drivers/fsl_romapi.o
-
-    CFLAGS+=\
-      -I$(MCUXPRESSO)/drivers/flash \
-      -I$(MCUXPRESSO)/drivers/spc \
-      -I$(MCUXPRESSO)/drivers/sysmpu \
-      -I$(MCUXPRESSO)/drivers/ltc \
-      -I$(MCUXPRESSO)/drivers/port \
-      -I$(MCUXPRESSO)/drivers/gpio
-
 endif
 
 ifeq ($(TARGET),imx_rt)

config/examples/mcxa.config

@@ -2,9 +2,9 @@ ARCH?=ARM
 TARGET?=mcxa
 SIGN?=ECC256
 HASH?=SHA256
-MCUXSDK?=0
-MCUXPRESSO?=$(PWD)/../NXP/MCXA153
-MCUXPRESSO_CMSIS?=$(MCUXPRESSO)/CMSIS
+MCUXSDK?=1
+MCUXPRESSO?=$(PWD)/../NXP/mcux-sdk
+MCUXPRESSO_CMSIS?=$(PWD)/../NXP/CMSIS_5/CMSIS
 MCUXPRESSO_CPU?=MCXA153VLH
 MCUXPRESSO_DRIVERS?=$(MCUXPRESSO)/devices/MCXA153
 DEBUG?=0

config/examples/mcxw.config

@@ -2,9 +2,9 @@ ARCH?=ARM
 TARGET?=mcxw
 SIGN?=ECC256
 HASH?=SHA256
-MCUXSDK?=0
-MCUXPRESSO?=$(PWD)/../NXP/MCXW71
-MCUXPRESSO_CMSIS?=$(MCUXPRESSO)/CMSIS
+MCUXSDK?=1
+MCUXPRESSO?=$(PWD)/../NXP/mcux-sdk
+MCUXPRESSO_CMSIS?=$(PWD)/../NXP/CMSIS_5/CMSIS
 MCUXPRESSO_CPU?=MCXW716CMFTA
 MCUXPRESSO_DRIVERS?=$(MCUXPRESSO)/devices/MCXW716C
 DEBUG?=0
@@ -15,7 +15,7 @@ NO_MPU=1
 EXT_FLASH?=0
 SPI_FLASH?=0
 ALLOW_DOWNGRADE?=0
-NVM_FLASH_WRITEONCE?=0
+NVM_FLASH_WRITEONCE?=1
 NO_ARM_ASM=1
 WOLFBOOT_VERSION?=0
 V?=0

docs/Targets.md

@@ -19,6 +19,7 @@ This README describes configuration of supported targets.
 * [NXP LPC54xxx](#nxp-lpc54xxx)
 * [NXP LS1028A](#nxp-ls1028a)
 * [NXP MCXA153](#nxp-mcxa153)
+* [NXP MCXW716C](#nxp-mcxw716c)
 * [NXP P1021 PPC](#nxp-qoriq-p1021-ppc)
 * [NXP T1024 PPC](#nxp-qoriq-t1024-ppc)
 * [NXP T2080 PPC](#nxp-qoriq-t2080-ppc)
@@ -2241,6 +2242,85 @@ mon reset
 c
 ```
 
+## NXP MCXW716
+
+NXP MCXW716 is a Cortex-M33 microcontroller running at 96MHz.
+The support has been tested using FRDM-MCXW716 with the onboard MCU-Link configured in JLink mode.
+
+This requires the MCXW SDK from the NXP MCUXpresso SDK Builder. We tested using [mcux-sdk](https://github.com/nxp-mcuxpresso/mcux-sdk) and [CMSIS_5](https://github.com/nxp-mcuxpresso/CMSIS_5)` 
+placed under "../NXP". Adjust the MCUXPRESSO and MCUXPRESSO_CMSIS variables in your .config file according to your paths.
+
+### MCX W: Configuring and compiling
+
+Copy the example configuration file and build with make:
+
+```sh
+cp config/examples/mcxw.config .config`
+make
+```
+
+### MCX W: Loading the firmware
+
+The NXP Freedom MCX W board debugger comes loaded with MCU Link, but it can be updated to JLink. See https://docs.nxp.com/bundle/UM12012/page/topics/Updating_MCU_Link_firmware.html
+
+Use JLinkExe tool to upload the initial firmware: `JLinkExe -if swd -Device MCXW716`
+
+At the Jlink prompt, type:
+
+```
+loadbin factory.bin 0
+Downloading file [factory.bin]...
+J-Link: Flash download: Bank 0 @ 0x00000000: Skipped. Contents already match
+O.K.
+```
+
+Reset or power cycle board.
+
+Once wolfBoot has performed validation of the partition and booted the D15 Green LED on P3_13 will illuminate.
+
+### MCX W: Testing firmware update
+
+1) Sign the test-app with version 2:
+
+```sh
+./tools/keytools/sign --ecc256 test-app/image.bin wolfboot_signing_private_key.der 2
+```
+
+2) Create a bin footer with wolfBoot trailer "BOOT" and "p" (ASCII for 0x70 == IMG_STATE_UPDATING):
+
+```sh
+echo -n "pBOOT" > trigger_magic.bin
+```
+
+3) Assembly new factory update.bin:
+
+```sh
+./tools/bin-assemble/bin-assemble \
+  update.bin \
+    0x0    test-app/image_v2_signed.bin \
+    0xAFFB trigger_magic.bin
+```
+
+4) Flash update.bin to 0x13000 (`loadbin update.bin 0x13000`). The D15 RGB LED Blue P3_0 will show if version is > 1.
+
+Note: For alternate larger scheme flash `update.bin` to `0x14000` and place trigger_magic.bin at `0x9FFB`.
+
+### MCX W: Debugging
+
+Debugging with JLink:
+
+Note: We include a `.gdbinit` in the wolfBoot root that loads the wolfboot and test-app elf files.
+
+In one terminal: `JLinkGDBServer -if swd -Device MCXW716 -port 3333`
+
+In another terminal use `gdb`:
+
+```
+b main
+mon reset
+c
+```
+
 
 ## TI Hercules TMS570LC435
 

hal/mcxw.c

@@ -75,9 +75,6 @@ void hal_init(void)
     /* Clock setting  */
     BOARD_BootClockRUN();
 #endif
-
-    /* Flash driver init */
-    flash_config_t pflash;
     /* Clear the FLASH configuration structure */
     memset(&pflash, 0, sizeof(pflash));
     /* FLASH driver init */