* Fixed PPC spin table based on ePAPR 1.1.
* Added flattened device tree (FDT) support. Setting required FDT fields per ePAPR 1.1.
* Added Frame Manager microcode upload.
* Fixed CPLD and setting QE clock.
* Added support for setting logical device numbers and updated device tree.
* Fixed QUICC Engine base address (was incorrect, should be 0x140000).
* Fixed "cpu-release-addr" to use 64-bit value.
* Added secondary cached boot page.
* Added L2 cache support to multi-core.
* Added flattened device tree parser tool for testing (`make fdt-parser` and `tools/fdt-parser/fdt-parser`).
* Added checks for FDT header.
* Added automated test case for NXP T1024 FDT.
leave the encryption key for wolfBoot_success to erase.
FINAL_SWAP was also stopping the case where the partition was put into testing before the update sector status flags could be erased. now, don't erase the update sector flags. instead put the update partition in IMG_STATE_FINAL_FLAGS state before putting the boot partition in IMG_STATE_TESTING. Then only erase the update sector flags on wolfBoot_update_trigger. under this scheme, the sector flags are intact if the power failed before we could set IMG_STATE_TESTING but are wiped if we do need to swap over after after wolfBoot_success fails to be called
repeatable steps so that power failure wont erase the encryption key and wont cause skipping the testing phase of boot. this is done by marking the update partition as final swap when erasing the final sector and backing up the key in boot sector 0 after swaping the real boot sector 0 to swap. then when a power failure occurs the encryption key will be available in either boot sector 0 or the normal location. the intermediate phase also prevents skipping the testing phase since the last sector, which holds the boot state, is erased and then set repeatably, since the final swap state is set on the update partition
* Added DDR4 w/ECC.
* Added L2 and L2 CPC SRAM support
* Added platform SRAM 160KB support
* Added support for core timers (timebase) and platform clock.
* Added IFC driver with erase/write
* Added stage 1 loader to relocate wolfBoot to DDR
* Added CPLD, QUICC, FMAN and MP drivers
* Added eSPI driver for TPM.
* Added hal_early_init instead of calling ddr_init directly.
* Fixes for device tree (DTB) loading with update_ram and PPC boot.
* Fixes for relocating CCSRBAR to upper.
* Fixes for interrupt offsets.
* Added new `WOLFBOOT_TPM_SEAL` and `WOLFBOOT_TPM_SEAL_NV_BASE` config options.
* Added new `tools/tpm/policy_create` tool for assisting with creation of a policy digest. The sign keytool `--policy=file` signs the policy.
* Added new `WOLFBOOT_TPM_VERIFY` option to enable offloading of the asymmetric verification to the TPM. By default wolfCrypt will be used.
* Added example seal/unseal to update_flash for ARCH_SIM.
* Renamed `WOLFBOOT_TPM_KEYSTORE_NV_INDEX` to `WOLFBOOT_TPM_KEYSTORE_NV_BASE` to support multiple public keys.
* Refactored most TPM code into tpm.c.
* Refactored the keystore ROT to use new `wolfBoot_check_rot` API.
* Refactored the sign keytool to have a sign_digest function to allow signing firmware and policy for sealing/unsealing.
* Fix for make distclean && make using the wrong key tools.
* Added ELF32 and ELF64 loader support (config `ELF=1` or build option `WOLFBOOT_ELF`).
* Add ELF support to `update_ram.c` loader.
* Add support for loading entire flash image to RAM when `EXT_FLASH=1` and `NO_XIP=1` (or `WOLFBOOT_USE_RAMBOOT`).
* Added QUICC Engine support to load microcode and enable.
* Add multiple core support for NXP P1021.
* Fixes to resolve first stage boot ROM relocation.
- Implemented temporary workaround to resolve stack traps.
* Added PPC GOT relocation support.
* Fix for the PPC `isr_empty` handler address.
* Fix to allow stack to use DDR by having assembly setup DDR TLB. After relocating wolfBoot use stack on DDR.
* Cleanup wolfBoot output.
- Only remove extra .bin/.elf created unless `make distclean` is used.
- Don't output the key grep test (only check result).
- Adjust build order (first stage, wolfboot, test app, key, sign test app and factory).
- Fix to make sure linker script is rebuilt before objects.
Sample NXP P1021 Output:
```
Relocating BOOT ROM to DDR
Loading wolfBoot to DDR
Jumping to full wolfBoot
wolfBoot HAL Init
Flash Init: Ret 0, ID 0x76207620
QE: Length 63732, Count 1
QE: uploading 'Microcode for P1021 r1.0' version 0.0.1
QE: Traps 0
MP: Starting core 2 (spin table 0xFFFFF240)
Versions: Boot 1, Update 0
Trying Boot partition at 0x200000
Loading header 512 bytes to 0x1DFFFE00
Loading image 3170724 bytes to 0x1E000000
Image size 3170724
Firmware Valid
Loading elf at 0x1E000000
Found valid elf32 (big endian)
Booting at 0x6000
```
this update uses the tpm to retreive the public key used to validate the image that will boot and restricts access to that key by tpm policy. when the image is updated it's signature is used to extend the PCR and when the image is loaded it's signature must match what was sealed in order to get the public key from the tpm. enabling this option is done by setting WOLFBOOT_TPM_KEYSTORE in .config
* Added Aarch64 boot/startup support
* Added configuration templates for Raspberry Pi 3 and Xilinx ZynqMP UltraScale+
* Added Xilinx Zynq QSPI bare-metal Driver
* Added `NO_XIP` option for full `ext_flash_*` API on all partitions
* Added Xilinx SDK Project Template
* Added support for DTS image partitions
* Added wolfBoot signing tool in Native C (`tools/keytools/sign.c`).
* Added libwolfboot functions `int wolfBoot_fallback_is_possible(void);` and `int wolfBoot_dualboot_candidate(void);`
* Performance improvement to only hash application firmware image once
* HiFive1 HAL Support for PLL Clock, UART, RTC and Flash QSPI Erase/Write.
* HiFive1 update demo application for accepting firmware updates over UART.
* Added test-update-server application for pushing firmware image over UART.
* Fixes for building with `make SIGN=ECC256`.
* Improvements to wolfCrypt `user_settings.h`.
* General library cleanup (license headers and formatting)
* Updated the wolfSSL submodule to latest.
* Documentation updates including new `Targets.md` section for hardare instructions.
Daniele Lacamera
David Garske
John Bland
Hideki Miyazaki
Lealem Amedie
Chris Conlon