- wolfSSH_OutputPending() moves from wolfssh/internal.h to
wolfssh/ssh.h as a WOLFSSH_API taking a const WOLFSSH*, defined
in src/ssh.c beside the other public calls.
- wolfSSH_worker() puts the send's code in the return in place of
an event when the flush fails outright, and gates its flush on
wolfSSH_OutputPending(). wolfssh/ssh.h states both.
- Both wolfsshd shell loops, both echoservers and
ReceiveScpMessage() dispatch on wolfSSH_worker()'s return, and
call wolfSSH_get_error() only to tell a transient failure from a
terminal one. The POSIX wolfsshd loop sets wantWrite from
wolfSSH_OutputPending().
- Five worker tests expect the send's code where they expected the
event, and tests/testsuite.c calls wolfSSH_OutputPending().
- ScpStreamRead() calls _DumpExtendedData() and reads again when
wolfSSH_stream_read() returns WS_EXTDATA, reporting the drain's
own failure when it has one.
- ReceiveScpConfirmation() drops its WS_EXTDATA arm and reports a
negative read directly.
- ReceiveScpMessage() returns _DumpExtendedData()'s failure in place
of discarding it.
ReceiveScpConfirmation() takes a WS_EXTDATA off ScpStreamRead()'s
return, the rule ssh.h now states for reading an event.
FlushQueuedSend() samples the owed write with the session still
locked, since the peer reader thread writes ssh->error too, and
reports a send that failed there over the event it rode in on.
- A pass that delivers stderr while its flush short-writes returns
WS_EXTDATA with WS_WANT_WRITE in ssh->error, so the confirmation
read aborted the transfer with the stderr undrained.
- wolfSSH_stream_read() on the reader thread clears ssh->error with
this thread's packet still queued, which ended the flush early and
reported it a success.
- An event return with a hard send error latched collapsed to
WS_SUCCESS, telling the caller a queued packet reached a socket
that was gone.
- tcp_select_write() joins tcp_select(), with WS_SELECT_SEND_READY
at the end of the enum. tcp_select() passes NULL for writefds and
cannot wait on the write side.
- The Windows wolfsshd window-change drain and sftp_worker()'s
handshake flush retry wait on it. The drain records a give-up in
ret, and sftp_worker() breaks only on WS_SELECT_ERROR_READY.
- The echoserver, Espressif and both wolfsshd shell loops, and
ReceiveScpMessage(), take the event from wolfSSH_worker()'s
return when it carries one, in place of reading ssh->error alone.
The two echoservers cover WS_CHAN_RXD, WS_REKEYING,
WS_CHANNEL_CLOSED and WS_EOF; the wolfsshd loops and
ReceiveScpMessage() cover the ones they have arms for.
- The POSIX wolfsshd loop takes an owed write into wantWrite before
the event overwrites rc, and its WS_WANT_WRITE arm runs the
channel drain below in place of skipping it.
- FlushQueuedSend() folds the receive's own statuses into
WS_SUCCESS inside its loop and keeps flushing while
wolfSSH_get_error() reports WS_WANT_WRITE within the deadline, in
place of looping on the worker's return. It reports
WS_WANT_WRITE when the deadline leaves the packet queued.
- wolfSSH_worker() calls wolfSSH_SendPacket() whenever
ssh->outputBuffer holds bytes and the session is not
disconnected. ssh->error keeps the receive's code when the
receive failed, and the close's when a WS_CHANNEL_CLOSED pass
hard-failed its flush; WS_REKEYING is withheld on a failed
flush. Drops the second DoReceive(), the WOLFSSH_TEST_BLOCK
fork and the separate WS_CHANNEL_CLOSED flush.
- BundlePacket() resets ssh->outputBuffer.length to
ssh->packetStartIdx when the framing fails. wolfSSH_shutdown()
reports WS_WANT_WRITE when its close-read leaves output queued,
and the send's own error in place of it when that send failed.
SendPacketFlush() records its code in ssh->error on every
transport failure path, and wolfSSH_TriggerKeyExchange() writes
it only when SendKexInit() fails.
- portfwd, client and scpclient accept WS_WANT_WRITE from
wolfSSH_shutdown(); in scpclient the close-message drain runs
on it.
- wolfssh/ssh.h drops WS_WINDOW_FULL from wolfSSH_worker() and says
to read the return and wolfSSH_get_error() as independent channels
on every pass.
- Twenty unit tests and the extended TestWorkerReportsDisconnect
cover what ret and ssh->error hold after a receive, send, buffer,
callback or framing failure.
test_wolfSSH_set_fd() compares the NULL return of wolfSSH_get_fd()
against the platform invalid-socket sentinel, the value wolfSSH_new()
initializes rfd/wfd to. The old check only asserted the result was not
WS_SUCCESS, which the previous WS_BAD_ARGUMENT return also satisfied.
wolfSSH_accept() hands a session to the built-in SCP or SFTP server
only when the request naming it was answered CHANNEL_SUCCESS. A
callback that refuses one sends CHANNEL_FAILURE, yet sessionType and
command are recorded ahead of that answer and stay set, so the diverts
read a refused session as a served one.
- gate both diverts on channel->sessionGranted, as
wolfSSH_SFTP_accept() already gates the app-channels path
- the SCP divert tests the channel list itself, having no command
lookup ahead of it to do that
- cover each divert with a refused request and a granted control
DoChannelRequest() returns early when the header parse fails, so the
ret == WS_SUCCESS test that followed it could never be false. The
channel lookup moves into the else, which is the only way the function
reaches it.
Issue: F-11657
The peer's exec or subsystem command line is wiped ahead of both frees
that release it, ChannelDelete() and the GetStringAlloc() that replaces
it on a repeat request, the way ChannelDelete() already wipes the
decrypted inputBuffer just above. A command line can carry a password
or a token among its arguments.
- ScrubChannelCommand() leaves the free to GetStringAlloc(), so a parse
that fails behind it holds no dangling pointer
- cover both wipes with the retain-on-free allocator, the replacement
through wolfSSH_TestDoChannelRequest()
- release the test's hand-built channel on a setup failure
Issue: F-8850
DoChannelRequest() records the session type and asks the exec and
subsystem callbacks whether to grant a session only when the command
string parsed. A failed parse is refused on ret alone, and
channel->command still holds an earlier request's value rather than the
one being answered.
- cover a command length header running past the end of the packet, on
exec and on subsystem
Issue: F-11674
An application vetting an exec or subsystem request in its channel
request callback is handed the command as a C string, which stops at an
embedded NUL. wolfSSH_ChannelGetSessionCommandSz() and
wolfSSH_GetSessionCommandSz() report the parsed wire length, so a
callback can match a name whole the way DoChannelRequest() does.
- both accessors report 0 for a NULL channel or session
- wolfSSH_GetSessionCommand() defers to the channel accessor
- the sftp divert in wolfSSH_accept() asks the accessor for the length
- correct the trace name in wolfSSH_ChannelGetSessionCommand()
- cover a callback seeing "sftp\0evil" through exec and subsystem
CheckSftpAcceptRefusesUngranted() drives the same refusal two ways, a
registered subsystem callback saying no and app channels standing in
for a missing one, and asserted nothing that told them apart. Assert
the call count each case expects.
The built-in SFTP server takes a session only when the subsystem name
is sftp, matched whole. DoChannelRequest() keeps the parsed length in
channel->commandSz, so neither wolfSSH_SFTP_accept()'s grant gate nor
wolfSSH_accept()'s divert serves "sftpx" or "sftp\0evil".
- cover a granted name longer than sftp, one of its length, and one
running past an embedded NUL
- cover the divert with those three names and a control that diverts
- exec keeps its command length too
Issue: F-11665
wolfSSH_SFTP_accept() serves an application-driven session only on a
channel whose subsystem request was answered CHANNEL_SUCCESS.
DoChannelRequest() records the session type and command before it
decides, and leaves both set on a refusal, so they cannot say by
themselves whether anything was granted.
- add channel->sessionGranted, set from the answer a shell, exec or
subsystem request gets rather than from the request arriving
- look the channel up again before recording it: a callback may close
its own channel, and wolfSSH_ChannelFree() frees it
- log a request's strings where they are known good: once the parse
has succeeded, and ahead of a callback that may free the channel
- gate the app-channels path on that flag alongside the session type
and the command
- cover a refusal from both sides, no callback registered and a
callback that rejects, and a callback that frees its channel
In application-driven mode wolfSSH_accept() parks at userauth, so the
sftp test its divert applies never runs. wolfSSH_SFTP_accept() applies
it itself: the session channel must be a subsystem the application's
callback granted sftp on, or the call returns WS_INVALID_STATE_E and
leaves the wire alone without recording an error.
- gate the app-channels branch on wolfSSH_GetSessionType() and
wolfSSH_GetSessionCommand(), the same test accept() makes
- ask for that grant in every accept state: below the user-auth stop
accept() returns with no channel open, and past the stop there is no
accept() left that could have checked anything
- say in ssh.h that the mode serves SFTP through that grant and never
reaches the SCP entry point
- regress.c refuses the call with no channel, ahead of accept(), on a
granted shell and on an established one, and serves an INIT on a
granted sftp subsystem
DoChannelRequest() reads ssh->appChannels when the request arrives, so
turning the mode on after accept() established the session still refuses
an uncallbacked shell, exec or subsystem request from then on. Only
accept()'s stopping point is pinned, by the guard around stopState.
- say the flag reaches the requests that follow, and that what it cannot
do is move where accept() returns
- drive a shell request over the wire in both modes from the late-enable
test, pinning the behaviour the header now describes
wolfSSH_SetAppChannels() changes where wolfSSH_accept() stops and what
becomes of a session request with no callback behind it, so both modes
are exercised.
- regress.c drives a server with the pivot on, one with a shell
callback and one without, and checks accept() stops at
ACCEPT_SERVER_USERAUTH_SENT
- regress.c pins the context setter, the session's inheritance of it,
and that turning it on after accept() established the session still
returns
- regress.c re-enters a parked accept() with output still queued, which
is the one path that flushes before reading the state, and pins that
it leaves the state on the stop
- unit.c checks DoChannelRequest() refuses a shell, exec and subsystem
request with no callback once the pivot is on
A server that wants to own its channels had no way to get them: accept()
ran the session state machine to the end, and a shell, exec or subsystem
request with no callback registered was granted regardless.
- add wolfSSH_CTX_SetAppChannels() and wolfSSH_SetAppChannels(), off by
default, a byte on the context copied into the session
- on, accept() returns once the user is authenticated, and a session
request with no callback behind it is refused: nothing is left to serve
- keep the stop state out of the pending-send advance, so a re-entry with
queued output cannot step over where this call is meant to stop
- stop early only while the session is short of that state, so turning the
mode on afterward cannot leave the loop hunting a state it went past
- teach wolfSSH_SFTP_accept() that the mode parks accept() short of an
established session, so it stops redoing the handshake on every poll
- The WOLFSSH_ZEPHYR branch of FindNextDirEntry() loops while the
entry name is "." or "..", matching the POSIX and Windows
branches, in place of while (1).
- tests/api.c gains test_wolfSSH_SCP_SendRecursiveEntry(), staging a
directory holding one file and driving three
WOLFSSH_SCP_RECURSIVE_REQUEST calls through wsScpSendCallback(),
checking the entry name, size, and bytes placed in buf. dirPath
is rooted at CONFIG_WOLFSSH_SFTP_DEFAULT_DIR under WOLFSSH_ZEPHYR
and at "./scp_recur_entry" otherwise.
- The test is gated on WOLFSSH_SCP, with WOLFSSH_SCP_USER_CALLBACKS,
NO_FILESYSTEM and NO_WOLFSSH_DIR unset, carries an empty stub
otherwise, and is called from wolfSSH_ApiTest().
- scpStageRecurFile() writes that fixture file.
Issue: F-13315
- DoChannelOpen refuses an auth-agent open on a server endpoint, and on
a client with the agent disabled or connectState below
CONNECT_CLIENT_CHANNEL_AGENT_REQUEST_SENT.
- Both answer OPEN_ADMINISTRATIVELY_PROHIBITED; the ssh->agent check
stays as the resource check behind them.
- Cover the refusals before the request, with the agent disabled, over
an accepting channelOpenCb, and on a server, plus the accepted open
past the request; each refusal asserts ssh->error stays clean.
- Move TestAgentChannelNullAgentSendsOpenFail to a client harness, and
have the agent tests set the agent flag explicitly.
Issue: F-13389
Every run of this job rebuilt wolfSSL --enable-all from source on a
Windows runner, about five minutes, even though the ref is pinned
and the configure flags never change between runs.
Add an actions/cache step keyed on wolfssl-mingw-regress-wolfssl-
<ref>-windows-latest, matching the naming singlethread-check.yml and
x509-interop.yml use. Those two split the work into a build_wolfssl
job and a build_wolfssh job, with a lookup-only cache check in the
first and a fail-on-cache-miss restore in the second. This job has
no such split, so it uses a single plain actions/cache step instead:
it restores on a hit and saves automatically after the job on a
miss.
The MSYS2 shell's $HOME lives under setup-msys2's own temp install
directory, not a path stable across runner images, so build to
${{ github.workspace }}/wolfssl-install instead: actions/cache
resolves a relative path against GITHUB_WORKSPACE, and cygpath -u
gives the msys2 shell steps the same directory as $WOLFSSL_INSTALL.
TEST_NULL_DEVICE, TEST_SETENV, TEST_UNSETENV, and TEST_MKDIR were
gated on USE_WINDOWS_API, while the arpa/inet.h/direct.h include
guard a few lines above keys on _WIN32. Whether mkdir(), setenv(),
and /dev/null work as expected is a libc availability question, not
a wolfSSH API-selection one, so _WIN32 is the more direct fit and
now both guards in this file agree.
No behavior change: USE_WINDOWS_API is only ever set when _WIN32 is
already defined, so this does not change which branch any current
build takes.
Verified with the MinGW cross compiler both with WOLFSSH_SFTP defined
and without, and confirmed a plain Linux build still passes
tests/regress.test and tests/unit.test.
The wolfssl checkout in mingw-regress had no ref, so it always built
against wolfssl/wolfssl's default branch. An upstream change there
could break this job with nothing changed on the wolfssh side to
explain it, and this job in particular turned out to be sensitive to
exact wolfSSL build details while it was being brought up.
Pin it to v5.9.1-stable, the same tag singlethread-check.yml and
x509-interop.yml already use, confirmed to include wc_mlkem.c so the
ML-KEM coverage this job exercises is still built. The build and
asan-tests jobs in this file have the same unpinned checkout but are
left alone here, since they were not touched by this change.
A local run with ./configure --enable-smallstack (no --enable-sftp)
showed WMKDIR as an implicit, undeclared function under MinGW.
wolfssh/port.h only defines WMKDIR when WOLFSSH_SFTP, WOLFSSH_SCP, or
WOLFSSH_SSHD is enabled, but TestKnownHostsLastEntry itself is gated
on WOLFSSL_BASE64_ENCODE alone, so it compiles in configurations
where none of those three are on and WMKDIR does not exist.
Add a small TEST_MKDIR macro next to the existing TEST_SETENV and
TEST_UNSETENV ones, backed directly by _mkdir() under USE_WINDOWS_API
and mkdir() otherwise, and use it in place of WMKDIR. The Windows
branch needs direct.h for _mkdir's declaration; include it next to
the existing _WIN32 guard around arpa/inet.h at the top of the file.
Verified with the MinGW cross compiler both with WOLFSSH_SFTP defined
and without, and confirmed a plain Linux build configured with
--enable-smallstack (no --enable-sftp) still passes tests/regress.test
and tests/unit.test.
The next mingw-regress failure after the previous fix was
TestKnownHostsLastEntry failing its "ready" assertion. It calls
open("/dev/null", O_RDONLY) to point stdin at EOF while it drives the
known_hosts prompt, but Windows has no /dev/null; the call simply
fails there, so open() returns -1 and every check gated on ready is
skipped.
Add a TEST_NULL_DEVICE macro that resolves to "NUL" under
USE_WINDOWS_API and "/dev/null" otherwise, and use it at both call
sites in this file: TestKnownHostsLastEntry, and the same pattern in
TestPasswordEofNoCrash a bit earlier, which happens to be masked in
CI by its own isatty() guard but would hit the same bug if ever run
against a real terminal on Windows.
CI's mingw-regress job showed AppendKeyToFile writing a known_hosts
entry, then TestAppendKeyToFile reading it back and finding a byte
mismatch on Windows. The file was opened with WFOPEN(..., "a"), a
text mode append. On Windows the C runtime rewrites '\n' to CRLF on
write in text mode, so the entry landed on disk with a trailing
"\r\n" instead of the "\n" the test wrote and expected back.
Open the file in binary mode instead, matching the WriteTextFile test
helper a few hundred lines above in tests/regress.c, which already
uses "wb" for the same reason. known_hosts is conventionally
LF-terminated regardless of platform, so this also matches the format
other SSH clients expect from the file, not just the test.
apps/wolfssh/common.c declared a CONSOLE_SCREEN_BUFFER_INFO local in
ClientSetEcho that nothing ever read; the Windows echo toggling never
grew the code that would have used it. Drop the unused declaration.
wolfssh/port.h defined WSTRSEP as strsep(), a BSD extension MSVCRT
and MinGW do not provide. Add a portable wstrsep() in src/port.c,
matching the wstrnstr/wstrncat/wstrdup pattern already used for other
missing string functions, and route WSTRSEP through it under
USE_WINDOWS_API.
tests/regress.c called the two argument POSIX mkdir(path, mode) and
setenv()/unsetenv() directly in TestKnownHostsLastEntry. Use the
existing WMKDIR macro for the directory creation, and add small
TEST_SETENV/TEST_UNSETENV macros backed by _putenv_s() on Windows so
the HOME juggling this test does still works there.
src/wolfsftp.c had three separate issues in code paths that had never
been compiled before this job existed. wolfSSH_SFTP_RecvOpen declared
a flagsAndAttrs DWORD that nothing read, since WS_CreateFileA is
called with a hardcoded FILE_ATTRIBUTE_NORMAL instead.
wolfSSH_SFTP_RecvOpenDir compared a signed loop counter against a
sizeof expression while building ssh->driveList, so make the counter
word32. wolfSSH_SFTP_Put passed &state->rSz, an int, to ReadFile()'s
DWORD* output parameter; read into a local DWORD and copy it into
state->rSz afterward, since that field is also assigned from
WFREAD() on non-Windows builds.
src/wolfterm.c's wolfSSH_DoOSC never used its handle parameter. Mark
it with WOLFSSH_UNUSED rather than removing it, since the parameter
matches the signature its two call sites already pass and future OSC
handling such as window titles is a natural use for it.
Verified against a real x86_64-w64-mingw32 cross compiler with a
config.h edited to match the sizes and header availability the
actual Windows CI run reported (SIZEOF_LONG 4, HAVE_SYS_IOCTL_H
undefined, and so on): every file this job compiles builds cleanly
under the same -Werror flag set. Also reconfirmed a clean, unmodified
Linux build still passes both tests/regress.test and tests/unit.test.
MinGW-w64 does not ship arpa/inet.h; guard tests/regress.c's include
the same way apps/wolfsshd/auth.c already does, since htonl/ntohl end
up declared via the winsock2.h wolfSSL's headers pull in later in the
same translation unit.
wolfssh/test.h guarded its MSVC #pragma warning(disable:4996) with
USE_WINDOWS_API alone, which is also true for MinGW's gcc; gcc treats
the unrecognized pragma as an error under -Werror. Require _MSC_VER
too, matching the existing ALIGN16 pragma guard in wolfssh/internal.h.
wolfSSH_CleanPath's Windows/Nucleus drive-letter cleanup re-declared
`i` in a nested scope, shadowing the function's own `i` used by every
other loop in the function. Hoist `j` to the function's declarations
(guarded by the same #if so non-Windows/Nucleus builds don't get an
unused-variable warning) and drop the now-unnecessary block so the
loop reuses the outer `i`.
Verified locally: autoreconf + configure + make tests/regress.test
tests/unit.test builds clean and both binaries pass on Linux.
The new run showed the ws2_32/crypt32 link fix worked (configure
passed) but make then failed: "No rule to make target
'tests/regress.test'." Reproducing the autotools build locally
confirmed why: MinGW's EXEEXT is ".exe", so automake's check_PROGRAMS
rule names the binaries tests/regress.test.exe and tests/unit.test.exe,
not the extension-less names this job was asking make to build and run.
config.log from a failing run showed the wolfCrypt_Init AC_CHECK_LIB
probe pulling in ssl.c/internal.c/wolfio.c from the static
libwolfssl.a, leaving Winsock (socket, send, recv, inet_pton, ...) and
cert store (CertOpenSystemStoreA, ...) symbols unresolved. A shared
build would defer that resolution to the DLL; the static archive here
needs ws2_32 and crypt32 passed explicitly via LIBS.
The mingw-regress job's wolfssh configure step fails with
"libwolfssl is required for wolfssh" even though libwolfssl.a is
installed at the expected path. AC_CHECK_LIB only reports pass/fail;
dump config.log on failure to see the actual link error.
The Windows StartSSHD() path rebuilds argv from GetCommandLineW(). A
regression there left -D foreground mode walking the raw wide command
line, so -f and -p were ignored and the daemon used its built-in
defaults. Nothing in CI caught that.
Add sshd_dash_d_test.ps1: it starts wolfsshd with -D and a config file
at a non-default path whose Port line differs from the -p value, then
checks the listener binds the -p port and not the config port. That
holds only when -D mode parsed both -f and -p. Run it from the Windows
build job next to the existing LoginGraceTime check.
tests/regress.c holds the only coverage for the Windows SFTP open path,
including TestSftpWindowsOpenFlagMatrix, which walks the RecvOpen
CREAT/EXCL/TRUNC/APPEND matrix against the CreateFile() disposition
table. That test is guarded by USE_WINDOWS_API and ran in no CI job. The
MSVC solution in ide/winvs has no regress project, and regress.c does not
build with cl because it includes arpa/inet.h and unistd.h, so the
disposition fix it locks down could regress unnoticed.
Add an MSYS2 MinGW64 job to the Windows workflow. MinGW defines _WIN32,
so wolfssh/settings.h turns on USE_WINDOWS_API and the Windows-only
branches compile and run. The job builds wolfSSL static, configures
wolfSSH with --enable-sftp, and runs tests/regress.test and
tests/unit.test. wolfsshd is left out: its autotools path is not
MinGW-clean and the MSVC solution already covers it.
Added more test vectors as well as locking in behavior of VerifyProtoId
Added round trip test for proto id
Comment fixes
New define for proto id min size
wolfSSH_CTX_SetSshProtoIdStr() now rejects a string that is not
CRLF-terminated, exceeds 255 bytes counting the terminator, or
carries a CR or LF in the body. DoKexInit() subtracts the two
terminator bytes from the length when hashing it, so an
unterminated string underflowed the hash length.
Issue: F-10571
partial progress
- _GetHomeDirectory loads the user's profile when WOLFSSHD_AUTH's new
profile member is NULL, setting PROFILEINFO.dwSize first and keeping
the returned hProfile there.
- _GetProfileDirectory reads the home directory with
GetUserProfileDirectoryW, in place of SHGetKnownFolderPath and the
%USERPROFILE% expansion. CheckPublicKeyWIN calls it directly, so a
caller that has not authenticated the user builds no profile.
- wolfSSHD_AuthCloseToken unloads the profile before closing the token,
calling RegCloseKey when the unload fails.
- The Windows shell cleanup calls RevertToSelf() before closing the auth
token rather than after.
- windows-sftp.yml gains a no_profile job that covers an exec session,
two overlapping sessions, and SFTP for users created with net user
alone; it skips the earlier SFTP step so its exec session connects
first.
- Both Windows workflows log testuser on once so Windows builds a real
profile, in place of writing the home directory and ProfileList entry
by hand, and the recursive icacls grants on it are gone.
Issue: F-13326
- windows-sftp.yml generates an ecdsa key for testuser, authorizes it,
and builds a source tree holding two files, a nested subdirectory
and an empty one.
- A new step pulls that tree with scp -O -r and fails unless every
file and directory arrives. -O keeps OpenSSH on the legacy SCP
protocol rather than SFTP.
- The header comment lists the recursive SCP scenario.
- WS_FindNextFileA_ex() takes a lastError out-parameter and carries
the body of WS_FindNextFileA(), which now calls it with NULL. A
failing return reports the FindNextFileW() error, or
ERROR_NO_UNICODE_TRANSLATION when the name would not convert.
- FindNextDirEntry() calls WS_FindNextFileA_ex() on Windows. An
ERROR_NO_MORE_FILES result frees ctx->entry, sets it to NULL and
returns WS_NEXT_ERROR so the caller pops the directory; every other
error still returns WS_FATAL_ERROR.
Issue: F-13316
wolfSSH_AGENT_ChannelOpen() settles its channel and agent on whether
the open reached the peer, which SendPacketDelivered() answers from the
flush count. The highwater callback runs after the last byte is out, so
its failure arrives as this send's return, and the rollback read that
as a send that never left.
- give SendPacketDelivered() external linkage, contract in internal.h
- note in agent.h that an error raised once the open is on the wire
leaves the channel open
- test a failing highwater callback: the channel and the agent stand,
and the poll after it is the idempotent one
wolfSSH_AGENT_ChannelOpen() answers a poll on a session that is over
with WS_FATAL_ERROR and WS_DISCONNECT in ssh->error, the shape every
other public sender uses: no channel opened, nothing on the wire,
RFC 4253 section 11.1. wolfSSH_accept() gates the open it drives, so
the new public entry point is the only way in.
- promote SendAfterDisconnect() to WOLFSSH_LOCAL so agent.c uses the
same helper as every other public sender
- leave an open queued before the disconnect unflushed, the rule
wolfSSH_shutdown() applies to all but its own disconnect
- keep WS_DISCONNECT in ssh->error at the accept() call site, which
used to overwrite it with the status the open returns
The one server-side site that opens auth-agent@openssh.com sits inside
wolfSSH_accept(), so an application driving its own channels cannot
reach it: the session records the request and no channel follows.
- add wolfSSH_AGENT_ChannelOpen(), the same open lifted out of accept(),
which still calls it
- it reports WS_BAD_ARGUMENT until the peer asks and on a client
session, and is idempotent after, so an application can poll it
- publish the agent on a queued open too, so a retry after WS_WANT_WRITE
finds it rather than opening a second channel and leaking the first
- flush what is left of a queued open on the next call, rather than
reporting a success the peer never saw
- record ssh->error from the send alone, so neither a poll ahead of the
request nor a failed allocation stops accept() continuing
wolfSSH_SCP_accept() reported any want held in ssh->error in place of
the DoScpRequest() result. A short send that SendChannelData() accepts
leaves WS_WANT_WRITE there with nothing clearing it on a later flush,
so a terminal result came back as retryable and the retry re-entered
the state machine, re-sending an abort confirmation or reading past a
bad message.
- Substitute the want only when the result is WS_FATAL_ERROR and the
want is WS_WANT_READ, the one case GetInputData() hides by value.
- Leave write wants alone; the SCP state machine already returns them.
An application that binds an "scp ..." command to a channel itself has no
way to run the transfer; wolfSSH_accept() did it through a WS_SCP_INIT
re-entry only that state machine can drive.
- add wolfSSH_SCP_accept(), a wrapper over DoScpRequest() reporting
WS_SCP_COMPLETE for any non-negative result, as accept() does
- a receive-side want reaches the wrapper as a generic error with the
want in ssh->error, so report the want itself and let the caller retry
- state that resume contract beside the prototype, and clear a stale want
on entry the way the other re-entrant entry points do
wolfSSH_CTX_SetChannelOpenRespCb() had no caller anywhere in the tree, so
the confirm and fail hooks had no worked example and a forwarding client
had nothing to say which of its opens the peer refused.
- register both arms and print the channel each one names
- name our own id, not the peer's: a refused open never learns the peer's,
and it is the id portfwd_worker() already tracks
Yosuke Shimizu
John Safranek
Hideki Miyazaki
Aidan Keefe
JacobBarthelmeh