| .. |
|
board/zynqmp
|
zynqmp: wolfBoot ZynqMP FSBL with signed FIT Linux boot and EL3 security (eFuse/PUF/AES-CSU)
|
2026-07-22 11:56:40 +02:00 |
|
boards
|
Rename board.h to wolfHAL_board.h
|
2026-09-22 15:29:32 +02:00 |
|
i2c
|
i2c: add a bit-banged back-end selectable with I2C_BITBANG
|
2026-10-06 18:14:10 +02:00 |
|
rtl8735b
|
Add wolfBoot HAL port for RealTek RTL8735B (AmebaPro2)
|
2026-07-16 10:16:25 +02:00 |
|
spi
|
Add wolfBoot target for Infineon PSOC Control C3
|
2026-10-06 18:14:10 +02:00 |
|
uart
|
Add STM32H7S target with partitions on external Octo-SPI NOR
|
2026-10-11 21:45:53 -07:00 |
|
vorago
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
zynqmp
|
zynqmp: wolfBoot ZynqMP FSBL with signed FIT Linux boot and EL3 security (eFuse/PUF/AES-CSU)
|
2026-07-22 11:56:40 +02:00 |
|
aarch64_efi.c
|
aarch64_efi: address PR818 review (measure cmdline, DTB GUID, size/page/desc fixes)
|
2026-08-10 21:03:50 +02:00 |
|
aarch64_efi.ld
|
Add aarch64_efi target: wolfBoot as an AArch64 UEFI application
|
2026-08-10 21:03:50 +02:00 |
|
agilex5.c
|
Add Agilex 5 FCS and wolfBoot integration
|
2026-10-15 10:25:33 -07:00 |
|
agilex5.h
|
Add Agilex 5 FCS and wolfBoot integration
|
2026-10-15 10:25:33 -07:00 |
|
agilex5.its
|
Add Agilex 5 FCS and wolfBoot integration
|
2026-10-15 10:25:33 -07:00 |
|
agilex5.ld
|
Add Agilex 5 FCS and wolfBoot integration
|
2026-10-15 10:25:33 -07:00 |
|
armv8m_tz.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
aurix_tc3xx.c
|
Update docs and comment cleanup
|
2026-10-27 16:46:40 +01:00 |
|
aurix_tc3xx.ld
|
Expand TC3xx toolchain support:
|
2026-09-28 15:02:05 -06:00 |
|
aurix_tc3xx_hsm.c
|
AURIX tc3 ARCH/TARGET refactor anticipating TC4xx
|
2026-09-10 10:19:08 -06:00 |
|
aurix_tc3xx_hsm.ld
|
…
|
|
|
aurix_tc4xx.c
|
Improve support for ECC flash parts:
|
2026-10-27 16:46:40 +01:00 |
|
aurix_tc4xx_csrm.c
|
Support for AURIX TC4xx host and CSRM cores
|
2026-09-12 09:21:38 -06:00 |
|
cc26x2.c
|
tests: cover cc26x2 flash error propagation
|
2026-08-17 15:59:35 +02:00 |
|
cc26x2.ld
|
…
|
|
|
cm4.c
|
Add NXP i.MX 8QuadMax MEK port including BL33 support
|
2026-09-21 18:07:44 +02:00 |
|
cm4.h
|
Peer review fixes (thanks Jack)
|
2026-08-24 12:47:34 +02:00 |
|
cm4.its
|
Peer review fixes (thanks Jack)
|
2026-08-24 12:47:34 +02:00 |
|
cm4.ld
|
Peer review fixes (thanks Jack)
|
2026-08-24 12:47:34 +02:00 |
|
f28p55x.c
|
c2000: add wolfBoot TI C28x (TMS320F28P550SJ) secure-boot XIP port
|
2026-08-25 00:01:33 +02:00 |
|
f28p55x.ld
|
c2000: add wolfBoot TI C28x (TMS320F28P550SJ) secure-boot XIP port
|
2026-08-25 00:01:33 +02:00 |
|
filesystem.c
|
Add optional boot confirmation and rollback for the disk boot path
|
2026-09-29 07:41:43 +02:00 |
|
hal.c
|
fdt: boot a FIT with no kernel load/entry and no device tree
|
2026-10-23 11:49:49 -07:00 |
|
hifive1.c
|
F-12886: reject non-positive length in HiFive1 flash write
|
2026-09-24 12:03:20 +02:00 |
|
hifive1.ld
|
…
|
|
|
imx8qm.c
|
Add NXP i.MX 8QuadMax MEK port including BL33 support
|
2026-09-21 18:07:44 +02:00 |
|
imx8qm.h
|
Add NXP i.MX 8QuadMax MEK port including BL33 support
|
2026-09-21 18:07:44 +02:00 |
|
imx8qm.ld
|
Add NXP i.MX 8QuadMax MEK port including BL33 support
|
2026-09-21 18:07:44 +02:00 |
|
imx95_a55.c
|
imx95_a55: add the Cortex-A55 target and a stage 1 replacing U-Boot SPL
|
2026-10-15 15:27:28 -07:00 |
|
imx95_a55.h
|
imx95_a55: add the Cortex-A55 target and a stage 1 replacing U-Boot SPL
|
2026-10-15 15:27:28 -07:00 |
|
imx95_a55.ld
|
imx95_a55: add the Cortex-A55 target and a stage 1 replacing U-Boot SPL
|
2026-10-15 15:27:28 -07:00 |
|
imx95_a55_stage1.c
|
imx95_a55: add the Cortex-A55 target and a stage 1 replacing U-Boot SPL
|
2026-10-15 15:27:28 -07:00 |
|
imx95_a55_stage1.ld
|
imx95_a55: add the Cortex-A55 target and a stage 1 replacing U-Boot SPL
|
2026-10-15 15:27:28 -07:00 |
|
imx95_a55_stage1_start.S
|
imx95_a55: add the Cortex-A55 target and a stage 1 replacing U-Boot SPL
|
2026-10-15 15:27:28 -07:00 |
|
imx95_ahab.c
|
imx95_a55: add the Cortex-A55 target and a stage 1 replacing U-Boot SPL
|
2026-10-15 15:27:28 -07:00 |
|
imx95_ahab.h
|
imx95_a55: add the Cortex-A55 target and a stage 1 replacing U-Boot SPL
|
2026-10-15 15:27:28 -07:00 |
|
imx95_m7.c
|
imx95_a55: add the Cortex-A55 target and a stage 1 replacing U-Boot SPL
|
2026-10-15 15:27:28 -07:00 |
|
imx95_m7.h
|
imx95_a55: add the Cortex-A55 target and a stage 1 replacing U-Boot SPL
|
2026-10-15 15:27:28 -07:00 |
|
imx95_m7.ld
|
imx95_m7: align the resource_table section so remoteproc finds it
|
2026-08-24 18:46:41 +02:00 |
|
imx_rt.c
|
F-6399: fix imx_rt DCACHE invalidation to include down-alignment offset
|
2026-07-02 15:13:28 +02:00 |
|
imx_rt.h
|
F-6399: fix imx_rt DCACHE invalidation to include down-alignment offset
|
2026-07-02 15:13:28 +02:00 |
|
imx_rt.ld
|
…
|
|
|
imx_rt7xx.c
|
Align the i.MX RT700 HAL license headers to GPLv3
|
2026-09-24 13:12:36 +02:00 |
|
imx_rt7xx.h
|
Align the i.MX RT700 HAL license headers to GPLv3
|
2026-09-24 13:12:36 +02:00 |
|
imx_rt7xx.ld
|
Add a TrustZone secure application boot config for the i.MX RT700
|
2026-09-24 13:12:36 +02:00 |
|
imx_rt_hab.ld
|
…
|
|
|
kinetis.c
|
F-14130: guard zero-length erase in the kinetis HAL
|
2026-09-24 02:34:03 +02:00 |
|
kinetis.ld
|
…
|
|
|
kinetis_kl26.c
|
Address Copilot comments
|
2026-05-07 21:39:34 +02:00 |
|
kinetis_kl26.ld
|
Kinetis KL26 port
|
2026-05-07 21:39:34 +02:00 |
|
kontron_vx3060_s2.c
|
nai_68int6: add wolfBoot target for the NAI 68INT6 (Intel Tiger Lake UP3) OpenVPX SBC
|
2026-10-14 21:56:32 -07:00 |
|
library.c
|
Address minor PR 882 review nits
|
2026-09-04 16:39:26 +02:00 |
|
library_fs.c
|
Add optional boot confirmation and rollback for the disk boot path
|
2026-09-29 07:41:43 +02:00 |
|
lpc.c
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
lpc.ld
|
…
|
|
|
lpc55s69-ns.ld
|
Address copilot pr comments.
|
2026-03-18 11:53:26 +01:00 |
|
lpc55s69.c
|
address pr comments
|
2026-10-23 13:53:08 -04:00 |
|
lpc55s69.ld
|
Use LLVM LDD with clang
|
2026-04-03 18:09:16 +02:00 |
|
m2354-ns.ld
|
Add Nuvoton NuMaker M2354 Cortex-M23 target with TrustZone
|
2026-09-14 18:08:40 +02:00 |
|
m2354.c
|
Add Nuvoton NuMaker M2354 Cortex-M23 target with TrustZone
|
2026-09-14 18:08:40 +02:00 |
|
m2354.h
|
Add Nuvoton NuMaker M2354 Cortex-M23 target with TrustZone
|
2026-09-14 18:08:40 +02:00 |
|
m2354.ld
|
Add Nuvoton NuMaker M2354 Cortex-M23 target with TrustZone
|
2026-09-14 18:08:40 +02:00 |
|
max32666.c
|
F-7384: hal_flash_erase: erase to the end of the requested range
|
2026-09-23 02:46:16 +02:00 |
|
max32666.h
|
max32666: fix boot-time CPU and cache configuration
|
2026-08-13 08:41:23 +02:00 |
|
max32666.ld
|
Support for MAX32666
|
2026-07-31 14:33:56 +02:00 |
|
mcxa.c
|
F-14131: pass the byte length to FLASH_EraseSector
|
2026-09-24 12:01:43 +02:00 |
|
mcxa.ld
|
…
|
|
|
mcxn-ns.ld
|
MCXN non-TrustZone + TrustZone port
|
2026-01-22 18:55:46 +01:00 |
|
mcxn.c
|
Add an MCXN947 secure application handoff config with m33mu tests
|
2026-10-23 18:27:33 +01:00 |
|
mcxn.ld
|
Use LLVM LDD with clang
|
2026-04-03 18:09:16 +02:00 |
|
mcxw-ns.ld
|
Harden the NXP MCX W71 port and add console, timer and wolfCrypt-TZ
|
2026-10-09 21:04:57 +01:00 |
|
mcxw.c
|
Harden the NXP MCX W71 port and add console, timer and wolfCrypt-TZ
|
2026-10-09 21:04:57 +01:00 |
|
mcxw.h
|
Harden the NXP MCX W71 port and add console, timer and wolfCrypt-TZ
|
2026-10-09 21:04:57 +01:00 |
|
mcxw.ld
|
Harden the NXP MCX W71 port and add console, timer and wolfCrypt-TZ
|
2026-10-09 21:04:57 +01:00 |
|
mpfs-l2lim.yaml
|
PolarFire SoC M-Mode, QSPI and L2-LIM support
|
2026-03-09 07:29:27 +01:00 |
|
mpfs.dts
|
Support for Microchip PolarFire SoC (MPFS250)
|
2025-12-24 18:31:55 +01:00 |
|
mpfs.yaml
|
Working Secure boot of PolarFire SoC
|
2025-12-24 18:31:55 +01:00 |
|
mpfs250-hss.ld
|
PolarFire SoC M-Mode, QSPI and L2-LIM support
|
2026-03-09 07:29:27 +01:00 |
|
mpfs250-m.ld
|
PolarFire SoC: boot mode 2 User Boot Loader stub verifying the eNVM wolfBoot
|
2026-10-27 16:06:05 -07:00 |
|
mpfs250.c
|
PolarFire SoC: QSPI clock divider knob and word-mode FIFO reads
|
2026-10-27 16:06:05 -07:00 |
|
mpfs250.h
|
PolarFire SoC: QSPI clock divider knob and word-mode FIFO reads
|
2026-10-27 16:06:05 -07:00 |
|
mpfs250.its
|
Documentation cleanups
|
2025-12-24 18:31:55 +01:00 |
|
mpfs250.ld
|
Peer review fixes
|
2025-12-24 18:31:55 +01:00 |
|
mpfs250_ddr.c
|
PolarFire SoC: read DDR once after init so CPU writes land, drop the workarounds
|
2026-10-27 16:06:05 -07:00 |
|
mpfs250_snvm.c
|
PolarFire SoC: SBI vendor extension for the OS: PUF keys, System Controller services and flash access
|
2026-10-27 16:06:05 -07:00 |
|
mpfs250_snvm.h
|
PolarFire SoC: SBI vendor extension for the OS: PUF keys, System Controller services and flash access
|
2026-10-27 16:06:05 -07:00 |
|
mpfs250_ubl.c
|
PolarFire SoC: boot mode 2 User Boot Loader stub verifying the eNVM wolfBoot
|
2026-10-27 16:06:05 -07:00 |
|
mpfs250_ubl.h
|
PolarFire SoC: boot mode 2 User Boot Loader stub verifying the eNVM wolfBoot
|
2026-10-27 16:06:05 -07:00 |
|
mpfs250_ubl.ld
|
PolarFire SoC: boot mode 2 User Boot Loader stub verifying the eNVM wolfBoot
|
2026-10-27 16:06:05 -07:00 |
|
nai_68int6.c
|
nai_68int6: add wolfBoot target for the NAI 68INT6 (Intel Tiger Lake UP3) OpenVPX SBC
|
2026-10-14 21:56:32 -07:00 |
|
nrf52.c
|
nrf52/nrf5340/stm32l0: fix the 32-bit fast path in hal_flash_write
|
2026-08-12 13:20:56 +02:00 |
|
nrf52.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
nrf52.ld
|
…
|
|
|
nrf54l-ns.ld
|
Add nRF54LM20 support to the nRF54L port
|
2026-10-07 22:52:28 +01:00 |
|
nrf54l.c
|
Add nRF54LM20 support to the nRF54L port
|
2026-10-07 22:52:28 +01:00 |
|
nrf54l.h
|
Add nRF54LM20 support to the nRF54L port
|
2026-10-07 22:52:28 +01:00 |
|
nrf54l.ld
|
Add nRF54LM20 support to the nRF54L port
|
2026-10-07 22:52:28 +01:00 |
|
nrf5340-ns.ld
|
Explicitly place .keystore
|
2026-04-03 19:19:13 +02:00 |
|
nrf5340.c
|
hal: scrub the TRNG staging buffers without wolfCrypt
|
2026-09-30 19:59:33 +02:00 |
|
nrf5340.h
|
nrf5340: add memory clobber to DSB()
|
2026-09-15 14:32:18 +02:00 |
|
nrf5340.ld
|
Use LLVM LDD with clang
|
2026-04-03 18:09:16 +02:00 |
|
nrf5340_net.c
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
nrf5340_net.ld
|
…
|
|
|
nrf5340_uart.c
|
F-12883: nRF5340 uart_write CRLF dropped multiline tail data
|
2026-09-18 04:27:28 +02:00 |
|
nxp_esdhc.c
|
Add LS1028A eSDHC SD card disk boot support
|
2026-09-17 12:33:19 +02:00 |
|
nxp_lpc54s0xx.c
|
Peer review fixes
|
2026-04-22 14:10:55 +02:00 |
|
nxp_lpc54s0xx.ld
|
Rename LPC54S018M to LPC54S0XX
|
2026-04-22 14:10:55 +02:00 |
|
nxp_ls1028a-ocram.ld
|
…
|
|
|
nxp_ls1028a.c
|
fix Fenrir review: ls1028a test_flash return contract, x86 FSP stop bits
|
2026-09-24 12:48:08 +02:00 |
|
nxp_ls1028a.h
|
uart: replace the duplicated NS16550 console code with a shared driver
|
2026-09-21 18:12:32 +02:00 |
|
nxp_ls1028a.ld
|
Add NXP LS1028A ENETC wolfIP support
|
2026-07-30 13:29:09 +02:00 |
|
nxp_p1021.c
|
uart: replace the duplicated NS16550 console code with a shared driver
|
2026-09-21 18:12:32 +02:00 |
|
nxp_p1021.ld
|
…
|
|
|
nxp_p1021_stage1.bin
|
…
|
|
|
nxp_p1021_stage1.ld
|
…
|
|
|
nxp_ppc.c
|
uart: replace the duplicated NS16550 console code with a shared driver
|
2026-09-21 18:12:32 +02:00 |
|
nxp_ppc.h
|
Add T1040 eSDHC SD card disk boot support, first big-endian disk-boot target
|
2026-09-10 08:15:48 +02:00 |
|
nxp_t10xx.c
|
uart: replace the duplicated NS16550 console code with a shared driver
|
2026-09-21 18:12:32 +02:00 |
|
nxp_t1024.c
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
nxp_t1024.ld
|
Add T1040 eSDHC SD card disk boot support, first big-endian disk-boot target
|
2026-09-10 08:15:48 +02:00 |
|
nxp_t1024_stage1.ld
|
Add T1040 eSDHC SD card disk boot support, first big-endian disk-boot target
|
2026-09-10 08:15:48 +02:00 |
|
nxp_t1040.c
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
nxp_t1040.ld
|
Add T1040 eSDHC SD card disk boot support, first big-endian disk-boot target
|
2026-09-10 08:15:48 +02:00 |
|
nxp_t1040_stage1.ld
|
Add T1040 eSDHC SD card disk boot support, first big-endian disk-boot target
|
2026-09-10 08:15:48 +02:00 |
|
nxp_t2080.c
|
uart: replace the duplicated NS16550 console code with a shared driver
|
2026-09-21 18:12:32 +02:00 |
|
nxp_t2080.h
|
uart: replace the duplicated NS16550 console code with a shared driver
|
2026-09-21 18:12:32 +02:00 |
|
nxp_t2080.ld
|
NXP T2080 / CW VPX3-152: VxWorks 7 64-bit boot support
|
2026-06-15 06:13:28 +02:00 |
|
pic32c.c
|
F-9724: partial-flash-write uses bitwise NOT
|
2026-09-16 12:14:13 +02:00 |
|
pic32c.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
pic32ck.c
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
pic32ck.ld
|
…
|
|
|
pic32ck_registers.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
pic32cz.c
|
hal: pic32cz: specify that HSM direct loading is not for production
|
2026-08-13 08:58:01 +02:00 |
|
pic32cz.ld
|
…
|
|
|
pic32cz_registers.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
psoc6.c
|
Add external flash support and dual-bank flash swap functionality for PSoC6 devices.
|
2026-03-12 09:17:04 +01:00 |
|
psoc6.ld
|
…
|
|
|
psoc_c3.c
|
Add wolfBoot target for Infineon PSOC Control C3
|
2026-10-06 18:14:10 +02:00 |
|
psoc_c3.h
|
i2c: add a bit-banged back-end selectable with I2C_BITBANG
|
2026-10-06 18:14:10 +02:00 |
|
psoc_c3.ld
|
Add wolfBoot target for Infineon PSOC Control C3
|
2026-10-06 18:14:10 +02:00 |
|
raspi3.c
|
uart: add a non-blocking uart_rx() to the PL011 consoles
|
2026-10-23 11:48:36 -07:00 |
|
raspi3.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
raspi3.ld
|
…
|
|
|
renesas-ra.c
|
RA6M4 update
|
2026-03-04 19:05:31 +09:00 |
|
renesas-ra.h
|
adjust UART settings and update readme
|
2026-03-18 11:54:52 +01:00 |
|
renesas-rx.c
|
watchdog: add generic feed hook and RX driver
|
2026-07-30 15:32:31 +02:00 |
|
renesas-rx.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
renesas-rz.c
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
riscv.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
rp2350-app.ld
|
…
|
|
|
rp2350.c
|
F-12061: RP2350: RMW partial pages in hal_flash_write
|
2026-09-02 12:15:51 +02:00 |
|
rp2350.ld
|
Use LLVM LDD with clang
|
2026-04-03 18:09:16 +02:00 |
|
rtl8735b.c
|
F-6871: bound ext_flash_erase to the device size
|
2026-09-24 12:01:52 +02:00 |
|
rtl8735b.ld
|
Add wolfBoot HAL port for RealTek RTL8735B (AmebaPro2)
|
2026-07-16 10:16:25 +02:00 |
|
rw612-ns.ld
|
Add NXP RW612 target with TrustZone support
|
2026-10-09 17:06:01 +01:00 |
|
rw612.c
|
Add NXP RW612 target with TrustZone support
|
2026-10-09 17:06:01 +01:00 |
|
rw612.h
|
Add NXP RW612 target with TrustZone support
|
2026-10-09 17:06:01 +01:00 |
|
rw612.ld
|
Add NXP RW612 target with TrustZone support
|
2026-10-09 17:06:01 +01:00 |
|
rx65n.c
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
rx65n.ld
|
renesas-rx: fix build for GCC RX 8.3/14.2
|
2026-07-30 15:32:31 +02:00 |
|
rx72n.c
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
rx72n.ld
|
renesas-rx: fix build for GCC RX 8.3/14.2
|
2026-07-30 15:32:31 +02:00 |
|
s32k1xx.c
|
PR 892: P1021 NAND status bits + test coverage for F-12883/F-12922
|
2026-09-16 14:40:42 +02:00 |
|
s32k1xx.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
s32k1xx.ld
|
Add NXP S32K1xx support with full update functionality
|
2026-01-19 19:13:01 +01:00 |
|
sama5d3.c
|
bad-blocks: keep skipping cumulative
|
2026-08-24 12:38:47 +02:00 |
|
sama5d3.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
sama5d3.ld
|
Peer review fixes
|
2026-04-22 19:08:00 +02:00 |
|
same51.c
|
F-13654: index the NVM word fast path from the current offset
|
2026-09-24 02:49:58 +02:00 |
|
same51.ld
|
…
|
|
|
samr21.c
|
F-13654: index the NVM word fast path from the current offset
|
2026-09-24 02:49:58 +02:00 |
|
samr21.ld
|
…
|
|
|
sim.c
|
Improve support for ECC flash parts:
|
2026-10-27 16:46:40 +01:00 |
|
sim.ld
|
…
|
|
|
skeleton.c
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
stm32_tz.c
|
hal: scrub the TRNG staging buffers without wolfCrypt
|
2026-09-30 19:59:33 +02:00 |
|
stm32c0.c
|
F-14129: derive the C0 erase page from the flash-relative offset
|
2026-09-24 02:34:03 +02:00 |
|
stm32c0.ld
|
…
|
|
|
stm32c5.c
|
pkcs11 store: invalidate the flash read cache after every commit
|
2026-09-10 10:45:55 +02:00 |
|
stm32c5.h
|
Add STM32C5 target (NUCLEO-C5A3ZG)
|
2026-05-06 19:02:58 +02:00 |
|
stm32c5.ld
|
Add STM32C5 target (NUCLEO-C5A3ZG)
|
2026-05-06 19:02:58 +02:00 |
|
stm32f1.c
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
stm32f1.ld
|
…
|
|
|
stm32f4.c
|
F-12071: early-exit sector scan for sector-zero ranges
|
2026-09-24 07:07:07 +02:00 |
|
stm32f4.ld
|
…
|
|
|
stm32f7.c
|
F-12875: stm32f7 fix non-dual-bank sector 11 start address
|
2026-09-07 14:43:15 +02:00 |
|
stm32f7.ld
|
…
|
|
|
stm32g0.c
|
F-13655: index the flash double-word fast path from the current offset
|
2026-09-24 02:47:16 +02:00 |
|
stm32g0.ld
|
…
|
|
|
stm32g4.c
|
F-13655: index the flash double-word fast path from the current offset
|
2026-09-24 02:47:16 +02:00 |
|
stm32g4.h
|
hal: always define hal_cache_invalidate(), implement it on F4 and G4
|
2026-09-10 18:42:54 +02:00 |
|
stm32g4.ld
|
Peer review fixes (thanks Copilot)
|
2026-05-29 13:10:15 +02:00 |
|
stm32h5-ns.ld
|
Explicitly place .keystore
|
2026-04-03 19:19:13 +02:00 |
|
stm32h5.c
|
Enable the secure application handoff on STM32H5
|
2026-09-22 15:35:42 +02:00 |
|
stm32h5.h
|
Enable the secure application handoff on STM32H5
|
2026-09-22 15:35:42 +02:00 |
|
stm32h5.ld
|
Assert the STM32H5 secure link leaves room for the stack
|
2026-09-17 13:06:11 +02:00 |
|
stm32h5_lifecycle.h
|
Enable the secure application handoff on STM32H5
|
2026-09-22 15:35:42 +02:00 |
|
stm32h7.c
|
F-12871: compare against the absolute bank 2 base
|
2026-09-24 12:01:43 +02:00 |
|
stm32h7.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
stm32h7.ld
|
Fix CI tests
|
2026-04-03 20:29:03 +02:00 |
|
stm32h7s.c
|
Add STM32H7S target with partitions on external Octo-SPI NOR
|
2026-10-11 21:45:53 -07:00 |
|
stm32h7s.h
|
Add STM32H7S target with partitions on external Octo-SPI NOR
|
2026-10-11 21:45:53 -07:00 |
|
stm32h7s.ld
|
Add STM32H7S target with partitions on external Octo-SPI NOR
|
2026-10-11 21:45:53 -07:00 |
|
stm32l0.c
|
nrf52/nrf5340/stm32l0: fix the 32-bit fast path in hal_flash_write
|
2026-08-12 13:20:56 +02:00 |
|
stm32l0.ld
|
…
|
|
|
stm32l0_chacha_ram.ld
|
…
|
|
|
stm32l4.c
|
F-6758: hal_flash_write: derive DW base from address+i in else branch
|
2026-09-23 02:46:15 +02:00 |
|
stm32l4.ld
|
Added explicit discard list for clang compiler
|
2026-04-03 18:09:16 +02:00 |
|
stm32l4xx_hal_conf.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
stm32l5-ns.ld
|
Explicitly place .keystore
|
2026-04-03 19:19:13 +02:00 |
|
stm32l5.c
|
F-12877: STM32L5: program the 8-byte unit through an aligned pointer
|
2026-09-07 16:31:07 +02:00 |
|
stm32l5.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
stm32l5.ld
|
Use LLVM LDD with clang
|
2026-04-03 18:09:16 +02:00 |
|
stm32n6.c
|
Remove tracker ids from code, condense comments
|
2026-08-18 19:48:12 +02:00 |
|
stm32n6.h
|
Add wolfBoot port for STM32N6 (NUCLEO-N657X0-Q)
|
2026-05-28 16:49:57 +02:00 |
|
stm32n6.ld
|
Add wolfBoot port for STM32N6 (NUCLEO-N657X0-Q)
|
2026-05-28 16:49:57 +02:00 |
|
stm32u3.c
|
F-12106: report flash programming errors on STM32U3
|
2026-09-24 07:04:58 +02:00 |
|
stm32u3.h
|
F-3962: fix hal_flash_erase loop bound in stm32u3.c skipping final partial page
|
2026-06-11 18:23:51 +02:00 |
|
stm32u3.ld
|
Add wolfBoot port for STM32U3 (NUCLEO-U385RG-Q)
|
2026-04-27 17:00:41 +02:00 |
|
stm32u5-ns.ld
|
Explicitly place .keystore
|
2026-04-03 19:19:13 +02:00 |
|
stm32u5.c
|
stm32u5: skip programming quad-words that are erased and stay erased
|
2026-10-16 16:45:12 +02:00 |
|
stm32u5.h
|
Add uart driver for stm32u5
|
2026-07-31 16:00:14 +02:00 |
|
stm32u5.ld
|
Add support for ARM Compiler for Embedded on stm32u5
|
2026-07-31 16:00:14 +02:00 |
|
stm32u5.sct
|
Add support for ARM Compiler for Embedded on stm32u5
|
2026-07-31 16:00:14 +02:00 |
|
stm32u5_partition.h
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
stm32wb.c
|
F-6758: hal_flash_write: derive DW base from address+i in else branch
|
2026-09-23 02:46:15 +02:00 |
|
stm32wb.ld
|
Create STM32WB wolfHAL example. GC sections on all test apps
|
2026-06-10 17:12:25 +02:00 |
|
stm32wba.ld
|
Implement port for STM32WBA. Bump wolfHAL lib to latest
|
2026-07-02 08:44:45 +02:00 |
|
stm32wbxx_hal_conf.h
|
…
|
|
|
stub_loader.c
|
nai_68int6: add wolfBoot target for the NAI 68INT6 (Intel Tiger Lake UP3) OpenVPX SBC
|
2026-10-14 21:56:32 -07:00 |
|
tc3_cfg.h
|
AURIX tc3 ARCH/TARGET refactor anticipating TC4xx
|
2026-09-10 10:19:08 -06:00 |
|
tegra234.c
|
Add NXP i.MX 8QuadMax MEK port including BL33 support
|
2026-09-21 18:07:44 +02:00 |
|
tegra234.h
|
tegra234: bare-metal BL33 target with verified EL2->EL1 + device-tree boot
|
2026-08-18 11:01:45 +02:00 |
|
tegra234.ld
|
tegra234: bare-metal BL33 target with verified EL2->EL1 + device-tree boot
|
2026-08-18 11:01:45 +02:00 |
|
ti_hercules.c
|
F-9742: reject cross-bank flash erase on TI Hercules
|
2026-09-24 10:52:19 +02:00 |
|
ti_hercules.ld
|
…
|
|
|
va416x0.c
|
va416x0: fix vector table alignment and length, FRAM defects and ML-DSA
|
2026-09-21 17:13:42 +02:00 |
|
va416x0.h
|
va416x0: fix vector table alignment and length, FRAM defects and ML-DSA
|
2026-09-21 17:13:42 +02:00 |
|
va416x0.ld
|
va416x0: fix vector table alignment and length, FRAM defects and ML-DSA
|
2026-09-21 17:13:42 +02:00 |
|
versal.c
|
uart: add a non-blocking uart_rx() to the PL011 consoles
|
2026-10-23 11:48:36 -07:00 |
|
versal.h
|
Merge pull request #946 from dgarske/pl011_uart_rx
|
2026-10-23 15:55:28 -06:00 |
|
versal.its
|
versal: report EL2 exceptions, fix FIT ramdisk fixup and the EL2->EL1 cache handoff
|
2026-09-10 08:17:21 +02:00 |
|
versal.ld
|
versal: support DDR apertures above 1 TB in the translation table
|
2026-09-24 13:13:33 +02:00 |
|
wolfhal.c
|
Rename board.h to wolfHAL_board.h
|
2026-09-22 15:29:32 +02:00 |
|
x86_64_efi.c
|
x86_64_efi: early-return after remaining panic() sites under UNIT_TEST
|
2026-09-04 21:08:36 +02:00 |
|
x86_64_efi.ld
|
…
|
|
|
x86_fsp_qemu.c
|
Preparing release v2.8.0 + update copyright
|
2026-04-16 13:11:56 +02:00 |
|
x86_fsp_qemu.ld.in
|
Updated x86 linker scripts with missing variable
|
2026-03-17 22:19:32 +01:00 |
|
x86_fsp_qemu_stage1.ld.in
|
Updated x86 linker scripts with missing variable
|
2026-03-17 22:19:32 +01:00 |
|
x86_fsp_tgl.c
|
nai_68int6: add wolfBoot target for the NAI 68INT6 (Intel Tiger Lake UP3) OpenVPX SBC
|
2026-10-14 21:56:32 -07:00 |
|
x86_fsp_tgl.ld.in
|
Updated x86 linker scripts with missing variable
|
2026-03-17 22:19:32 +01:00 |
|
x86_fsp_tgl_stage1.ld.in
|
Updated x86 linker scripts with missing variable
|
2026-03-17 22:19:32 +01:00 |
|
x86_uart.c
|
x86: derive UART stop-bit field from requested stop count (F-12885)
|
2026-09-24 09:11:56 +02:00 |
|
zynq.c
|
zynqmp: report the PUF control fuses and correct the regeneration API
|
2026-10-26 19:59:53 +01:00 |
|
zynq.h
|
zynqmp: report the PUF control fuses and correct the regeneration API
|
2026-10-26 19:59:53 +01:00 |
|
zynq.ld
|
zynqmp: add non-cacheable DMA window and hal_dma_set_noncached()
|
2026-09-24 13:27:04 +02:00 |
|
zynq7000.c
|
Authenticate raw device tree via signed HDR_DEVICE_TREE_DIGEST TLV (Fenrir #7998)
|
2026-08-13 08:39:22 +02:00 |
|
zynq7000.h
|
Add wolfBoot FIT support for loading bitstream
|
2026-06-09 15:30:27 +02:00 |
|
zynq7000.ld
|
Add Xilinx Zynq-7000 (ZC702) wolfBoot port
|
2026-05-12 12:06:05 +02:00 |
|
zynqmp_atf.c
|
update_disk: fail closed when the boot-part DTB fixup does not land, and run it on the BL31 handoff
|
2026-10-07 20:44:28 -07:00 |
|
zynqmp_atf.h
|
zynqmp: wolfBoot ZynqMP FSBL with signed FIT Linux boot and EL3 security (eFuse/PUF/AES-CSU)
|
2026-07-22 11:56:40 +02:00 |
|
zynqmp_fsbl.its
|
zynqmp: wolfBoot ZynqMP FSBL with signed FIT Linux boot and EL3 security (eFuse/PUF/AES-CSU)
|
2026-07-22 11:56:40 +02:00 |
|
zynqmp_ocm.ld
|
versal: report EL2 exceptions, fix FIT ramdisk fixup and the EL2->EL1 cache handoff
|
2026-09-10 08:17:21 +02:00 |
|
zynqmp_psu_shim.c
|
zynqmp: wolfBoot ZynqMP FSBL with signed FIT Linux boot and EL3 security (eFuse/PUF/AES-CSU)
|
2026-07-22 11:56:40 +02:00 |
e5badf5ae5